Vibrotactile display for hand-held input device providing spatial and directional information

Author(s):  
Gi-Hun Yang ◽  
Dongseok Ryu ◽  
Sungchul Kang
2012 ◽  
Vol 21 (2) ◽  
pp. 192-202 ◽  
Author(s):  
Gi-Hun Yang ◽  
Dongseok Ryu ◽  
Shinsuk Park ◽  
Sungchul Kang

This study proposes a novel handheld vibrotactile display (T-hive) to provide a human operator with spatial and directional information. The proposed design is composed of a spherical knob with a vibrotactile surface and a moving base that allows 6-DOF motion. To isolate vibrotactile stimuli provided by multiple actuators, the spherical knob is divided into 13 vibrotactile modules. Each vibrotactile module consists of a vibration motor, a patch of spherical surface, and a vibration isolator. By coordinating the vibrotactile modules, the vibrotactile display delivers spatial and directional information based on phantom sensation and sensory saltation. Through experiments, we evaluated the effectiveness of the spatial and directional information perceived on the palm and fingers of the operator's hand. The experimental results confirm that vibrotactile feedback is useful for object control by providing intuitive information.


2003 ◽  
Author(s):  
Anne C. McLaughlin ◽  
Wendy A. Rogers ◽  
Arthur D. Fisk

Author(s):  
C. Van der Geest

I am a 30-year-old sharemilker on my parent's 600 cow developing farm near Blackball on the western side of the Grey Valley. Earlier this year I competed in the National Young Farmer of the Year competition and finished a close third. So what is information? There are two types of information that I use. There is data gathered from my farm to help fine tune the running of the day to day operations on the farm And directional information This is the information that arrives in papers and directs the long-term direction and plans of the farm and farming businesses. Due to the variability in weather on the Coast there is a greater need to monitor and adjust the farming system compared to an area like Canterbury. This was shown last year (2001/02) when the farm was undergoing a rapid period of development and I was under time restraints from increasing the herd size, building a new shed as well as developing the farm. The results of the time pressure was that day to day information gathering was lower resulting in per cow production falling by 11% or around $182 per cow. So what information was lacking that caused this large drop in profit. • Pasture growth rates • Cow condition • Nitrogen requirements • Paddock performance • Milk production • Pre-mating heat detection As scientists and advisers I hear you say that it is the farmer's responsibility to gather and analyse this information. You have the bigger topics to research and discover, gene marking, improving pasture species, sexing of sperm and ideas that I have not even contemplated yet. This is indeed very valuable research. Where would farming be without the invention of electric fences, artificial breeding and nitrogen research? But my problem is to take a farm with below average production to the top 10% in production with the existing technology and farming principles. I have all the technical information I need at the end of a phone. I can and do ring my consultant, fertiliser rep, vet, neighbour and due to the size and openness of New Zealand science, at present if they do not know I can ring an expert in agronomy, nutrition, soils and receive the answer that I require. I hope that this openness remains as in a time of privatisation and cost cutting it is a true advantage. I feel that for myself the next leap in information is not in the growing of grass or production of milk but in the tools to collect, store and utilise that information. This being tied to a financial benefit to the farming business is the real reason that I farm. Think of the benefits of being able to read pasture cover on a motorbike instantly downloaded, overlaying cow intake with milk production, changes in cow weight, daily soil temperature and predicted nitrogen response. Telling me low producing cows and poor producing paddocks, any potential feed deficits or surpluses. This would be a powerful information tool to use. The majority of this information is already available but until the restraints of time and cost are removed from data gathering and storage, this will not happen.


2020 ◽  
Author(s):  
Roudati jannah

Perangkat keras komputer adalah bagian dari sistem komputer sebagai perangkat yang dapat diraba, dilihat secara fisik, dan bertindak untuk menjalankan instruksi dari perangkat lunak (software). Perangkat keras komputer juga disebut dengan hardware. Hardware berperan secara menyeluruh terhadap kinerja suatu sistem komputer. Prinsipnya sistem komputer selalu memiliki perangkat keras masukan (input/input device system) – perangkat keras premprosesan (processing/central processing unit) – perangkat keras luaran (output/output device system) – perangkat tambahan yang sifatnya opsional (peripheral) dan tempat penyimpanan data (storage device system/external memory).


2020 ◽  
Author(s):  
Sintia Paramita

Komputer adalah serangkaian mesin elektronik yang terdiri dari jutaan komponen yang dapat saling bekerja sama, serta membentuk sebuah sistem kerja yang rapi dan teliti.Pada hal ini, perangkat keras komputer atau yang biasa disebut dengan “ hardware’ merupakan komponen atau unsur penyusun dari komputer. Sifat hardware dapat dilihat, disentuh secara langsung, dan bentuknya nyata. Perangkat keras ini juga memiliki fungsi untuk mendukung untuk jalannya proses kerja komputer agar mencapai tujuan utama. Berdasarkan fungsinya, perangkat keras (hardware) dibedakan menjadi 5 sistem, yaitu: yaitu perangkat masukan (input device system), perangkat keras pemprosesan (central processing system), perangkat keras keluaran (output device system), perangkat keras tambahan (peripheral/ accessories device system) dan penyimpanan data (external memory). Seluruh sistem perangkat keras saling bekerja sama dan memiliki masing-masing fungsi yang berhubungan untuk memenuhi tujuan komputerisasi. Perangkat keras atau hardware bekerja sesuai dengan perintah yang ditentukan.


2020 ◽  
Author(s):  
TKarina Rafiela

Perangkat keras komputer (hardware) adalah salah satu komponen dari sebuah komputer yang sifat alatnya dapat dilihat dan disentuh secara langsung atau berbentuk nyata, yang berfungsi untuk mendukung proses komputerisasi. Berdasarkan fungsinya, perangkat keras komputer terbagi menjadi: input device (unit masukan), process device (unit pemrosesan), output device (unit keluaran), backing storage (unit penyimpanan), dan periferal (unit tambahan).


2020 ◽  
Author(s):  
Sasmita Rahmadani

Perangkat keras komputer atau yang biasa disebut dengan “ hardware’ merupakan komponen atau unsur penyusun dari komputer. Sifat hardware dapat dilihat, disentuh secara langsung, dan bentuknya nyata. Perangkat keras ini juga memiliki fungsi untuk mendukung untuk jalannya proses kerja komputer agar mencapai tujuan utama. Berdasarkan fungsinya,perangkat keras (hardware) dibedakan menjadi beberapa yaitu: perangkat masukan (input device system), perangkat keras pemprosesan (central processing system), perangkat keras keluaran (output device system) dan perangkat keras tambahan (peripheral/ accessories devicesystem). Seluruh sistem perangkat keras saling bekerja sama dan memiliki masing-masing fungsi yang berhubungan untuk memenuhi tujuan komputer. Perangkat keras atau hardware bekerja sesuai dengan perintah yang ditentukan.


2020 ◽  
Author(s):  
Sri Fatimah

Perangkat keras komputer atau yang biasa disebut dengan “ hardware’ merupakan komponen atau unsur penyusun dari komputer. Sifat hardware dapat dilihat, disentuh secara langsung, dan bentuknya nyata. Perangkat keras ini juga memiliki fungsi untuk mendukung untuk jalannya proses kerja komputer agar mencapai tujuan utama. Berdasarkan fungsinya, perangkat keras (hardware) dibedakan menjadi 5 sistem, yaitu: yaitu perangkat masukan (input device system), perangkat keras pemprosesan (central processing system), perangkat keras keluaran (output device system), perangkat keras tambahan (peripheral/ accessories device system) dan penyimpanan data (external memory). Seluruh sistem perangkat keras saling bekerja sama dan memiliki masing-masing fungsi yang berhubungan untuk memenuhi tujuan komputerisasi. Perangkat keras atau hardware bekerja sesuai dengan perintah yang ditentukan.


2020 ◽  
Author(s):  
Intan khadijah simatupang

Komputer adalah serangkaian mesin elektronik yang terdiri dari jutaan komponen yang dapat saling bekerja sama, serta membentuk sebuah sistem kerja yang rapi dan teliti. Sistem ini kemudian digunakan untuk dapat melaksanakan pekerjaan secara otomatis, berdasarkan instruksi (program) yang diberikan kepadanya. Istilah Hardware computer atau perangkat keras komputer, merupakan benda yang secara fisik dapat dipegang, dipindahkan dan dilihat. Software komputer atau perangkat lunak komputer merupakan kumpulan instruksi (program/prosedur) untuk dapat melaksanakan pekerjaan secara otomatis dengan cara mengolah atau memproses kumpulan instruksi (data) yang diberikan. Pada prinsipnya sistem komputer selalu memiliki perangkat keras masukan (input/input device system) – perangkat keras pemprosesan (processing/ central processing unit) – perangkat keras keluaran (output/output device system), perangkat tambahan yang sifatnya opsional (peripheral) dan tempat penyimpanan data (Storage device system/external memory).


Sign in / Sign up

Export Citation Format

Share Document