Robust event-triggered model predictive control for straight-line trajectory tracking of underactuated underwater vehicles

Author(s):  
Changxin Liu ◽  
Jian Gao ◽  
Guangjie Zhang ◽  
Demin Xu
2018 ◽  
Vol 72 (2) ◽  
pp. 321-341 ◽  
Author(s):  
Zhen Hu ◽  
Daqi Zhu ◽  
Caicha Cui ◽  
Bing Sun

The trajectory tracking of Autonomous Underwater Vehicles (AUV) is an important research topic. However, in the traditional research into AUV trajectory tracking control, the AUV often follows human-set trajectories without obstacles, and trajectory planning and tracking are separated. Focusing on this separation, a trajectory re-planning controller based on Model Predictive Control (MPC) is designed and added into the trajectory tracking controller to form a new control system. Firstly, an obstacle avoidance function is set up for the design of an MPC trajectory re-planning controller, so that the re-planned trajectory produced by the re-planning controller can avoid obstacles. Then, the tracking controller in the MPC receives the re-planned trajectory and obtains the optimal tracking control law after calculating the object function with a Sequential Quadratic Programming (SQP) optimisation algorithm. Lastly, in a backstepping algorithm, the speed jump can be sharp while the MPC tracking controller can solve the speed jump problem. Simulation results of different obstacles and trajectories demonstrate the efficiency of the proposed MPC trajectory re-planning tracking control algorithm for AUVs.


Author(s):  
Mingcong Cao ◽  
Chuan Hu ◽  
Rongrong Wang ◽  
Jinxiang Wang ◽  
Nan Chen

This paper investigates the trajectory tracking control of independently actuated autonomous vehicles after the first impact, aiming to mitigate the secondary collision probability. An integrated predictive control strategy is proposed to mitigate the deteriorated state propagation and facilitate safety objective achievement in critical conditions after a collision. Three highlights can be concluded in this work: (1) A compensatory model predictive control (MPC) strategy is proposed to incorporate a feedforward-feedback compensation control (FCC) method. Based on the definite physical analysis, it is verified that adequate reverse steering and differential torque vectoring render more potentials and flexibility for vehicle post-impact control; (2) With compensatory portions, the deteriorated states after a collision are far beyond the traditional stability envelope. Hence it can be further manipulated in MPC by constraint transformation, rather than introducing soft constraints and decreasing the control efforts on tracking error; (3) Considering time-varying saturation on input, input rate, and slip ratio, the proposed FCC-MPC controller is developed to improve faster deviation attenuation both in lateral and yaw motions. Finally two high-fidelity simulation cases implemented on CarSim-Simulink conjoint platform have demonstrated that the proposed controller has the advanced capabilities of vehicle safety improvement and better control performance achievement after severe impacts.


Sign in / Sign up

Export Citation Format

Share Document