Upper Bound Solutions of Vertical Bearing Capacity of a New Type Bucket Foundation in Sand

Author(s):  
Run Liu ◽  
Guangsi Chen ◽  
Hongyan Ding ◽  
Jijian Lian

Offshore wind turbine is a new solution of the energy crisis, and stable foundation is an important guarantee for its safety. An important characteristic of wind turbine foundation is to bear the vertical load, horizontal load and moment at runtime. A large diameter wide-shallow bucket foundation, as a new foundation type, is proposed by Tianjin University for applying to the specific load conditions. The diameter of the foundation is generally more than 30 m, and its embedment ratio is between 0.2 and 0.5. Compared with other traditional forms of ocean engineering foundation, there have been no standards and theories for bucket foundation designing currently. The vertical bearing capacity is an important basic indicator in the process of offshore wind turbine foundation designing, which determines the size of wind turbines and the cost of engineering. This paper proposes two failure mechanisms about vertical bearing capacity of bucket foundation through the experiment. The upper value of vertical bearing capacity of bucket foundation has been derived through the upper bound theorem of classical plasticity theory. Soil damaging rate is specified as a new empirical parameter in the formula. It is defined as the rate between the thickness of the soil which is broken inside the foundation and the radius of foundation, which indicates the range of soil failure. And the number range of soil damaging rate is obtained through the vertical bearing capacity experiments. Relationship between bearing capacity factor Nγ and friction angle also discussed under the specific soil damaging rates. These results are helpful in reducing the uncertainties related to the method of analysis in bearing capacity calculations, paving the way for more cost-effective foundation design.

Author(s):  
Guodong Sun ◽  
Run Liu ◽  
Jijian Lian ◽  
Runbo Cai ◽  
Xu Yang ◽  
...  

Abstract The wide-shallow bucket foundation proposed by Tianjin University of China is a new type of offshore wind turbine foundation. In this paper, the vertical bearing capacity of wide-shallow bucket foundation embedded in two layered sand that contains an underlying medium strength sand layer and a weaker or stronger overlaying sand layer is studied. A parametric study for bearing capacity is carried out with the ratio of unit weight γ1/γ2 (where γ1 and γ2 are the unit weight of the upper and lower sand layers respectively), the ratio of internal friction angle φ1/φ2 (where φ1 and φ2 are the internal friction angle of the upper and lower sand layers respectively) and relative thickness of the top sand layer H1/B (where H1 and B are the thickness of the top sand layer and the bucket foundation diameter). All of the presents were performed by the Finite Element Method and the results show that the thickness of the top layer has a great influence on the vertical bearing capacity of the foundation. Specifically, the upper sand layer is stronger, the bearing capacity ascends with the increase of the thickness of the top layer, and on the contrary, the upper layer is weaker, and the bearing capacity decreases with the increase of the top layer thickness. In addition, the bearing capacity of the foundation also increases with the ratios of the effective unit weight and the internal friction angle.


2021 ◽  
Vol 235 ◽  
pp. 109387
Author(s):  
Jijian Lian ◽  
Junni Jiang ◽  
Xiaofeng Dong ◽  
Haijun Wang ◽  
Huan Zhou

Energies ◽  
2020 ◽  
Vol 13 (19) ◽  
pp. 5102
Author(s):  
Yu Hu ◽  
Jian Yang ◽  
Charalampos Baniotopoulos

Offshore wind energy is a rapidly maturing renewable energy technology that is poised to play an important role in future energy systems. The respective advances refer among others to the monopile foundation that is frequently used to support wind turbines in the marine environment. In the present research paper, the structural response of tall wind energy converters with various stiffening schemes is studied during the erection phase as the latter are manufactured in modules that are assembled in situ. Rings, vertical stiffeners, T-shaped stiffeners and orthogonal stiffeners are considered efficient stiffening schemes to strengthen the tower structures. The loading bearing capacity of offshore monopile wind turbine towers with the four types of stiffeners were modeled numerically by means of finite elements. Applying a nonlinear buckling analysis, the ultimate bearing capacity of wind turbine towers with four standard stiffening schemes were compared in order to obtain the optimum stiffening option.


2020 ◽  
Vol 8 (7) ◽  
pp. 543
Author(s):  
Weiqiu Zhong ◽  
Wuxu Li ◽  
Tao Yang ◽  
Deming Liu ◽  
Lintao Li

The bearing capacity of the grouted connections is investigated through the model test and numerical simulation with two rates (low and high) and four kinds of specimens: shorter without shear keys, shorter with shear keys, longer with shear keys, and conical with shear keys. It reveals that the bearing characteristics of the specimen of longer with shear keys is worse than the specimen of conical with shear keys, but better than the specimen of shorter with shear keys. Moreover, the bearing characteristics of the specimen of shorter without shear keys is the worst one.


2014 ◽  
Vol 488-489 ◽  
pp. 629-634
Author(s):  
Shuai Liu ◽  
Wen Bai Liu ◽  
Liang Yang

Through eight groups of room model experiments based on bucket foundation, P-S curve can be plotted for each group according to the experiments results and be able to get the ultimate strength and ultimate displacement for them. Therefore how the ratio of the ultimate vertical bearing capacity and the ultimate displacement changes with the ratio of diameter to height can be analyzed. When the ratio of diameter to height is less than 1.2, the ratio of the ultimate vertical bearing capacity and the ultimate displacement changes significantly; and when the ratio of diameter to height is greater than 1.2, the ratio of ultimate vertical bearing capacity and ultimate displacement is not affected obviously. When the ratio of diameter to height is 1.2, it reaches the maximum utilization of the materials, and the cost of the project can be effectively reduced. So the paper considers that the ratio of diameter to height = 1.2 can be used as the optimum point of the ratio of diameter to height of the bucket foundation.


2020 ◽  
Vol 199 ◽  
pp. 107037 ◽  
Author(s):  
Puyang Zhang ◽  
Jingyi Li ◽  
Yi Gan ◽  
Jinfu Zhang ◽  
Xin Qi ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document