Meminductor is a nonlinear two-terminal element with storage energy and memory ability. To date, meminductor element is not available commercially as memristor and memcapacitor are. Therefore, it is of great significance to implement a meminductor emulator for breadboard experiment. In this paper, a flux-controlled floating/grounded meminductor emulator without a memristor is presented. It is built with commercially available off-the-shelf electronic devices. It consists of single operational transconductance amplifier (OTA), single multiplier, two second-generation current conveyors (CCIIs), single current-feedback operational amplifier (CFOA) and single operational amplifier. Using OTA device introduces an additional control parameter besides frequency and amplitude values of applied voltage to control the area of pinched hysteresis loop of meminductor. Mathematical model of proposed emulator circuit is given to describe the behavior of meminductor circuit. The breadboard experiment is performed using CA3080, AD844, AD633J and LM741 for OTA, CCII–CFOA, multiplier and operational amplifier, respectively. Simulation and experimental test results are given to verify the theoretical analyses. Frequency-dependent pinched hysteresis loop is maintained up to 5 kHz. The presented meminductor emulator tends to work as ordinary inductor for higher frequencies.
Low-Voltage CMOS Current Feedback Operational Amplifier and Its Application
