Alternative Reference Temperature Based on Master Curve Approach in Japanese Reactor Pressure Vessel Steel

2013 ◽  
Author(s):  
Takatoshi Hirota ◽  
Takashi Hirano ◽  
Kunio Onizawa
Keyword(s):  
Fracture Toughness ◽  
Pressure Vessel ◽  
Master Curve ◽  
Reactor Pressure Vessel ◽  
Test Method ◽  
Reference Temperature ◽  
Ferritic Steels ◽  
Pressure Vessel Steel ◽  
Reactor Pressure

Master Curve approach is the effective method to evaluate the fracture toughness of the ferritic steels accurately and statistically. The Japan Electric Association Code JEAC 4216-2011, “Test Method for Determination of Reference Temperature, To, of Ferritic Steels” was published based on the related standard ASTM E 1921-08 and the results of the investigation of the applicability of the Master Curve approach to Japanese reactor pressure vessel (RPV) steels. The reference temperature, To can be determined in accordance with this code in Japan. In this study, using the existing fracture toughness data of Japanese RPV steels including base metals and weld metals, the method for determination of the alternative reference temperature RTTo based on Master Curve reference temperature To was statistically examined, so that RTTo has an equivalent safety margin to the conventional RTNDT. Through the statistical treatment, the alternative reference temperature RTTo was proposed as the following equation; RTTo = To + CMC + 2σTo. This method is applicable to the Japan Electric Association Code JEAC 4206, “Method of Verification Tests of the Fracture Toughness for Nuclear Power Plant Components” as an option item.

Study on Applicability of Master Curve Methodology Using Miniature C(T) Specimen to a Reactor Pressure Vessel With Low Upper Shelf Energy

2018 ◽  
Author(s):  
Kentaro Yoshimoto ◽  
Takatoshi Hirota ◽  
Hiroyuki Sakamoto ◽  
Masato Oshikiri ◽  
Kazuya Tsutsumi ◽  
...  
Keyword(s):  
Fracture Toughness ◽  
Neutron Irradiation ◽  
Pressure Vessel ◽  
Master Curve ◽  
Energy Use ◽  
Reactor Pressure Vessel ◽  
Test Method ◽  
Shelf Energy ◽  
Irradiation Embrittlement ◽  
Reactor Pressure

Miniature compact tension (Mini-C(T)) specimen can be an effective tool by utilizing together with Master Curve (MC) methodology for fracture toughness evaluation of irradiated reactor pressure vessel (RPV) steels. Recently, Mini-C(T) specimen has been incorporated into the Japanese standard test method related to MC methodology, JEAC4216-2015 and several studies were found focusing on applicability of Mini-C(T) specimen to irradiated RPV materials. However, there exist some other issues to be resolved considering application to irradiated materials. One of them is violation against the limitation criteria for ductile crack growth (DCG) specified in the standards. In general, upper shelf energy (USE) of RPV materials tends to decrease as well as shift in Charpy transition temperature due to neutron irradiation embrittlement. It may cause reduction in resistance of material against DCG and this leads to the problem peculiar to low USE materials such that the limitation for DCG might be dominant rather than that for KJclimit. Therefore, it is possible to fail to obtain valid KJc data even within valid temperature range of MC methodology, i.e. −50°C ≤ T-To ≤ 50°C, for low USE materials using Mini-C(T) specimens. In this study, the RPV steel with USE lower than 68J was made simulating reduction of USE due to neutron irradiation. Fracture toughness tests were performed using Mini-C(T) specimens as well as the standard 1T-C(T) specimens. Based on the test results, the validity for DCG limitation was also evaluated for each datum by post-test observation of fracture surface. Additionally, effectiveness of added side grooves and double thickness of specimen was examined as a countermeasure for Mini-C(T) specimen.

Validation of RTT0 for German Reactor Pressure Vessel Steels

2008 ◽  
Vol 130 (3) ◽  
Author(s):  
Dieter Siegele ◽  
Elisabeth Keim ◽  
Gerhard Nagel
Keyword(s):  
Fracture Toughness ◽  
Pressure Vessel ◽  
Master Curve ◽  
Reactor Pressure Vessel ◽  
Reference Temperature ◽  
Data Sets ◽  
Asme Code ◽  
Definition Of ◽  
Size Adjustment ◽  
Reactor Pressure

For the introduction of the new reference temperature RTT0 of the ASME Code Cases N-629 and N-631 into the German Standard KTA 3201.2, the applicability of RTT0 was validated by the reevaluation of the existing fracture toughness database of German reactor pressure vessel. (RPV) steels including unirradiated and irradiated base materials and weld metal data. The test temperatures of the database were standardized to the reference temperature T0 of the master curve of the data sets and the database was compared with the ASME KIC-curve as adjusted by RTT0. The KIC-curve adjusted by RTT0 enveloped both the 1T-size adjusted database and also the as-measured database, corresponding to the definition of RTT0. Thus, the results also prove the validity of the KIC(RTT0)-curve for allowable flaw sizes and up to the crack length spectrum of the ASME KIC-database without size adjustment of T0. The results of both investigations confirmed the validity of RTT0 for German RPV steels. The majority of existing fracture toughness data are based on KIC-values. More recent data are (KJC) related to the issuing of ASTM E 1921 in 1997 and to the success of the master curve-based T0 approach. Therefore, the possible difference between T0 determined from KJC and from KIC was investigated with available databases for RPV steels. The comparison of T0(KJC) and T0(KIC) showed a 1:1 correlation proving the equivalence of KJC and KIC in the determination of T0.

Investigation of the Beltline Welding Seam and Base Metal of the Greifswald WWER-440 Unit 1 Reactor Pressure Vessel

2009 ◽  
Author(s):  
Jan Schuhknecht ◽  
Hans-Werner Viehrig ◽  
Udo Rindelhardt
Keyword(s):  
Weld Metal ◽  
Base Metal ◽  
Pressure Vessel ◽  
Master Curve ◽  
Reactor Pressure Vessel ◽  
Reference Temperature ◽  
Metal Ring ◽  
Welding Seam ◽  
Root Region ◽  
Reactor Pressure

The investigation of reactor pressure vessel (RPV) materials from decommissioned NPPs offers the unique opportunity to scrutinize the irradiation behaviour under real conditions. Material samples taken from the RPV wall enable a comprehensive material characterisation. The paper describes the investigation of trepans taken from the decommissioned WWER-440 first generation RPVs of the Greifswald NPP. Those RPVs represent different material conditions such as irradiated (I), irradiated and recovery annealed (IA) and irradiated, recovery annealed and re-irradiated (IAI). The working program is focussed on the characterisation of the RPV steels (base and weld metal) through the RPV wall. The key part of the testing is aimed at the determination of the reference temperature T0 following the ASTM Test Standard E1921-05 to determine the fracture toughness of the RPV steel in different thickness locations. In a first step the trepans taken from the RPV Greifswald Unit 1 containing the X-butt multilayer submerged welding seam and from base metal ring 0.3.1 both located in the beltline region were investigated. Unit 1 represents the IAI condition. It is shown that the Master Curve approach as adopted in ASTM E1921 is applicable to the investigated original WWER-440 weld metal. The evaluated T0 varies through the thickness of the welding seam. The lowest T0 value was measured in the root region of the welding seam representing a uniform fine grain ferritic structure. Beyond the welding root T0 shows a wavelike behaviour. The highest T0 of the weld seam was not measured at the inner wall surface. This is important for the assessment of ductile-to-brittle temperatures measured on sub size Charpy specimens made of weld metal compact samples removed from the inner RPV wall. Our findings imply that these samples do not represent the most conservative condition. Nevertheless, the Charpy transition temperature TT41J estimated with results of sub size specimens after the recovery annealing was confirmed by the testing of standard Charpy V-notch specimens. The evaluated Charpy-V TT41J shows a better accordance with the irradiation fluence along the wall thickness than the Master Curve reference temperature T0. The evaluated T0 from the trepan of base metal ring 0.3.1 varies through the thickness of the RPV wall. T0 increases from −120°C at the inner surface to −104°C at a distance of 33 mm from it and again to −115°C at the outer RPV wall. The KJc values generally follow the course of the MC, although the scatter is large. The re-embrittlement during 2 campaigns operation can be assumed to be low for the weld and base metal.

Fracture Toughness Characterization of Midland Beltline Weld After High Dose of Irradiation

2006 ◽  
Author(s):  
Mikhail A. Sokolov ◽  
Randy K. Nanstad
Keyword(s):  
Fracture Toughness ◽  
Pressure Vessel ◽  
Neutron Fluence ◽  
National Laboratory ◽  
Reactor Pressure Vessel ◽  
High Dose ◽  
Pressure Vessel Steel ◽  
Vessel Steel ◽  
Oak Ridge ◽  
Reactor Pressure

The Heavy-Section Steel Irradiation (HSSI) Program at Oak Ridge National Laboratory includes a task to investigate the shape of the fracture toughness master curve for reactor pressure vessel steel highly embrittled as a consequence of irradiation exposure, and to examine the ability of the Charpy 41-J shift to predict the fracture toughness shift. As part of this task, a low upper-shelf WF-70 weld obtained from the beltline region of the Midland Unit 1 reactor pressure vessel was characterized in terms of static initiation and Charpy impact toughness in the unirradiated and irradiated conditions. Irradiation of this weld was performed at the University of Michigan Ford Reactor at 288°C to neutron fluence of 3.4×1019 neutron/cm2 in the HSSI irradiation-anneal-reirradiation facility. This reusable facility allowed the irradiation of either virgin or previously irradiated material in a well-controlled temperature regime, including the ability to perform in-situ annealing. This was the last capsule irradiated in this facility before reactor shut down. Thus, the Midland beltline weld was irradiated within the HSSI Program to three fluences — 0.5×1019; 1.0×1019; and 3.4×1019 neutron/cm2. It was anticipated that it would provide an opportunity to address fracture toughness curve shape and Charpy 41-J shift compatibility issues at different levels of embrittlement, including the highest dose considered to be in the range of the current end of life fluence. It was found that the Charpy 41-J shift practically saturated after neutron fluence of 1.0×1019 neutron/cm2. The transition fracture toughness shift after 3.4×1019 neutron/cm2 was only slightly higher than that after 1.0×1019 neutron/cm2. In all cases, transition fracture toughness shifts were lower than predicted by the Regulatory Guide 1.99, Rev. 2 equation.

Master Curve Approach for Some Japanese Reactor Pressure Vessel Steels

2008 ◽  
Author(s):  
Minoru Tomimatsu ◽  
Takashi Hirano ◽  
Seiji Asada ◽  
Ryoichi Saeki ◽  
Naoki Miura ◽  
...  
Keyword(s):  
Fracture Toughness ◽  
Power Plant ◽  
Pressure Vessel ◽  
Nuclear Power ◽  
Master Curve ◽  
Reactor Pressure Vessel ◽  
Pressure Vessel Steels ◽  
The World ◽  
Reactor Pressure ◽  
Plant Components

The Master Curve Approach for assessing fracture toughness of reactor pressure vessel (RPV) steels has been accepted throughout the world. The Master Curve Approach using fracture toughness data obtained from RPV steels in Japan has been investigated in order to incorporate this approach into the Japanese Electric Association (JEA) Code 4206, “Method of Verification Tests of the Fracture Toughness for Nuclear Power Plant Components”. This paper presents the applicability of the Master Curve Approach for Japanese RPV steels.

Evaluation of Fracture Toughness of a SA580 Gr. 3 Reactor Pressure Vessel Using a Bimodal Master Curve Approach

2019 ◽  
Vol 141 (6) ◽  
Author(s):  
Jong-Min Kim ◽  
Seok-Min Hong ◽  
Min-Chul Kim ◽  
Bong-Sang Lee
Keyword(s):  
Fracture Toughness ◽  
Cooling Rate ◽  
Pressure Vessel ◽  
Master Curve ◽  
Random Parameter ◽  
Random Inhomogeneity ◽  
Reactor Pressure Vessel ◽  
Inhomogeneous Materials ◽  
Material Inhomogeneity ◽  
Reactor Pressure

Abstract The standard master curve (MC) approach has a major limitation in that it is only applicable to homogeneous datasets. In nature, steels are macroscopically inhomogeneous. Reactor pressure vessel (RPV) steel has different fracture toughness with varying distance from the inner surface of the wall due to the higher cooling rate at the surface (deterministic material inhomogeneity). On the other hand, the T0 value itself behaves like a random parameter when the datasets have large scatter because the datasets are for several different materials (random inhomogeneity). In this paper, four regions, the surface, 1/8 T, 1/4 T, and 1/2 T, were considered for fracture toughness specimens of Korean Standard Nuclear Plant (KSNP) SA508 Gr. 3 steel to provide information on deterministic material inhomogeneity and random inhomogeneity effects. Fracture toughness tests were carried out for the four regions at three test temperatures in the transition region and the microstructure of each region was analyzed. The amount of upper bainite increased toward the center, which has a lower cooling rate; therefore, the center has lower fracture toughness than the surface so reference temperature (T0) is higher. The fracture toughness was evaluated using the bimodal master curve (BMC) approach. The results of the BMC analyses were compared with those obtained via a conventional master curve analyses. The results indicate that the bimodal master approach considering inhomogeneous materials provides a better description of scatter in the fracture toughness data than a conventional master curve analysis does.

Analysis of Large-Scale Fracture Experiments Addressing the Behaviour of Sub-Clad Flaws in Reactor Pressure Vessel Steel

2009 ◽  
Author(s):  
Philip Minnebo ◽  
Elena Paffumi ◽  
Nigel Taylor ◽  
Karl-Fredrik Nilsson ◽  
J. Palyza ◽  
...  
Keyword(s):  
Pressure Vessel ◽  
Master Curve ◽  
Large Scale ◽  
Surface Defects ◽  
Reactor Pressure Vessel ◽  
Pressure Vessel Steel ◽  
Vessel Steel ◽  
Reactor Pressure Vessel Steel ◽  
Depth Analysis ◽  
Reactor Pressure

To investigate transferability of the Master Curve methodology to shallow, sub-clad flaws in reactor pressure vessel applications, a series of six fracture tests was performed on large-scale specimens, which were fabricated from grade A533 steel and contained simulated sub-surface defects. First of all, the paper briefly describes this four-point bend test programme. Further an in-depth analysis of the experiments is presented. Detailed finite element calculations are used to compare the fracture behaviour of the large-scale bend beams with the test material’s standard Master Curve. The latter is obtained from dedicated laboratory experiments, also checking through-wall variation of brittle-to-ductile transition behaviour. This study confirms a significant constraint-loss effect related to the sub-clad defects, which is in line with findings from previous research projects.

Sign in / Sign up

Export Citation Format

Share Document