Large Eddy Simulation of Turbulent Flow and Heat Transfer Characteristics in Rectangle Channel With Vortex Generators

2010 ◽  
Author(s):  
Juan Wen ◽  
Li Yang ◽  
Cheng Ying Qi
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Heat Transfer Enhancement ◽  
Coherent Structure ◽  
Vortex Generator ◽  
Vortex Generators ◽  
Transfer Enhancement ◽  
Heat Transfer Characteristics ◽  
Eddy Simulation ◽  
Large Eddy

The flow structures and heat transfer characteristics of rectangle channel with the new type of vortex generators are obtained using large eddy simulation (LES) and by the application of the hydromechanics software FLUENT6.3. The bevel-cut half-elliptical column vortex generators, which is one model of the passive heat transfer enhancement, are laid on the three-dimensional rectangle channel. The instantaneous characteristic and the variational law of various parameters, such as the velocity, the temperature, the pressure and the vorticity magnitude, is analyzed to find out the temperature stripe structure that is similar with the velocity stripe in the temperature field. A turbulent boundary layer interacting with the disturbance of the vortex generators, is investigated using a “coherent structure” type of approach. The coherent structure and the streak structure of turbulent boundary layer flow are showed and the characteristic of vortex induced by vortex generator and its influence on turbulent coherent structure are analyzed. The control of the coherent structure induced by vortex generator plays more important role in heat transfer enhancement and drag reduction. And this fow configuration is of interest in terms of both heat transfer and skin friction control. The result of simulation indicates that the turbulence coherent structure directly affects the temperature gradient at the wall and the heat transfer enhancement mechanism of vortex generator is explained. Then we can seek suitable form of vortex generator and structure parameters, in order to achieve enhanced heat transfer and flow of drag reduction.

Numerical Investigation of Heat Transfer Enhancement on a Small Scale Vortex Generator

2009 ◽  
Author(s):  
Jiansheng Wang ◽  
Zhiqin Yang
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Enhancement ◽  
Flow Structure ◽  
Rectangular Channel ◽  
Vortex Generator ◽  
Local Heat Transfer ◽  
Local Heat ◽  
Vortex Generators ◽  
Small Scale ◽  
Transfer Enhancement

The heat transfer characteristic and flow structure of fluid in the rectangular channel with different height vortex generators in small scale are investigated with numerical simulation. Meantime, the properties of heat transfer and flow of fluid in the rectangular channel are compared with the channel which located small scale vortex generator. The variation law of local heat transfer and flow structure in channel is obtained. The mechanism of heat transfer enhancement of small scale vortex generators is discussed in detail. It is found that the influence of vortex generator on heat transfer is not in proportion to the size of vortex generator. What is more, turbulent flow structure near the wall, which influences the temperature distribution near the wall, induces the variety of local heat transfer. The fluid movement towards to the wall causes the heat transfer enhanced. On the contrary, the fluid movement away from the wall decreases the local heat transfer.

scholarly journals Numerical Study on the Influence of Vortex Generator Arrangement on Heat Transfer Enhancement of Oil-Cooled Motor

Energies ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 6870
Author(s):  
Junjie Zhao ◽  
Bin Zhang ◽  
Xiaoli Fu ◽  
Shenglin Yan
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Heat Transfer Enhancement ◽  
Vortex Generator ◽  
Attack Angle ◽  
Vortex Generators ◽  
Dimensionless Number ◽  
Transfer Enhancement ◽  
Enhanced Heat Transfer ◽  
Longitudinal Distance

At present, vortex generators have been extensively used in radiators to improve the overall heat transfer performance. However, there is no research on the effect of vortex generators on the ends of motor coils. Meanwhile, the current research mainly concentrates on the attack angle, shape and size, and lacks a detailed study on the transverse and longitudinal distance and arrangement of vortex generators. In this paper, the improved dimensionless number is used as the key index to evaluate the overall performance of enhanced heat transfer. Firstly, the influence of the attack angle on heat transfer enhancement is discussed through a single pair of rectangular vortex generators, and the results demonstrate that the vortex generator with a 45° attack angle is superior. On this basis, we compare the effects of different longitudinal distances (2 h, 4 h, and 6 h, h meaning the height of vortex generator) on enhanced heat transfer under four distribution modes: Flow-Up (FU), Flow-Down (FU), Flow-Up-Down (FUD), Flow-Down-UP (FDU). Thereafter, the performances of different transverse distances (0.25 h, 0.5 h, and 0.75 h) of the vortex generators are numerically simulated. When comparing the longitudinal distances, FD with a longitudinal distance of 4 h (FD-4h) performs well when the Reynolds number is less than 4000, and FU with a longitudinal distance of 4 h (FU-4h) performs better when the Reynolds number is greater than 4000. Similarly, in the comparison of transverse distances, FD-4h still performs well when the Reynolds number is less than 4000, and FU with a longitudinal distance of 4 h and transverse distance of 0.5 h (FU-4h − 0.5h) is more prominent when the Reynolds number is greater than 4000.

A Critical Review of the Prominent Method of Heat Transfer Enhancement for the Fin-and-Tube Heat Exchanger by Interrupted Fin Surface: The Vortex Generators Approach

2018 ◽  
Vol 26 (03) ◽  
pp. 1830001 ◽  
Author(s):  
Nares Chimres ◽  
Somchai Wongwises
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Heat Transfer Enhancement ◽  
Flow Characteristics ◽  
Vortex Generator ◽  
Vortex Generators ◽  
Experimental Investigations ◽  
Transfer Enhancement ◽  
Tube Heat Exchanger ◽  
Performance Indexes

The performance of heat exchangers impacts industry investment, energy consumption, and pollution because the heat exchanger has been used in many industries. The use of vortex generators on the fin is the prominent method of heat transfer enhancement because the performance indexes of fins with vortex generators are greater than those of the fins without vortex generators. However, this method faces obstacles because the concepts and design instructions are still obscure. Therefore, this paper provides a summary of the publications about the use of vortex generators. The publications on the effects of traditional and alternative vortex generators that are combined with plain, wavy, and louver fins are summarized. The aim of this paper is to aggregate the publications concerned with the thermal performance and flow characteristics of the fin-and-tube heat exchanger with vortex generator using numerical and experimental investigations as the guideline for future studies.

scholarly journals Heat-Transfer and Mixing Enhancement by Vortex Generators Used in Heat Exchanger-Reactors

2003 ◽  
Author(s):  
S. Ferrouillat ◽  
P. Tochon ◽  
C. Garnier ◽  
H. Peerhossaini
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Heat Transfer Enhancement ◽  
Flow Direction ◽  
Vortex Generator ◽  
Chemical Reactor ◽  
Vortex Generators ◽  
Mixing Enhancement ◽  
Transfer Enhancement ◽  
Longitudinal Vortices

Compact heat exchangers are well known for their ability to transfer a large amount of heat while retaining low volume and weight. The purpose of this paper is to study the potential of using this device as a chemical reactor, generally called a heat exchanger-reactor (HEX reactor). Indeed, the question arises: can these geometries combine heat transfer and mixing in the same device? Such a technology would offer many potential advantages, such as better reaction control (through the thermal aspect), improved selectivity (through intensified mixing, more isothermal operation and shorter residence time, and sharper RTDs), byproduct reduction, and enhanced safety. Several geometries of compact heat exchanger based on turbulence generation are available. This paper focuses on one type: vortex generators. The main objective is to contribute to the determination of turbulent flow inside various geometries by computational fluid dynamics methods. These enhanced industrial geometries are studied in terms of their thermal-hydraulic performance and macro-/micro-mixing ability. The longitudinal vortices they generate in a channel flow turn the flow perpendicular to the main flow direction and enhance mixing between the fluid close to the fin and that in the middle of the channel. Two kinds of vortex generators are considered: a delta winglet pair and a rectangular winglet pair. For both, good agreement is obtained between numerical results and data in the literature. The vortex generator concept is found to be very efficient in terms of heat-transfer enhancement and macro-mixing. Nevertheless, the micro-mixing level is poor due to strong inhomogeneities: the vortex generator must be used as a heat-transfer enhancement device or as a static mixer for macro- and meso-mixing.

Sign in / Sign up

Export Citation Format

Share Document