Modeling and Experimental Verification of Electromagnetic Energy Harvesting From Plate Structures
The focus of the present work is on the design of plate structures for vibration energy harvesting from two closely-spaced modes of vibration. The work is motivated by the quest to design resonators that respond to variable-frequency sources of base motion. The geometry of two-dimensional structures, such as trapezoidal and V-shaped plates, is explored to obtain two closely-spaced harvestable vibration modes to scavenge energy across a broader bandwidth. To this end, an electromagnetic energy harvester in the form of a base excited plate is proposed. The plate carries tip magnets that oscillate past stationary coils to generate power from the first two modes of vibration. The plate dynamic behavior is governed by its geometry and placement of the magnets on its tip. An effort is made to optimize the system configuration so as to control the spacing between the resonance frequencies while efficiently harvesting energy from both modes. Findings of the present work are verified both numerically and experimentally.