Error-based Active Disturbance Rejection Control for Pitch Control of Wind Turbine by Improved Coyote Optimization Algorithm

Author(s):  
Congzhi Huang ◽  
Jini Zhuang
2020 ◽  
Vol 44 (3) ◽  
pp. 461-470 ◽  
Author(s):  
Chao Ai ◽  
Chao Wu ◽  
Fan Zhao ◽  
Xiangdong Kong

Power point tracking (PPT) is one of the necessary functions of the wind turbine to optimize the use of wind energy. PPT is a condition that needs to be completed after the grid is connected, which can be achieved by tracking the optimal rotation speed of the output of the wind turbine and the optimum torque and power output of the hydraulic system. Based on a fixed displacement pump speed control, an optimal PPT strategy with the active disturbance rejection control (ADRC) method is proposed, and the control objective is to maximize the energy conversion of the system. This paper sets out to (i) establish a hydraulic wind turbine grid-connected affine nonlinear mathematical model, based on the ADRC method and a fixed displacement pump speed output control, (ii) design a nonlinear tracking differentiator and extended state observer and nonlinear state error feedback control law, and (iii) achieve optimal PPT under different wind speeds. Simulations were model by MATLAB/Simulink, where the system inputs signals of different wind speeds and analyses control system stability and robustness. Simulation results show that the input power was greater with a fixed displacement pump speed .


2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Hammadi Laghridat ◽  
Ahmed Essadki ◽  
Maha Annoukoubi ◽  
Tamou Nasser

A novel and robust active disturbance rejection control (ADRC) strategy for variable speed wind turbine systems using a doubly fed induction generator (DFIG) is presented in this paper. The DFIG is directly connected to the main utility grid by stator, and its rotor is connected through a back-to-back three phase power converter (AC/DC/AC). Due to the acoustic nature of wind and to ensure capturing maximum energy, a control strategy to extract the available maximum power from the wind turbine by using a maximum power point tracking (MPPT) algorithm is presented. Moreover, a pitch actuator system is used to control the blades’ pitch angle of the wind turbine in order to not exceed the wind turbine rated power value in case of strong wind speeds. Furthermore, the rotor-side converter is used to control the active and reactive powers generated by the DFIG. However, the grid-side converter is used to control the currents injected into the utility grid as well as to regulate the DC-link voltage. This paper aims to study and develop two control strategies for wind turbine system control: classical control by proportional integral (PI) and the proposed linear active disturbance rejection control (LADRC). The main purpose here is to compare and evaluate the dynamical performances and sensitivity of these controllers to the DFIG parameter variation. Therefore, a series of simulations were carried out in the MATLAB/Simulink environment, and the obtained results have shown the effectiveness of the proposed strategy in terms of efficiency, rapidity, and robustness to internal and external disturbances.


Sign in / Sign up

Export Citation Format

Share Document