Thermodynamic Analysis of a Solar-Coal Hybrid Poly-Generation Process for Methanol Synthesis and Power Generation

Author(s):  
Tuantuan Xin ◽  
Cheng Xu ◽  
Gang Xu ◽  
Wenyi Liu ◽  
Yongping Yang

To advance the utilization of the solar energy and coal resources as well as improve the flexibility of coal-based power plant, an improved solar-coal hybrid system for methanol production and power generation is proposed and thermodynamically analyzed. In the proposed system, the concentrated solar energy at high-temperature is used for heating the coal gasification to produce syngas for methanol synthesis; the waste material and heat from coal-to-methanol process are efficiently recovered in the conjunct power generation system; and the surplus electric power is optionally used for methanol synthesis by electrolysis process during the off-peak period. Through employing the proposed system, the solar energy and electricity (optional) could be effectively converted into methanol as stable chemical energy together with a preferable overall system thermal efficiency. The thermodynamic analysis results showed that, the overall energy and exergy efficiencies reaches 48.6 and 47.3%, respectively; the equivalent solar-to-methanol conversion efficiency can soar to 66.2%; and the net electricity-to-methanol efficiency reaches 61.6% with the power load reducing from 48.7% to 31.0%.

2020 ◽  
Vol 45 (49) ◽  
pp. 26117-26125 ◽  
Author(s):  
Nathalie Monnerie ◽  
Philipe Gunawan Gan ◽  
Martin Roeb ◽  
Christian Sattler

Author(s):  
Francis A. Di Bella ◽  
Jonathan Gwiazda

This paper reviews a novel power generation system that improves the overall efficiency of concentrated solar energy systems while also providing for the cost effective reclamation and utilization of a man-made geo-physical phenomenon: decommissioned, open pit mines. A preliminary feasibility will be presented of an integrated system consisting of a concentrated solar energy powered Rankine Cycle system and the authors’ novel (patent pending) energy recovery system that consists of a thermally induced, pneumatic (wind turbine) power tube system (Pneumatic Power Tube) that is designed with reflective surfaces for concentrating solar energy. The proposed system is unique in the field of power generation using renewable/natural resources while also providing a solution to the reclamation and utilization of depleted open pit mines. The paper presents a parametric feasibility study of the proposed system installed for a range of “small” and “large” open-pit mines, such as the Palabora copper open pit mine located in South Africa. Using state-of-the-art specifications for power generation from concentrated solar energy systems based on D.O.E. supported research, a average size integrated installations could generate approx. 700–750 Mwe with 12–18 Mwe contributed by the new Pneumatic Power Pit Tubes. The enhancements include a unique design for a pneumatic power tube that combines the functions of solar collector/reflector with a hot air “chimney” air diffuser and wind power generation. A schematic of the proposed integrated system is also provided. The paper also presents a summary of the major technical benefits of the proposed system including the synergisms between the proposed renewable energy system and the application of DOE’s microwave power generation and transmission as well as the societal benefits of reclaiming land areas that are otherwise not suitable for habitation. Suggestions will also be made as to the application of authors’ pneumatic wind turbine power tubes to other large, naturally occurring geo-physical phenomenon.


2011 ◽  
Vol 71-78 ◽  
pp. 2562-2565
Author(s):  
Tao Du ◽  
Jian Bo Yang ◽  
Hong Lin Zhang

The current domestic conditions of sintering waste heat generation are introduced. The waste heat utilization methods are given according to waste heat characteristics of 360m2 sintering machine. The particle regenerative heat exchanger model is used to calculate heat transfer area of the first part of the circular-cooler. The logarithmic mean temperature difference method is used to calculate the heat transfer of closed cycle cooling air and the temperature of exhaust gas. The thermodynamic analysis of sintering heat generation process is completed. The power generation efficiency and quantity are calculated by using the heat balance and exergy analysis method.


Author(s):  
Shimin Deng ◽  
Rory Hynes

In this paper, pressurized oxy-fuel combustion power generation processes are modeled and analyzed based on a 350 MW subcritical reheat boiler associated with a condensing steam turbine. The performance results are obtained. Furthermore, the influences of slurry concentration and coal properties on power plant performance are investigated. An oxy-fuel configuration operating at ambient pressure is studied to compare the performance with pressurized oxy-fuel configuration. Thermodynamic analysis reveals the true potentials of the pressurized oxy-fuel process. Based on the system integration, an improved configuration is proposed in which plant efficiency of pressurized oxy-fuel process is increased by 1.36%.


Author(s):  
Shimin Deng ◽  
Rory Hynes

In this paper, pressurized oxy-fuel combustion power generation processes are modeled and analyzed based on a 350 MW subcritical reheat boiler associated with a condensing steam turbine. The performance results are obtained. Furthermore, the influences of slurry concentration and coal properties on power plant performance are investigated. An oxy-fuel configuration operating at ambient pressure is studied to compare the performance with pressurized oxy-fuel configuration. Thermodynamic analysis reveals the true potentials of the pressurized oxy-fuel process. Based on the system integration, an improved configuration is proposed in which plant efficiency of pressurized oxy-fuel process is increased by 1.36%.


Sign in / Sign up

Export Citation Format

Share Document