Design and Geometry of Face-Gear Drives

1992 ◽  
Vol 114 (4) ◽  
pp. 642-647 ◽  
Author(s):  
F. L. Litvin ◽  
Y. Zhang ◽  
J.-C. Wang ◽  
R. B. Bossler ◽  
Y.-J. D. Chen
Keyword(s):  
Face Gear ◽  
Analytical Geometry ◽  
Numerical Examples ◽  
Transmission Errors ◽  
Bearing Contact ◽  
Computerized Simulation ◽  
Gear Drives

The authors have developed the analytical geometry of face-gear drives, proposed the method for localization of bearing contact, developed computerized simulation of meshing and bearing contact, investigated the influence of gear misalignment on the shift of bearing contact and transmission errors. Application for design is discussed. The obtained results are illustrated with numerical examples.

Computerized Design, Generation and Simulation of Meshing and Contact of Modified Flender Worm-Gear Drives

1996 ◽  
Author(s):  
I. H. Seol ◽  
Faydor L. Litvin
Keyword(s):  
Gear Tooth ◽  
Worm Gear ◽  
Numerical Examples ◽  
Transmission Errors ◽  
Gear Drive ◽  
Bearing Contact ◽  
Tooth Surfaces ◽  
Design Generation ◽  
Computerized Simulation ◽  
Gear Drives

Abstract The worm and worm-gear tooth surfaces of existing design of Flender gear drive are in line contact at every instant and the gear drive is very sensitive to misalignment. Errors of alignment cause the shift of the bearing contact and transmission errors. The authors propose : (1) Methods for computerized simulation of meshing and contact of misaligned worm-gear drives of existing design (2) Methods of modification of geometry of worm-gear drives that enable to localize and stabilize the bearing contact and reduce the sensitivity of drives to misalignment (3) Methods for computerized simulation of meshing and contact of worm-gear drives with modified geometry The proposed approach was applied as well for the involute (David Brown) and Klingelnberg type of worm-gear drives. Numerical examples that illustrate the developed theory are provided.

Computerized Simulation of Meshing and Bearing Contact for Single-Enveloping Worm-Gear Drives

1992 ◽  
Vol 114 (2) ◽  
pp. 313-316 ◽  
Author(s):  
F. L. Litvin ◽  
V. Kin
Keyword(s):  
Point Contact ◽  
Worm Gear ◽  
Real Point ◽  
Line Contact ◽  
Numerical Examples ◽  
Transmission Errors ◽  
Bearing Contact ◽  
Ideal Line ◽  
Computerized Simulation ◽  
Gear Drives

Single-enveloping worm-gear drives are considered. A general approach to computerized simulation of meshing for such misaligned drives is proposed. The proposed algorithm makes it possible to determine the transfer point where ideal line contact turns into real point contact and the transmission errors and the shift of bearing contact caused by the misalignment. Numerical examples for involute worm-gear drives are presented.

Computerized Design, Generation and Simulation of Meshing and Contact of Modified Involute, Klingelnberg and Flender Type Worm-Gear Drives

1996 ◽  
Vol 118 (4) ◽  
pp. 551-555 ◽  
Author(s):  
I. H. Seol ◽  
F. L. Litvin
Keyword(s):  
Gear Tooth ◽  
Worm Gear ◽  
Numerical Examples ◽  
Transmission Errors ◽  
Gear Drive ◽  
Bearing Contact ◽  
Tooth Surfaces ◽  
Design Generation ◽  
Computerized Simulation ◽  
Gear Drives

The worm and worm-gear tooth surfaces of existing worm-gear drive designs are in line contact at every instant and the gear drive is very sensitive to misalignment. Errors of alignment cause shifting of the bearing contact and transmission errors. Methods for computerized simulation of meshing and contact of misaligned worm-gear drives of existing design are proposed. Also, modification of worm-gear drive geometry that provides a localized and stable bearing contact with reduced sensitivity to misalignment is described. Methods for computerized simulation of meshing and contact of worm-gear drives with the existing and modified geometry are represented. Numerical examples that illustrate the developed theory are provided. The proposed approach has been applied for modification of involute, Klingelnberg and Flender type worm-gear drives.

Computerized Design and Generation of Worm Gear Drives with Stable Bearing Contact and Low Transmission Errors

1999 ◽  
Vol 121 (4) ◽  
pp. 573-578 ◽  
Author(s):  
M. De Donno ◽  
F. L. Litvin
Keyword(s):  
Low Noise ◽  
Worm Gear ◽  
Force Transmission ◽  
New Approach ◽  
Transmission Errors ◽  
Gear Drive ◽  
Bearing Contact ◽  
Computerized Simulation ◽  
Gear Drives ◽  
Favorable Conditions

The authors propose a new approach for design and generation of low-noise, stable bearing contact gear drive with cylindrical worm. The approach is based on application of an oversized hob and varied plunging of worm generating tool. It is discovered that without plunging positive transmission errors occur (that are unacceptable for favorable conditions of force transmission). A predesigned parabolic function is provided that is able to absorb transmission errors caused by misalignment and reduce the level of vibrations, especially in the case of application of multi-thread worms. The developed approach is tested by computerized simulation of meshing and contact by the developed computer program. The investigation is accomplished for a worm-gear drive with the Klingelnberg type of the worm that is ground by a circular cone, but the proposed approach may be applied for other types of worm gear drives with cylindrical worms.

Kinematic and Geometric Models of Gear Drives

1996 ◽  
Vol 118 (4) ◽  
pp. 544-550 ◽  
Author(s):  
F. L. Litvin ◽  
I. H. Seol ◽  
D. Kim ◽  
J. Lu ◽  
A. G. Wang ◽  
...  
Keyword(s):  
Gear Tooth ◽  
Helical Gears ◽  
Transmission Errors ◽  
Bevel Gears ◽  
Bearing Contact ◽  
Tooth Surfaces ◽  
Involute Gears ◽  
Computerized Simulation ◽  
Gear Drives ◽  
The Impact

A methodology is proposed for the modification of gear tooth surfaces that reduces the impact of gear drive misalignment, the shift of the bearing contact (accompanied in some cases with edge contact), and the occurrence of discontinuous functions of transmission errors. The proposed approach is tested by computerized simulation of meshing and contact for unloaded and loaded gear drives. Applications of geometry modifications to the design of spur and helical involute gears, double-circular helical gears, face-gear drives, face-milled spiral bevel gears with constant tooth height and worm-gear drives are represented.

Compensating analysis of a double circular-arc helical gear by computerized simulation of meshing

2001 ◽  
Vol 215 (7) ◽  
pp. 759-771 ◽  
Author(s):  
C-K Chen ◽  
C-Y Wang
Keyword(s):  
Mathematical Model ◽  
Helical Gear ◽  
Tooth Contact Analysis ◽  
Angular Misalignment ◽  
Circular Arc ◽  
Numerical Examples ◽  
Transmission Errors ◽  
Bearing Contact ◽  
Tooth Surfaces ◽  
Computerized Simulation

A mathematical model of a stepped double circular-arc helical tooth profile with two centre offsets is developed. The conditions of gear meshing that reflect manufacturing and assembly errors are simulated. The locations of bearing contact and the contact path pattern of mating tooth surfaces are determined by tooth contact analysis (TCA). By applying the proposed mathematical model and TCA, single error impact can be determined. To compensate for offset and angular misalignment, the authors propose an adjustable bearing whereby transmission errors can be minimized. The investigation is illustrated with several numerical examples.

Computerized Design, Generation and Simulation of Meshing of Modified Involute Spur Gears With Localized Bearing Contact and Reduced Level of Transmission Errors

1997 ◽  
Vol 119 (1) ◽  
pp. 96-100 ◽  
Author(s):  
F. L. Litvin ◽  
D. H. Kim
Keyword(s):  
Computer Programs ◽  
Spur Gears ◽  
Numerical Examples ◽  
Transmission Errors ◽  
Bearing Contact ◽  
Design Generation

The authors propose modification of geometry of spur gears that enable to localize the bearing contact and reduce the level of transmission errors. Methods for generation of spur gears with the modified geometry are proposed as well. Computer programs for simulation of meshing and contact of misaligned spur gears with the modified geometry have been developed. The developed theory is illustrated with numerical examples.

Computerized Simulation of Transmission Errors and Shift of Bearing Contact for Hypoid Gear Drive With Conjugate Gear Tooth Surfaces

1994 ◽  
Author(s):  
Faydor L. Litvin ◽  
Jui-Sheng Chen ◽  
Thomas M. Sep ◽  
Jyh-Chiang Wang
Keyword(s):  
Gear Tooth ◽  
Low Noise ◽  
Linear Functions ◽  
Hypoid Gear ◽  
Transmission Errors ◽  
Gear Drive ◽  
Bearing Contact ◽  
Parabolic Function ◽  
Tooth Surfaces ◽  
Computerized Simulation

Abstract Computerized investigation of the influence of alignment errors on the transmission errors and the shift of the bearing contact is proposed. The investigation is performed for an imaginary hypoid gear drive with conjugate tooth surfaces. It is proven that the transmission functions caused by misalignment are periodic discontinues almost linear functions with the frequency of cycle of meshing. The above functions can be totally absorbed by a predesigned parabolic function. The shift of the bearing contact caused by misalignment has been determined as well. The performed investigation is based on computerized simulation of meshing and contact of gear tooth surfaces. The machine-tool settings for the generation of the designed gear drive have been determined. Numerical example that illustrates the developed theory is given. The performed investigation allows to determine the influence of gear misalignment on transmission errors, and design a low-noise hypoid gear drive by a properly predesigned parabolic function of transmission errors.

The Design, Generation, and Simulation of Meshing of Worm-Gear Drive With Longitudinally Localized Contacts

2000 ◽  
Vol 122 (2) ◽  
pp. 201-206 ◽  
Author(s):  
I. H. Seol
Keyword(s):  
Computer Program ◽  
Longitudinal Direction ◽  
Worm Gear ◽  
Contact Ratio ◽  
Transmission Errors ◽  
Gear Drive ◽  
Bearing Contact ◽  
Design Generation ◽  
Gear Drives

The design and simulation of meshing of a single enveloping worm-gear drive with a localized bearing contact is considered. The bearing contact has a longitudinal direction and two branches of contact path. The purpose of localization is to reduce the sensitivity of the worm-gear drive to misalignment. The author’s approach for localization of bearing contact is based on the proper mismatch of the surfaces of the hob and drive worm. The developed computer program allows the investigation of the influence of misalignment on the shift of the bearing contact and the determination of the transmission errors and the contact ratio. The developed approach has been applied for K type of single-enveloping worm-gear drives and the developed theory is illustrated with a numerical example. [S1050-0472(00)00502-X]

Computerized Design, Generation and Simulation of Meshing of a Spiroid Worm-Gear Drive With Double-Crowned Worm

1998 ◽  
Author(s):  
Mauro De Donno ◽  
Faydor L. Litvin
Keyword(s):  
Worm Gear ◽  
Face Gear ◽  
Transmission Errors ◽  
Gear Drive ◽  
Thread Surface ◽  
Bearing Contact ◽  
Parabolic Function ◽  
Design Generation ◽  
Cone Surface ◽  
Spiroid Worm

Abstract The authors propose methods of computerized design and analysis of a spiroid worm-gear drive with ground worm based on the following considerations: (1) The theoretical thread surface of the hob is generated by a cone surface. (2) The worm surface is crowned in profile and longitudinal directions in comparison with the hob thread surface. (3) The double crowning of the worm enables to localize the bearing contact and obtain a predesigned parabolic function of transmission errors of an assigned level. Computerized design of the worm-gear drive enables to discover and avoid singularities of the generated worm face-gear surface and pointing of teeth. The meshing and contact of the double-crowned worm and the worm face-gear is simulated to determine the influence of misalignment on the shift of bearing contact and transmission errors. Computer program for numerical solution is developed and applied. A numerical example that illustrates the developed theory is provided.

Sign in / Sign up

Export Citation Format

Share Document