Synchrotron Radiation in Erhic Interaction Region

The FCC-ee machine induced backgrounds on the two proposed detectors (CLD and IDEA) have been studied in detail. Synchrotron Radiation (SR) considerations dictate the Interaction Region (IR) optimization. An asymmetric IR design limits the final bend critical energy to 100 keV. Masks placed before the final focus quadrupole protect the detector from direct hits, and a shield placed around the beam pipe from secondary particles, keeping the effect of SR on the detector to negligible levels. The most important source of background is expected to be the Incoherent Pair Creation (IPC). Its effect has been studied in full simulation and reconstruction, and it was shown that it will not pose a problem for the detector, even if conservative estimations for the time resolution of the detector sensors are assumed. Moreover, the [Formula: see text], radiative Bhabhas and beam-gas interaction induced backgrounds were studied. All were found to have small to negligible effect on the detector. Overall, the FCC–ee interaction region backgrounds are not expected to compromise the detector performance.

Download Full-text

Heat load in IR from synchrotron radiation and beam loss for CEPC double ring scheme

International Journal of Modern Physics A ◽

10.1142/s0217751x21420124 ◽

2021 ◽

pp. 2142012

Author(s):

Sha Bai ◽

Chenghui Yu ◽

Yiwei Wang ◽

Jie Gao

Keyword(s):

Synchrotron Radiation ◽

Temperature Rise ◽

Load Distribution ◽

Heat Load ◽

Superconducting Magnet ◽

Research Area ◽

Interaction Region ◽

Beam Loss ◽

Double Ring ◽

Electron Positron

With the discovery of the Higgs boson at around 125 GeV, a circular Higgs factory design with high luminosity [Formula: see text] is becoming more popular in the accelerator world. The CEPC project in China is one of them. Machine Detector Interface (MDI) is the key research area in electron–positron colliders, especially in CEPC, since the synchrotron radiation (SR) photons can contribute to the heat load of the beam pipe and radiation dose may damage the components. And the heat load can cause the temperature rise in some part, and if the temperature rise is too high, the beryllium pipe in the interaction region will melt and the superconducting magnet may quench. Thus, the heat load distribution from synchrotron radiation and beam loss in the interaction region are analyzed carefully and results are given in this paper.

Download Full-text

Direct Observation of Monolayer Zones in Al-wt 4% Cu

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100178823 ◽

1990 ◽

Vol 48 (1) ◽

pp. 14-15

Author(s):

B. Jouffrey ◽

D. Dorignac ◽

A. Bourret

Keyword(s):

Solid Solution ◽

Synchrotron Radiation ◽

Direct Observation ◽

Supersaturated Solid Solution ◽

Original Model ◽

X Ray ◽

Image Position

Since the early works on GP zones and the model independently proposed by Preston and Guinier on the first steps of precipitation in supersaturated solid solution of aluminium containing a few percent of copper, many works have been performed to understand the structure of different stages in the sequence of precipitation.The scheme which is generally admitted can be drawn from a work by Phillips.In their original model Guinier and Preston analysed a GP zone as composed of a single (100) copperrich plane surrounded by aluminum atomic planes with a slightly shorter distance from the original plane than in the solid solution.From X-ray measurements it has also been shown that GP1 zones were not only copper monolayer zones. They could be up to a few atomic planes thick. Different models were proposed by Guinier, Gerold, Toman. Using synchrotron radiation, proposals have been recently made.

Download Full-text