An Experimental Study of Natural Convection Heat Transfer in Concentric and Eccentric Horizontal Cylindrical Annuli

1978 ◽  
Vol 100 (4) ◽  
pp. 635-640 ◽  
Author(s):  
T. H. Kuehn ◽  
R. J. Goldstein
Keyword(s):  
Heat Transfer ◽  
Experimental Study ◽  
Natural Convection ◽  
Convection Heat Transfer ◽  
Local Heat Transfer ◽  
Local Heat ◽  
Natural Convection Heat Transfer ◽  
Convection Heat ◽  
Transfer Coefficients ◽  
Laminar Convection

An experimental study has been conducted to determine the influence of eccentricity and Rayleigh number on natural convection heat transfer through a fluid bounded by two horizontal isothermal cylinders. Eccentricity of the inner cylinder substantially alters the local heat transfer on both cylinders, but the overall heat transfer coefficients change by less than 10 percent over the range of eccentricities investigated. Heat transfer results using the concentric geometry are given for Rayleigh numbers from 2.2 × 102 to 7.7 × 107 which includes regions of conduction, laminar convection, and partially turbulent convection.

Natural Convection Heat Transfer From a Staggered Vertical Plate Array

1993 ◽  
Vol 115 (4) ◽  
pp. 938-945 ◽  
Author(s):  
G. Tanda
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Vertical Plate ◽  
Convection Heat Transfer ◽  
Local Heat Transfer ◽  
Local Heat ◽  
Natural Convection Heat Transfer ◽  
Convection Heat ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients

An experimental study was performed to evaluate the natural convection heat transfer characteristics of an array of four staggered vertical plates. The thermal input at each plate was the same or differed from plate to plate depending on various heating modes. The effects of the interplate spacing and the plate-to-ambient temperature difference were investigated. The experiments were performed in air. Convective interactions among the plates were identified by examining the per-plate heat transfer coefficients and the local heat transfer coefficients along the vertical sides of plates. Local heat transfer results were obtained by means of the schlieren quantitative technique. Comparison of local heat transfer coefficients along the plate assembly with those of a continuous vertical plate (having the same height) showed enhancements up to a factor of two. Comparison of average heat transfer results with those for a parallel plate channel having the same exchanger size showed only little reductions in heat transfer rate, despite a 28 percent reduction in heat transfer area, with enhancements, in terms of specific heat flux, up to 30 percent.

Experimental Investigation of Natural Convection Heat Transfer in Volumetrically Heated Spherical Segments

1996 ◽  
Vol 118 (1) ◽  
pp. 31-37 ◽  
Author(s):  
F. J. Asfia ◽  
B. Frantz ◽  
V. K. Dhir
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Convection Heat Transfer ◽  
Reactor Vessel ◽  
Core Material ◽  
Natural Convection Heat Transfer ◽  
Convection Heat ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients ◽  
External Cooling

External cooling of a light water reactor vessel by flooding of the concrete cavity with subcooled water is one of several management strategies currently being considered for accidents in which significant relocation of core material is predicted to occur. At present, uncertainty exists with respect to natural convection heat transfer coefficients between the pool of molten core material and the reactor vessel wall. In the present work, experiments were conducted to examine natural convection heat transfer in internally heated partially filled spherical pools with external cooling. In the experiments, Freon-113 was contained in a Pyrex bell jar, which was cooled externally with subcooled water. The pool was heated using a 750 W magnetron taken from a conventional microwave. The pool had a nearly adiabatic free surface. The vessel wall temperature was not uniform and varied from the stagnation point to the free surface. A series of chromel–alumel thermocouples was used to measure temperatures in both steady-state and transient conditions. Each thermocouple was placed in a specific vertical and radial location in order to determine the temperature distribution throughout the pool and along the inner and outer walls of the vessel. In the experiments, pool depth and radius were varied parametrically. Both local and averages heat transfer coefficients based on pool maximum temperature were obtained. Rayleigh numbers based on pool height were varied from 2 × 1010 to 1.1 × 1014. Correlations for the local heat transfer coefficient dependence on pool angle and for the dependence of average Nusselt number on Rayleigh number and pool depth have been developed.

Sign in / Sign up

Export Citation Format

Share Document