Comparison of Mechanical Properties of 3D‐Printed, CAD/CAM, and Conventional Denture Base Materials

2020 ◽  
Vol 29 (6) ◽  
pp. 524-528 ◽  
Author(s):  
Vladimir Prpić ◽  
Zdravko Schauperl ◽  
Amir Ćatić ◽  
Nikša Dulčić ◽  
Samir Čimić
Keyword(s):  
Mechanical Properties ◽  
Denture Base ◽  
Base Materials ◽  
Cad Cam ◽  
3D Printed

scholarly journals Aplicabilidade dos sistemas CAD/CAM em Prótese Total: revisão de literatura

2019 ◽  
Vol 7 (11) ◽  
Author(s):  
Caroline Costa Tavares ◽  
Julliana Cariry Palhano Freire ◽  
Stéphanie Cariry Palhano Freire ◽  
Eduardo Dias-Ribeiro ◽  
André Ulisses Dantas Batista
Keyword(s):  
Mechanical Properties ◽  
Complete Denture ◽  
Complete Dentures ◽  
Residual Monomer ◽  
Denture Base ◽  
Base Materials ◽  
Removable Denture ◽  
Computer Aided ◽  
Cad Cam ◽  
Dent Assoc

Introdução: A tecnologia CAD/CAM possui múltiplas aplicações protéticas, incluindo a prótese total. Objetivos: realizar uma revisão de literatura sobre a aplicabilidade dos sistemas CAD/CAM na fabricação de próteses totais, a fim de elucidar as propriedades das próteses confeccionadas através dessa tecnologia e as características desse sistema. Metodologia: A busca por artigos científicos que contemplassem o tema foi realizada através das bases de dados PUBMED e SCIELO, sem restrição de período. Foi feita a análise dos títulos e resumos e em seguida o acesso ao texto completo. Resultados: Dentre as características do sistema CAD/CAM, os estudos citaram menor necessidade de consultas e tempo clínico. É preciso conhecimento da tecnologia pelo cirurgião-dentista e o maior custo laboratorial é uma das desvantagens de sua utilização. Quanto às propriedades, observa-se a redução da rugosidade e porosidade, assim como da adesão de Candida albicans à base da prótese e teor de monômero residual. Maior dureza de superfície é verificada em comparação com as próteses totais convencionais. Conclusão: Menor número de consultas e tempo clínico são características do uso do sistema CAD/CAM em prótese total. Maior dureza da prótese e redução da rugosidade, porosidade, adesão de C. albicanse do teor de monômero residual são propriedades que as próteses totais apresentam quando confeccionadas por essa tecnologia.Descritores: Odontologia; Prótese Total; Projeto Auxiliado por Computador.ReferênciasAlbero A, Pacual A, Camps I, Grau-Benitez M. Comparative characterization of a novel cad-cam polymer-infiltrated-ceramic-network. J Clin Exp Dent. 2015;7(4):e495-500.Janeva N, Kovacevska G, Janev E. Complete Dentures Fabricated with CAD/CAM Technology and a Traditional Clinical Recording Method. Open Access Macedonian Journal of Medical Sciences. 2017;5(6):785-89.Baba NZ, Alrumaih HS, Goodacre BJ, Goodacre CJ.  Current   techniques  in  CAD/CAM  denture fabrication. Gen Dent. 2016;64(6):23-8.Alamari MR. The influence of polishing techniques on pre-polymerized CAD/CAM acrylic resin denture bases. Electronic Physician. 2017;9(10):5452-58.Steinmassl PA, Klaunzer F, Steinmassi O, Dumfahrt H, Grunert I. Evaluation of Currently Available CAD/CAM Denture Systems. Int J Prosthodont. 2017;30(2):116-22.de Mendonça AF, Furtado de Mendonça M, White GS, Sara G, Littlefair D. Total CAD/CAM Supported Method for Manufacturing Removable Complete Dentures. Case Reports in Dentistry. 2016;2016:1259581.Mclaughlin JB, Ramos VJr. Complete denture fabrication with CAD/CAM record bases. J Prosthet Dent. 2015;114(4):493-97.Schweiger J, Guth JF, Edelhoff D, Stumbaum J. Virtual evaluation for CAD-CAM-fabricated complete dentures. J Prosthet Dent. 2017;117(1):28-33.Liu PR, Essig ME. Panorama of dental CAD/CAM restorative systems. Compend Contin Educ Dent. 2008; 29:482, 4, 6-8 passim.Giordano R. Materials for chairside CAD/CAM-produced restorations. J Am Dent Assoc. 2006;137(Suppl):14S-21S.Bilgin MS, Baytaroglu EN, Erdem A, Dilber E. A review of computer-aided design/computer-aided manufacture techniques for removable denture fabrication. European Journal of Dentistry. 2016;10(2):286-91.Maeda Y, Minoura M, Tsutsumi S, Okada M, Nokubi T. A CAD/CAM system for removable denture. Part I: Fabrication of complete dentures. Int J Prosthodont. 1994;7:17–21.Di Giacomo GA, Cury PR, de Araujo NS, Sendyk WR, Sendyk CL. Clinical application of stereolithographic surgical guides for implant placement: Preliminary results. J Periodontol. 2005;76:503–7.Ucar Y, Akova T, Aysan I. Mechanical properties of polyamide versus different PMMA denture base materials. J Prosthodont. 2012;21(3):173–6.Lee HJ, Kim CW, Kim YS. The level of residual monomer in injection molded denture base materials. J Korean Acad Prosth. 2003;41(3):360–8.Kattadiyil MT, Goodacre CJ, Baba NZ. CAD/CAM complete dentures: a review of two commercial fabrication systems. J Calif Dent Assoc. 2013;41(6):407–16.Consani RLX, Pucciarelli MGR, Mesquita MF, Nogueira MC, Barao VA. Polymerisation cycles on hardness and surface gloss of denture base. Int J Contemp Dent Med Rev. 2014;2014:1–6.Nakayama M, Takagi N. Methods for manufacturing dental resin block. US:2016.Murakami N, Wakabayashi N, Matsushima R, Kishida A, Igarashi Y. Effect of high-pressure polymerization on mechanical properties of PMMA denture base resin. J Mech Behav Biomed Mater. 2013;20:98-104.Al-Fouzan AF, Al-Mejarad Lamya A, Albarrag AM. Adherence of Candida to complete denture surfaces in vitro: A comparison of conventional and CAD/CAM complete dentures. J Adv Prosthodont. 2017;9(5):402-8.Digholkar S, Madhav VN, Palaskar J. Evaluation of the flexural strength and microhardness of provisional crown and bridge materials fabricated by different methods. J Indian Prosthodont Soc. 2016;16(4):328-34.Ayman AD. The residual monomer content and mechanical properties of CAD\CAM resins used in the fabrication of complete dentures as compared to heat cured resins. Electron Physician. 2017;9(7):4766-72.

scholarly journals A Color Stability Comparison of Conventional and CAD/CAM Polymethyl Methacrylate Denture Base Materials

2019 ◽  
Vol 53 (2) ◽  
pp. 158-167 ◽  
Author(s):  
Cagatay Dayan ◽  
Melahat Celik Guven ◽  
Burc Gencel ◽  
Canan Bural
Keyword(s):  
Polymethyl Methacrylate ◽  
Color Stability ◽  
Denture Base ◽  
Base Materials ◽  
Cad Cam

scholarly journals Surface Characteristics of Milled and 3D Printed Denture Base Materials Following Polishing and Coating: An In-Vitro Study

Materials ◽  
2020 ◽  
Vol 13 (15) ◽  
pp. 3305
Author(s):  
Pablo Kraemer Fernandez ◽  
Alexey Unkovskiy ◽  
Viola Benkendorff ◽  
Andrea Klink ◽  
Sebastian Spintzyk
Keyword(s):  
Surface Roughness ◽  
3D Printing ◽  
In Vitro Study ◽  
Surface Characteristics ◽  
Denture Base ◽  
Liquid Resin ◽  
Base Materials ◽  
Superior Surface ◽  
3D Printed

(1) Background: To date, no information on the polishability of milled and 3D-printed complete denture bases has been provided, which is relevant in terms of plaque accumulation. (2) Methods: three groups (n = 30) were manufactured using the cold-polymerization polymethilmethacrilate, milling (SM) and 3D printing (AM). 10 specimens of each group were left untreated (reference). 10 more specimens were pre-polished (intermediate polishing) and 10 final specimens were highgloss polished. An additional 20 specimens were 3D printed and coated with the liquid resin (coated), 10 of which were additionally polished (coated + polished). For each group Ra and Rz values, gloss value and REM images were obtained. (3). The “highgloss-polished” specimens showed statistically lower Ra and Rz values in the SM, followed by AM and conventional groups. In the AM group statistically lower surfaces roughness was revealed for highgloss-polished, “coated + polished”, and “coated” specimens, respectively. (4) Conclusions: The milled specimens demonstrated superiors surface characteristics than 3D printed and conventionally produced after polishing. The polished specimens demonstrated superior surface characteristics over coated specimens. However, the surface roughness by both polished and coated specimens was within the clinically relevant threshold of 0.2 µm.

scholarly journals The Mechanical Properties of a Poly(methyl methacrylate) Denture Base Material Modified with Dimethyl Itaconate and Di-n-butyl Itaconate

2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
Pavle Spasojevic ◽  
Milorad Zrilic ◽  
Vesna Panic ◽  
Dragoslav Stamenkovic ◽  
Sanja Seslija ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Methyl Methacrylate ◽  
Surface Hardness ◽  
Base Material ◽  
Dynamic Mechanical Properties ◽  
Denture Base ◽  
Mean Values ◽  
Poly Methyl Methacrylate ◽  
Base Materials ◽  
Wide Range

This study investigates a wide range of clinically relevant mechanical properties of poly(methyl methacrylate) (PMMA) denture base materials modified with di-methyl itaconate (DMI) and di-n-butyl itaconate (DBI) in order to compare them to a commercial PMMA denture base material. The commercial denture base formulation was modified with DMI and DBI by replacing up to 10 wt% of methyl methacrylate (MMA) monomer. The specimens were prepared by standard bath curing process. The influence of the itaconate content on hardness, impact strength, tensile, and thermal and dynamic mechanical properties was investigated. It is found that the addition of di-n-alkyl itaconates gives homogenous blends that show decreased glass transition temperature, as well as decrease in storage modulus, ultimate tensile strength, and impact fracture resistance with increase in the itaconate content. The mean values of surface hardness show no significant change with the addition of itaconates. The magnitude of the measured values indicates that the poly(methyl methacrylate) (PMMA) denture base material modified with itaconates could be developed into a less toxic, more environmentally and patient friendly product than commercial pure PMMA denture base material.

Sign in / Sign up

Export Citation Format

Share Document