Improved design of IPMSM for sensorless drive with absolute rotor position estimation capability

Author(s):  
Yong-Cheol Kwon ◽  
Seung-Ki Sul ◽  
Noor Aamir Baloch ◽  
Sohji Murakami ◽  
Shinya Morimoto
Electronics ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 791
Author(s):  
Gwangmin Park ◽  
Gyeongil Kim ◽  
Bon-Gwan Gu

In the permanent magnet synchronous motor (PMSM) sensorless drive method, motor inductance is a decisive parameter for rotor position estimation. Due to core magnetic saturation, the motor current easily invokes inductance variation and degrades rotor position estimation accuracy. For a constant load torque, saturated inductance and inductance error in the sensorless drive method are constant. Inductance error results in constant rotor position estimation error and minor degradations, such as less optimal torque current, but no speed estimation error. For a periodic load torque, the inductance parameter error periodically fluctuates and, as a result, the position estimation error and speed error also periodically fluctuate. Periodic speed error makes speed regulation and load torque compensation especially difficult. This paper presents an inductance parameter estimator based on polynomial neural network (PNN) machine learning for PMSM sensorless drive with a period load torque compensator. By applying an inductance estimator, we also proposed a magnetic saturation compensation method to minimize periodic speed fluctuation. Simulation and experiments were conducted to validate the proposed method by confirming improved position and speed estimation accuracy and reduced system vibration against periodic load torque.


Author(s):  
Yong-Cheol Kwon ◽  
Seung-Ki Sul ◽  
Noor Aamir Baloch ◽  
Sohji Murakami ◽  
Shinya Morimoto

Energies ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1254
Author(s):  
Gianluca Brando ◽  
Adolfo Dannier ◽  
Ivan Spina

This paper focuses on the performance analysis of a sensorless control for a Doubly Fed Induction Generator (DFIG) in grid-connected operation for turbine-based wind generation systems. With reference to a conventional stator flux based Field Oriented Control (FOC), a full-order adaptive observer is implemented and a criterion to calculate the observer gain matrix is provided. The observer provides the estimated stator flux and an estimation of the rotor position is also obtained through the measurements of stator and rotor phase currents. Due to parameter inaccuracy, the rotor position estimation is affected by an error. As a novelty of the discussed approach, the rotor position estimation error is considered as an additional machine parameter, and an error tracking procedure is envisioned in order to track the DFIG rotor position with better accuracy. In particular, an adaptive law based on the Lyapunov theory is implemented for the tracking of the rotor position estimation error, and a current injection strategy is developed in order to ensure the necessary tracking sensitivity around zero rotor voltages. The roughly evaluated rotor position can be corrected by means of the tracked rotor position estimation error, so that the corrected rotor position is sent to the FOC for the necessary rotating coordinate transformation. An extensive experimental analysis is carried out on an 11 kW, 4 poles, 400 V/50 Hz induction machine testifying the quality of the sensorless control.


2007 ◽  
Author(s):  
P. Champa ◽  
P. Somsiri ◽  
P. Wipasuramonton ◽  
P. Nakmahachalasint

2011 ◽  
Vol 6 (6) ◽  
pp. 594-600
Author(s):  
Kanokvate Tungpimolrut ◽  
Prapon Jitkreeyarn ◽  
Seubsuang Kachapornkul ◽  
Pakasit Somsiri ◽  
Akira Chiba

Sign in / Sign up

Export Citation Format

Share Document