Analysis of Free and Forced Ship Vibrations Using Finite Element Method

2010 ◽  
Author(s):  
Adil Yucel ◽  
Alaeddin Arpaci
Keyword(s):  
Finite Element ◽  
Forced Vibration ◽  
Vibration Analysis ◽  
Free Vibration Analysis ◽  
Ship Hull ◽  
Mode Shapes ◽  
Ship Structures ◽  
Hull Structure ◽  
Forced Vibration Analysis ◽  
Ship Vibration

With the increase of ship size and speed, shipboard vibration becomes a great concern in the design and construction of the vessels. Excessive ship vibration is to be avoided for passenger comfort and crew habitability. In addition to undesired effects on humans, excessive ship vibration may result in the fatigue failure of local structural members or malfunction of machinery and equipment. The propeller induces fluctuating pressures on the surface of the hull, which induce vibration in the hull structure. These pressure pulses acting on the ship hull surface above the propeller as the predominant factor for vibrations of ship structures are taken as excitation forces for forced vibration analysis. Ship structures are complex and may be analyzed after idealization of the structure. Several simplifying assumptions are made in the finite element idealization of the hull structure. In this study, a three-dimensional finite element model representing the entire ship hull, including the deckhouse and machinery propulsion system, has been developed using a solid modeling software for local and global vibration analyses. Vibration analysis has been studied under two conditions which are free-free (dry) and in-water (wet). Wet analysis has been implemented using acoustic elements. The total damping associated with overall ship hull structure vibration has been considered as a combination of the several damping components. As the result of global ship free vibration analysis, global natural frequencies and mode shapes have been determined. Besides, responses of local ship structures have been determined as the result of propeller induced forced vibration analysis.

scholarly journals Finite Element Vibration Analysis of Laminated Composite Folded Plate Structures

1999 ◽  
Vol 6 (5-6) ◽  
pp. 273-283 ◽  
Author(s):  
A. Guha Niyogi ◽  
M.K. Laha ◽  
P.K. Sinha
Keyword(s):  
Finite Element ◽  
Forced Vibration ◽  
Vibration Analysis ◽  
Degrees Of Freedom ◽  
Laminated Composite ◽  
Mode Shapes ◽  
Plate Structures ◽  
Drilling Degree Of Freedom ◽  
Vibration Responses ◽  
Forced Vibration Analysis

A nine-noded Lagrangian plate bending finite element that incorporates first-order transverse shear deformation and rotary inertia is used to predict the free and forced vibration response of laminated composite folded plate structures. A 6 × 6 transformation matrix is derived to transform the system element matrices before assembly. The usual five degrees-of-freedom per node is appended with an additional drilling degree of freedom in order to fit the transformation. The present finite element results show good agreement with the available semi-analytical solutions and finite element results. Parametric studies are conducted for free and forced vibration analysis for laminated folded plates, with reference to crank angle, fibre angle and stacking sequence. The natural frequencies and mode shapes, and forced vibration responses furnished here may serve as a benchmark for future investigations.

Multistage Coupling of Eight Bladed Discs on a Solid Shaft

2010 ◽  
Author(s):  
Romuald Rza˛dkowski ◽  
Marcin Drewczynski
Keyword(s):  
Finite Element ◽  
Forced Vibration ◽  
Vibration Analysis ◽  
Natural Frequencies ◽  
Free Vibrations ◽  
Rotor Blades ◽  
Mode Shapes ◽  
Centrifugal Stiffening ◽  
Shaft Deflection ◽  
Forced Vibration Analysis

Considered here is the effect of multistage coupling on the dynamics of a rotor consisting of eight bladed discs on a solid shaft. Each bladed disc had a different number of rotor blades. Free vibrations were examined using finite element representations of rotating single blades, bladed discs, and the entire rotor. In this study, the global rotating mode shapes of flexible tuned bladed discs-shaft assemblies were calculated, taking into account rotational effects, such as centrifugal stiffening. The thus obtained natural frequencies of the blade, the shaft, the bladed disc, and the entire shaft with discs were carefully examined to discover resonance conditions and coupling effects. This study found that the flexible modes of the tuned bladed discs affected by shaft motion were those with zero, one and two nodal diameters. In these modes shaft deflection was clearly visible. In forced vibration analysis a different EO excitation was applied for each stage. The importance of using models with different numbers of blades on each disc is apparent when compared with earlier results concerning discs with identical numbers of blades. Here the model of 8 discs with an equal number of blades on each disc is referred to as (Model 1), and the model of 8 discs with a different number of blades on each disc is referred to as (Model 2).

scholarly journals On the Dynamic Analysis of a Beam Carrying Multiple Mass-Spring-Mass-Damper System

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
O. Barry ◽  
D. C. D. Oguamanam ◽  
J. W. Zu
Keyword(s):  
Forced Vibration ◽  
Vibration Analysis ◽  
Natural Frequencies ◽  
Free Vibration Analysis ◽  
Mode Shapes ◽  
Approximate Methods ◽  
Orthogonality Relations ◽  
Mass Damper ◽  
Forced Vibration Analysis ◽  
Mass Spring

The exact natural frequencies, mode shapes, and the corresponding orthogonality relations are important in forced vibration analysis via modal expansion. In the present paper, a free vibration analysis is conducted to determine the exact natural frequencies and mode shapes of an axially loaded beam carrying several absorbers. An explicit expression is presented for the generalized orthogonality relations. These generalized orthogonality conditions are employed along with the assumed modes method to perform forced vibration analysis. The present approach is compared to other approximate methods in the literature with the classical orthogonality relations and different choice of mode shapes. The results indicate that the use of the generalized orthogonality relation with the exact mode shapes is required for a precise investigation of the dynamic response of a beam with mass-spring-mass-damper system.

Forced Vibration of Several Bladed Discs on the Shaft

2006 ◽  
Author(s):  
Romuald Rza¸dkowski ◽  
Marcin Drewczynski
Keyword(s):  
Finite Element ◽  
Forced Vibration ◽  
Vibration Analysis ◽  
Natural Frequencies ◽  
Free Vibrations ◽  
Mode Shapes ◽  
Coupling Effects ◽  
Centrifugal Stiffening ◽  
Shaft Deflection ◽  
Forced Vibration Analysis

The effect of multistage coupling on the dynamics of a rotor consisting of eight bladed discs on a solid shaft is considered. Free vibrations are examined using finite element representations of rotating single blades, bladed discs, and the complete rotor. In this study, the global rotating mode shapes of flexible tuned bladed discs-shaft assemblies are calculated. Rotational effects, such as centrifugal stiffening are accounted for. The calculated natural frequencies obtained from the blade, the shaft, the bladed disc, and the complete shaft with discs are carefully examined to discover resonance conditions and the coupling effects. It was found that the flexible modes of the tuned bladed discs affected by shaft motion are those with zero, one and two nodal diameters. In these modes the shaft deflection is clearly visible. Different EO excitation is applied for particular stages in forced vibration analysis.

scholarly journals Forced Vibration Analysis of Laminated Composite Shells Reinforced with Graphene Nanoplatelets Using Finite Element Method

2020 ◽  
Vol 2020 ◽  
pp. 1-17 ◽  
Author(s):  
Trung Thanh Tran ◽  
Van Ke Tran ◽  
Pham Binh Le ◽  
Van Minh Phung ◽  
Van Thom Do ◽  
...  
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Forced Vibration ◽  
Vibration Analysis ◽  
Shear Deformation Theory ◽  
Laminated Composite ◽  
Thermal Environments ◽  
Forced Vibration Analysis ◽  
Laminated Composite Shells ◽  
Element Method

This paper carries out forced vibration analysis of graphene nanoplatelet-reinforced composite laminated shells in thermal environments by employing the finite element method (FEM). Material properties including elastic modulus, specific gravity, and Poisson’s ratio are determined according to the Halpin–Tsai model. The first-order shear deformation theory (FSDT), which is based on the 8-node isoparametric element to establish the oscillation equation of shell structure, is employed in this work. We then code the computing program in the MATLAB application and examine the verification of convergence rate and reliability of the program by comparing the data of present work with those of other exact solutions. The effects of both geometric parameters and mechanical properties of materials on the forced vibration of the structure are investigated.

Large Amplitude Forced Vibration Analysis of Stiffened Plates under Harmonic Excitation

2012 ◽  
pp. 26-61
Author(s):  
Anirban Mitra ◽  
Prasanta Sahoo ◽  
Kashinath Saha
Keyword(s):  
Free Vibration ◽  
Forced Vibration ◽  
Large Amplitude ◽  
Vibration Analysis ◽  
Mathematical Formulation ◽  
Free Vibration Analysis ◽  
Harmonic Excitation ◽  
Stiffened Plates ◽  
Backbone Curve ◽  
Forced Vibration Analysis

Large amplitude forced vibration behaviour of stiffened plates under harmonic excitation is studied numerically incorporating the effect of geometric non-linearity. The forced vibration analysis is carried out in an indirect way in which the dynamic system is assumed to satisfy the force equilibrium condition at peak excitation amplitude. Large amplitude free vibration analysis of the same system is carried out separately to determine the backbone curves. The mathematical formulation is based on energy principles and the set of governing equations for both forced and free vibration problems derived using Hamilton’s principle. Appropriate sets of coordinate functions are formed by following the two dimensional Gram-Schmidt orthogonalization procedure to satisfy the corresponding boundary conditions of the plate. The problem is solved by employing an iterative direct substitution method with an appropriate relaxation technique and when the system becomes computationally stiff, Broyden’s method is used. The results are furnished as frequency response curves along with the backbone curve in the dimensionless amplitude-frequency plane. Three dimensional operational deflection shape (ODS) plots and contour plots are provided in a few cases.

Free vibration analysis of a rectangular plate carrying multiple various concentrated elements

2003 ◽  
Vol 217 (2) ◽  
pp. 171-183 ◽  
Author(s):  
J-S Wu ◽  
H-M Chou ◽  
D-W Chen
Keyword(s):  
Finite Element ◽  
Free Vibration ◽  
Boundary Conditions ◽  
Rectangular Plate ◽  
Normal Mode ◽  
Vibration Analysis ◽  
Natural Frequencies ◽  
Free Vibration Analysis ◽  
Equation Of Motion ◽  
Mode Shapes

The dynamic characteristic of a uniform rectangular plate with four boundary conditions and carrying three kinds of multiple concentrated element (rigidly attached point masses, linear springs and elastically mounted point masses) was investigated. Firstly, the closed-form solutions for the natural frequencies and the corresponding normal mode shapes of a rectangular ‘bare’ (or ‘unconstrained’) plate (without any attachments) with the specified boundary conditions were determined analytically. Next, by using these natural frequencies and normal mode shapes incorporated with the expansion theory, the equation of motion of the ‘constrained’ plate (carrying the three kinds of multiple concentrated element) were derived. Finally, numerical methods were used to solve this equation of motion to give the natural frequencies and mode shapes of the ‘constrained’ plate. To confirm the reliability of previous free vibration analysis results, a finite element analysis was also conducted. It was found that the results obtained from the above-mentioned two approaches were in good agreement. Compared with the conventional finite element method (FEM), the approach employed in this paper has the advantages of saving computing time and achieving better accuracy, as can be seen from the existing literature.

Sign in / Sign up

Export Citation Format

Share Document