The Influence of the Recirculation Region: A Comparison of the Convective Heat Transfer Downstream of a Backward-Facing Step and Behind a Jet in a Crossflow

1991 ◽  
Vol 113 (1) ◽  
pp. 126-134 ◽  
Author(s):  
V. Scherer ◽  
S. Wittig
Keyword(s):  
Heat Transfer ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Flux Ratio ◽  
Separated Flows ◽  
Numerical Code ◽  
Recirculation Region ◽  
Backward Facing Step ◽  
Nusselt Numbers ◽  
Wide Range

Convective heat transfer is examined in two typical examples of separated flows, namely, the flow over a backward-facing step and a two-dimensional jet entering a crossflow. Local Nusselt numbers were determined in and behind the recirculation region. The main parameters influencing the heat transfer, the Reynolds number, and the momentum flux ratio of the jet and the crossflow have been varied over a wide range. In addition to heat transfer measurements, the flow field has been documented using an LDA system and oil film technique. The static pressure distribution at the wall within the separated flow is also given. The measurements are compared with the results of a numerical code, based on a finite volume method, where the well known k-ε model is employed. The differences in Nusselt numbers predicted with one- and two-layer models are shown to demonstrate the influence of wall functions on heat transfer. The numerical and experimental results are compared with available data, and the differences and similarities in the heat transfer behavior of separated flows are discussed.

scholarly journals The Influence of the Recirculation Region: A Comparison of the Convective Heat Transfer Downstream of a Backward-Facing Step and Behind a Jet in a Cross Flow

1989 ◽  
Author(s):  
V. Scherer ◽  
S. Wittig
Keyword(s):  
Heat Transfer ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Cross Flow ◽  
Separated Flows ◽  
Numerical Code ◽  
Recirculation Region ◽  
Backward Facing Step ◽  
Nusselt Numbers ◽  
Wide Range

Convective heat transfer is examined in two typical examples of separated flows, namely: the flow over a backward-facing step and a two-dimensional jet entering a cross flow. Local Nusselt numbers were determined in and behind the recirculation region. The main parameters influencing the heat transfer, the Reynolds number and the momentum flux ratio of the jet and the cross flow, have been varied in a wide range. In addition to heat transfer measurements, the flow field has been documented using a LDA-system and oil film techniques. The static pressure distribution at the wall within the separated flow is also given. The measurements are compared with the results of a numerical code, based on a finite volume method, where the well known k-ε-model is employed. The differences in Nusselt numbers predicted with a one- and a two-layer model are shown to demonstrate the influence of wall functions on heat transfer. The numerical and experimental results are compared with available data, and the differences and similarities in the heat transfer behaviour of separated flows are discussed.

Effects of Curvature and Convective Heat Transfer in Curved Square Duct Flows

2006 ◽  
Vol 128 (5) ◽  
pp. 1013-1022 ◽  
Author(s):  
R. N. Mondal ◽  
Y. Kaga ◽  
T. Hyakutake ◽  
S. Yanase
Keyword(s):  
Heat Transfer ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Outer Wall ◽  
Heated Wall ◽  
Dean Number ◽  
Square Duct ◽  
Nusselt Numbers ◽  
Wide Range ◽  
Steady Solutions

Non-isothermal flows with convective heat transfer through a curved duct of square cross section are numerically studied by using a spectral method, and covering a wide range of curvature, δ, 0<δ≤0.5 and the Dean number, Dn, 0≤Dn≤6000. A temperature difference is applied across the vertical sidewalls for the Grashof number Gr=100, where the outer wall is heated and the inner one cooled. Steady solutions are obtained by the Newton-Raphson iteration method and their linear stability is investigated. It is found that the stability characteristics drastically change due to an increase of curvature from δ = 0.23 to 0.24. When there is no stable steady solution, time evolution calculations as well as their spectral analyses show that the steady flow turns into chaos through periodic or multi-periodic flows if Dn is increased no matter what δ is. The transition to a periodic or chaotic state is retarded with an increase of δ. Nusselt numbers are calculated as an index of horizontal heat transfer and it is found that the convection due to the secondary flow, enhanced by the centrifugal force, increases heat transfer significantly from the heated wall to the fluid. If the flow becomes periodic and then chaotic, as Dn increases, the rate of heat transfer increases remarkably.

scholarly journals Heat Transfer Coefficients in Concentric Annuli

2002 ◽  
Vol 124 (6) ◽  
pp. 1200-1203 ◽  
Author(s):  
Jaco Dirker ◽  
Josua P. Meyer
Keyword(s):  
Heat Transfer ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Heat Transfer Correlation ◽  
Transfer Coefficients ◽  
Number Range ◽  
Heat Transfer Coefficients ◽  
Nusselt Numbers ◽  
Wide Range ◽  
Wilson Plot

The geometric shape of a passage’s cross-section has an effect on its convective heat transfer capabilities. For concentric annuli, the diameter ratio of the annular space plays an important role. The purpose of this investigation was to find a correlation that will accurately predict heat transfer coefficients at the inner wall of smooth concentric annuli for turbulent flow of water. Experiments were conducted with a wide range of annular diameter ratios and the Wilson plot method was used to develop a convective heat transfer correlation. The deduced correlation predicted Nusselt numbers accurately within 3 percent of measured values for annular diameter ratios between 1.7 and 3.2 and a Reynolds number range, based on the hydraulic diameter, of 4 000 to 30,000.

Simulation of electrically conductive liquid convection in a spherical layer when heat is applied to the inner sphere

2019 ◽  
Author(s):  
С.В. Соловьев
Keyword(s):  
Heat Transfer ◽  
Heat Exchange ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Magnetic Induction ◽  
Spherical Layer ◽  
Gravity Vector ◽  
Joule Dissipation ◽  
Conductive Liquid ◽  
Nusselt Numbers

Представлены результаты численного моделирования конвективного теплообмена электропроводящей жидкости между концентрическими сферами при подводе тепла к внутренней сфере. Исследовано влияние числа Грасгофа и джоулевой диссипации на структуру течения жидкости, поля температуры, магнитной индукции и распределение локальных чисел Нуссельта. Получено уравнение подобия теплообмена, когда ускорение свободного падения направлено к центру сферического слоя. The Boussinesq approximation is used for modelling a large class of problems of convective heat transfer in spherical concentric layers in which the gravity vector is directed vertically downwards. But for problems of geophysics and astrophysics there is a fundamental difference, the gravity vector is directed along the radius to the center of the spherical layer. Therefore, the study of convective heat transfer in spherical layers, when the vector of gravitational acceleration is directed along the radius to the center of the spherical layer, is of independent interest. In this paper, the influence of the Grashof number, the Joule dissipation heat on the fluid flow structure, temperature field, magnetic induction, and the distribution of Nusselt numbers when heat is applied from below are studied. To solve the problem, the finite element method is used. In a dimensionless formulation, the problem is solved taking into account both the heat of the Joule dissipation, magnetic, inertial, viscous and lifting forces in a spherical coordinate system and the symmetry in longitude. The stationary fields of temperature, stream functions, vortex strength, radial and meridional components of magnetic induction and the distribution of local Nusselt numbers of electro conductive liquid in a concentric spherical layer for different Grashof numbers with and without accounting for the heat of Joule dissipation are obtained when heat is applied to the inner sphere. Two critical values of the Grashof number are numerically determined. The equation of heat exchange similarity is obtained, when the acceleration of gravity is directed to the center of the spherical layer. The mathematical model and the presented results may be useful for the study of convective heat exchange of electrically conducting fluid in space technologies and in the geophysical and astrophysical problems.

Development and validation of an incompressible Navier-Stokes solver including convective heat transfer

2015 ◽  
Vol 25 (4) ◽  
pp. 861-886 ◽  
Author(s):  
Konstantinos Stokos ◽  
Socrates Vrahliotis ◽  
Theodora Pappou ◽  
Sokrates Tsangaris
Keyword(s):  
Heat Transfer ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Laminar Flows ◽  
Navier Stokes ◽  
Content Type ◽  
Strongly Coupled ◽  
Loosely Coupled ◽  
Wide Range ◽  
Coupled Solution

Purpose – The purpose of this paper is to present a numerical method for the simulation of steady and unsteady incompressible laminar flows, including convective heat transfer. Design/methodology/approach – A node centered, finite volume discretization technique is applied on hybrid meshes. The developed solver, is based on the artificial compressibility approach. Findings – A sufficient number of representative test cases have been examined for the validation of this numerical solver. A wide range of the various dimensionless parameters were applied for different working fluids, in order to estimate the general applicability of our solver. The obtained results agree well with those published by other researchers. The strongly coupled solution of the governing equations showed superiority compared to the loosely coupled solution as inviscid effects increase. Practical implications – Convective heat transfer is dominant in a wide variety of practical engineering problems, such as cooling of electronic chips, design of heat exchangers and fire simulation and suspension in tunnels. Originality/value – A comparison between the strongly coupled solution and the loosely coupled solution of the Navier-Stokes and energy equations is presented. A robust upwind scheme based on Roe’s approximate Riemann solver is proposed.

Study on Forced Convective Heat Transfer of FC-72 in Vertical Small Tubes

2019 ◽  
Author(s):  
Yantao Li ◽  
Yulong Ji ◽  
Katsuya Fukuda ◽  
Qiusheng Liu ◽  
Hongbin Ma
Keyword(s):  
Heat Transfer ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Convection Heat Transfer ◽  
Inlet Temperature ◽  
Experiment Data ◽  
Forced Convective Heat Transfer ◽  
Nusselt Numbers ◽  
Mini Channels ◽  
Heat Transfer Correlations

Abstract In this paper, the forced convective heat transfer of FC-72 was experimentally investigated for various of parameters like velocity, inlet temperature, tube size, and exponential period of heat generation rate. Circular tubes with different inner diameters (1, 1.8 and 2.8 mm) and heated lengths (30–50 mm) were used in this study. The experiment data suggest that the single-phase heat transfer coefficient increases with increasing flow velocity as well as decreasing tube diameter and ratio of heated length to inner diameter. The experiment data were nondimensionalized to study the effect of Reynolds number (Red) on forced convection heat transfer. The results indicate that the relation between Nusselt numbers (Nud) and Red for d = 2.8 mm show the same trend as the conventional correlations. However, the Nud for d = 1 and 1. 8 mm depend on Red in a different manner. The conventional heat transfer correlations are not adequate for prediction of forced convective heat transfer in mini channels. The heat transfer correlations for FC-72 in vertical small tubes with diameters of 1, 1.8 and 2.8 mm were developed separately based on the experiment data. The differences between experimental and predicted Nud are within ±15%.

Effects of Creep Flow and Viscous Dissipation in the Slip Regime for Isoflux Rectangular Microchannels

2007 ◽  
Author(s):  
Jennifer van Rij ◽  
Tim Ameel ◽  
Todd Harman
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Pressure Drop ◽  
Convective Heat Transfer ◽  
Viscous Dissipation ◽  
Convective Heat ◽  
Numerical Algorithm ◽  
Slip Flow ◽  
Creep Flow ◽  
Nusselt Numbers

The effects of rarefaction on convective heat transfer and pressure drop characteristics are numerically evaluated for uniform wall heat flux rectangular microchannels. Results are obtained by numerically solving the momentum and energy equations with both first- and second-order slip velocity and temperature jump boundary conditions. The resulting velocity and temperature fields are then evaluated to obtain the microchannel Poiseuille and Nusselt numbers. In addition to the effects of rarefaction, the effects of aspect ratio, thermal creep flow, and viscous dissipation are investigated for locally fully developed Poiseuille and Nusselt numbers. The constant wall heat flux results obtained in this study are compared to constant wall temperature results obtained previously, using the same numerical algorithm, at various aspect ratios including the limiting case of parallel plate microchannels. In addition to supplying previously unreported data on slip flow convective heat transfer and pressure drop characteristics, these results verify the numerical algorithm for more complex future slip flow analyses.

Convective Heat Transfer From a Sphere Due to Acoustic Streaming

1993 ◽  
Vol 115 (2) ◽  
pp. 332-341 ◽  
Author(s):  
A. Gopinath ◽  
A. F. Mills
Keyword(s):  
Heat Transfer ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Acoustic Streaming ◽  
Reynolds Numbers ◽  
Materials Processing ◽  
Acoustic Levitation ◽  
Simple Experiment ◽  
Wide Range ◽  
Prandtl Numbers

Convective heat transfer from a sphere due to acoustic streaming is examined for large streaming Reynolds numbers. Analytical and numerical solution techniques are used to obtain Nusselt number correlations for a wide range of Prandtl numbers with particular emphasis on the case of Pr~1. A simple experiment performed to confirm some of the predictions is described. The results obtained can be used for the thermal analysis of containerless materials processing in space using acoustic levitation.

Sign in / Sign up

Export Citation Format

Share Document