Visual environment for designing sequence control program with AI planning

Author(s):  
Y. Namioka ◽  
H. Mizutani
Author(s):  
William F. Chambers ◽  
Arthur A. Chodos ◽  
Roland C. Hagan

TASK8 was designed as an electron microprobe control program with maximum flexibility and versatility, lending itself to a wide variety of applications. While using TASKS in the microprobe laboratory of the Los Alamos National Laboratory, we decided to incorporate the capability of using subroutines which perform specific end-member calculations for nearly any type of mineral phase that might be analyzed in the laboratory. This procedure minimizes the need for post-processing of the data to perform such calculations as element ratios or end-member or formula proportions. It also allows real time assessment of each data point.The use of unique “mineral codes” to specify the list of elements to be measured and the type of calculation to perform on the results was first used in the microprobe laboratory at the California Institute of Technology to optimize the analysis of mineral phases. This approach was used to create a series of subroutines in TASK8 which are called by a three letter code.


Author(s):  
Kenneth S. Vecchio ◽  
John A. Hunt

In-situ experiments conducted within a transmission electron microscope provide the operator a unique opportunity to directly observe microstructural phenomena, such as phase transformations and dislocation-precipitate interactions, “as they happen”. However, in-situ experiments usually require a tremendous amount of experimental preparation beforehand, as well as, during the actual experiment. In most cases the researcher must operate and control several pieces of equipment simultaneously. For example, in in-situ deformation experiments, the researcher may have to not only operate the TEM, but also control the straining holder and possibly some recording system such as a video tape machine. When it comes to in-situ fatigue deformation, the experiments became even more complicated with having to control numerous loading cycles while following the slow crack growth. In this paper we will describe a new method for conducting in-situ fatigue experiments using a camputer-controlled tensile straining holder.The tensile straining holder used with computer-control system was manufactured by Philips for the Philips 300 series microscopes. It was necessary to modify the specimen stage area of this holder to work in the Philips 400 series microscopes because the distance between the optic axis and holder airlock is different than in the Philips 300 series microscopes. However, the program and interfacing can easily be modified to work with any goniometer type straining holder which uses a penrmanent magnet motor.


1975 ◽  
Vol 39 (2) ◽  
pp. 102-105
Author(s):  
Pinkham ◽  
G Ori ◽  
SH Wei ◽  
CA Full ◽  
FM Parkins

2010 ◽  
Vol 44 (6) ◽  
pp. 16
Author(s):  
MARY ANN MOON

Author(s):  
Nicolas Poirel ◽  
Claire Sara Krakowski ◽  
Sabrina Sayah ◽  
Arlette Pineau ◽  
Olivier Houdé ◽  
...  

The visual environment consists of global structures (e.g., a forest) made up of local parts (e.g., trees). When compound stimuli are presented (e.g., large global letters composed of arrangements of small local letters), the global unattended information slows responses to local targets. Using a negative priming paradigm, we investigated whether inhibition is required to process hierarchical stimuli when information at the local level is in conflict with the one at the global level. The results show that when local and global information is in conflict, global information must be inhibited to process local information, but that the reverse is not true. This finding has potential direct implications for brain models of visual recognition, by suggesting that when local information is conflicting with global information, inhibitory control reduces feedback activity from global information (e.g., inhibits the forest) which allows the visual system to process local information (e.g., to focus attention on a particular tree).


1995 ◽  
Author(s):  
M. C. Willemsen ◽  
R. Genders ◽  
H. De Vries

Sign in / Sign up

Export Citation Format

Share Document