Heat Transfer Enhancement in Split and Recombine Flow Configurations: A Numerical and Experimental Study

2016 ◽  
Author(s):  
Mojtaba Jarrahi ◽  
Jean-Pierre Thermeau ◽  
Hassan Peerhossaini
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Heat Exchanger ◽  
Transfer Coefficient ◽  
Convective Heat Transfer ◽  
Heat Transfer Enhancement ◽  
Convective Heat ◽  
Convective Heat Transfer Coefficient ◽  
Working Fluid ◽  
Transfer Enhancement

Heat transfer enhancement in laminar regime by split and recombine (SAR) mechanism, based on the baker’s transformation, is investigated. Two different heat exchangers, called SAR1 and SAR2, are studied. Their geometries are inspired from the previous studies reported in the literature. The working fluid on both, shell and tube side, is water and the temperature on the shell side is kept constant. Experiments are carried out for the Reynolds number range 100<Re<3000 when the Prandtl number is between 4.5 and 7.5. The results show that the convective heat transfer coefficient in the first element of heat exchanger SAR1 is higher than that in the second one, i.e. SAR2. However, the variation in the convective heat transfer coefficient from the first to the third element along the heat exchanger SAR2 is less significant than that observed for SAR1. Moreover, SAR2 causes a higher pressure drop, especially when Re>1000, and provides a less uniform temperature field at the outlet.

scholarly journals Experimental Study on a Pulsation-enhanced Heat Transfer Device

2020 ◽  
Vol 6 (4) ◽  
pp. 243-251
Author(s):  
Z. Liu ◽  
A. Levtsev ◽  
Y. Zhou
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Heat Exchanger ◽  
Heat Flow ◽  
Transfer Coefficient ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Convective Heat Transfer Coefficient ◽  
Pulsation Frequency ◽  
Enhanced Heat Transfer

The pulsation-enhanced heat transfer technology is introduced, and a volume coil heat exchanger is designed. A pulsation valve is installed at the heat exchanger outlet of the heat exchanger to pulsate the heat medium, and the same heat exchanger is subjected to pulsation and non-pulsation heat transfer tests. Based on the experiments, combined with the theory of pulsation-enhanced heat transfer technology, heat transfer capacity, heat flow, and convective heat transfer coefficient coefficients, the effective temperature difference, heat flow, and convective heat transfer coefficient of the heat exchanger at different pulse frequencies are analyzed. The relationship between the pulsation frequency of the heat transfer effect of the heat exchanger is obtained. The test results show that the heat exchanger has higher heat exchange efficiency when there is pulsation under the test conditions.

scholarly journals Convective Heat Transfer Enhancement in Nanofluids: Real Anomaly or Analysis Artifact?

2011 ◽  
Author(s):  
Naveen Prabhat ◽  
Jacopo Buongiorno ◽  
Lin-wen Hu
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Laminar Flow ◽  
Turbulent Flow ◽  
Transfer Coefficient ◽  
Temperature Dependence ◽  
Convective Heat Transfer ◽  
Heat Transfer Enhancement ◽  
Convective Heat ◽  
Transfer Enhancement

The nanofluid literature contains many claims of anomalous convective heat transfer enhancement in both turbulent and laminar flow. To put such claims to the test, we have performed a critical detailed analysis of the database reported in 12 nanofluid papers (8 on laminar flow and 4 on turbulent flow). The methodology accounted for both modeling and experimental uncertainties in the following way. The heat transfer coefficient for any given data set was calculated according to the established correlations (Dittus-Boelter’s for turbulent flow and Shah’s for laminar flow). The uncertainty in the correlation input parameters (i.e. nanofluid thermo-physical properties and flow rate) was propagated to get the uncertainty on the predicted heat transfer coefficient. The predicted and measured heat transfer coefficient values were then compared to each other. If they differed by more than their respective uncertainties, we judged the deviation anomalous. According to this methodology, it was found that in nanofluid laminar flow in fact there seems to be anomalous heat transfer enhancement in the entrance region, while the data are in agreement (within uncertainties) with the Shah’s correlation in the fully developed region. On the other hand, the turbulent flow data could be reconciled (within uncertainties) with the Dittus-Boelter’s correlation, once the temperature dependence of viscosity was included in the prediction of the Reynolds number. While this finding is plausible, it could not be conclusively confirmed, because most papers do not report information about the temperature dependence of the viscosity for their nanofluids.

Measurement of Heat Transfer Enhancement and Pressure Drop Across Eddy Promoter Air Screens in a Liquid-to-Air-Membrane Energy Exchanger (LAMEE)

2013 ◽  
Author(s):  
Ashkan Oghabi ◽  
Davood Ghadiri Moghaddam ◽  
Carey Simonson ◽  
Robert W. Besant
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Pressure Drop ◽  
Transfer Coefficient ◽  
Convective Heat Transfer ◽  
Heat Transfer Enhancement ◽  
Convective Heat Transfer Coefficient ◽  
Transfer Enhancement ◽  
Membrane Energy ◽  
Air Channel

In liquid-to-air membrane energy exchangers (LAMEEs), the heat and mass transfer resistances in the air channel are dominant. An eddy promoter air screen can effectively enhance the heat and mass transfers in the air channel. In this study, the heat transfer enhancement and pressure drop across three different eddy promoter air screens in an air channel are experimentally investigated. Eddy promoter air screens are comprised of plastic ribs in the stream-wise direction and aluminum cross-bars normal to the air flow direction. A low speed wind tunnel test facility, which simulates the air channel of a LAMEE is designed to measure the friction factor and enhanced convective heat transfer coefficient in the air channel with an eddy promoter air screen. Tests were conducted at Reynolds numbers of 920, 1550, and 2160. In this paper, the effects of the spacing of the cylindrical bars and plastic ribs on the heat transfer performance are studied experimentally. Also, the performance of eddy promoter air screens as a function of enhanced heat transfer coefficient and increased pressure drop is investigated. Results show that the eddy promoter air screens have the highest efficiencies at Reynolds of 1550 and double the convective heat transfer coefficient of the air with respect to a smooth channel.

Thermodynamic analysis of an α-type Stirling engine with variable phase angle

2007 ◽  
Vol 221 (8) ◽  
pp. 949-954 ◽  
Author(s):  
C Çinar
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Convective Heat Transfer ◽  
Phase Angle ◽  
Convective Heat ◽  
Convective Heat Transfer Coefficient ◽  
Stirling Engine ◽  
Working Fluid ◽  
Variable Phase

In this study, a variable phase angle, α-type Stirling engine was described and analysed from kinematic and thermodynamics point of view. Kinematic relations were described for the calculation of hot and cold cylinder volumes. The instantaneous temperature distribution of the working fluid, through the heating—cooling passages and regenerator, was calculated by preparing a nodal analysis in FORTRAN. Effect of phase angle variation on work generation was examined. By using three different convective heat transfer coefficient, which were 200, 300, and 400 W/m2 K, variation of work generation with working fluid mass was examined. For the same values of convective heat transfer coefficient, variation of engine power versus the engine speed was examined.

Heat Transfer Analysis of Internally Grooved Copper Tube R404-A Evaporators

2012 ◽  
Author(s):  
Cenk Onan ◽  
Derya B. Ozkan ◽  
Levent Ceran
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Heat Exchanger ◽  
Transfer Coefficient ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Convective Heat Transfer Coefficient ◽  
Copper Tube ◽  
Tube Heat Exchanger ◽  
Grooved Tube

Internally grooved copper tubes are used extensively in HVAC applications, direct expansion batteries and air or water cooled heat exchangers. The advantage of internally grooved copper tubes in evaporator and condenser units is an increase in the refrigerant-side heat transfer coefficient. When an internally grooved tube heat exchanger and a smooth-tube heat exchanger with the same dimensions are compared, the overall heat transfer coefficient and convective heat transfer coefficient are found to increase in different ratios. In addition to this difference, the refrigerant side pressure is found to be a function of the groove geometry, pitch space and choice of refrigerant. In this study, which is different from previous studies in the literature performed using single internally grooved tube condensers and evaporators, refrigerant R404-A is studied in the internally grooved tube evaporator. The heat transfer in the evaporator described here is 30% better than that observed in a conventional smooth-copper-tube evaporator. In the internally grooved tube, the internal surface area is 68% larger than that inside the smooth reference tube. As a result, the convective heat transfer coefficient inside the internally grooved tube is found to be lower than that in the smooth tube.

Sign in / Sign up

Export Citation Format

Share Document