Compact probing system using remote imaging for industrial plant maintenance

2014 ◽  
Author(s):  
F. Ito ◽  
A. Nishimura
2021 ◽  
Author(s):  
Thomas Bale ◽  
andrew calway ◽  
Kirsten Cater ◽  
Chris Bevan ◽  
Robert Skilton ◽  
...  

2021 ◽  
Author(s):  
Carlos D. Girão ◽  
Igor Meira ◽  
José Carlos Veiga

Abstract A correct bolted flanged joint tightening procedure includes retorquing to restore short-term creep relaxation and embedment losses; the ASME PCC-1-2019 Tightening Method recommends a minimum of 4 hours of dwell time before retightening the bolts. It is known that in an industrial plant, maintenance costs come mostly from process downtime in addition to the labor and the tools necessary to perform the operation. Reducing the retorque waiting time would make installation quicker and avoid additional — and unnecessary — costs, returning the plant to revenue operation sooner. This paper explores whether different gasket styles should have the same dwell time between the installation and retorque, and what would be the dwell time to minimize plant downtime without compromising the gasket performance. The study was performed using a test rig based on a 4” class 300 ASME B16.5 flange equipped with eight strain-gauged bolts that correlates bolt elongation with applied stress. Four dwell times (15min, 1h, 4h and 24h) and different gasket styles and materials such as PTFE, CFG and metallic gaskets were tested. Additionally, two ASME PCC – 1 installation methods were compared and reported: Legacy Cross-Pattern Numbering System and Alternative Assembly Pattern #3. The former is the typical method for flanged joint tightening operations, while the latter offers a simpler, faster execution.


2013 ◽  
pp. 645-650
Author(s):  
Fabio R.M. Batista ◽  
Antonio J.A. Meirelles

Experimental validation of the process simulation a typical industrial bioethanol unit was conducted, comparing the obtained results with the information collected in an industrial plant. A standard solution containing water, ethanol and 17 congeners was chosen to represent the fermented must, whose composition was selected according to analyses of samples of industrial wines. A careful study of the vapour-liquid equilibrium of the wine components was performed. An attempt to optimise the industrial plant was conducted considering two optimising approaches: the central composite design (CCD) and the Sequential Quadratic Programming (SQP). The process was investigated in terms of bioethanol alcoholic graduation, ethanol recovery, energy consumption and ethanol loss. The results showed that the simulation approach was capable of correctly reproducing a real plant of bioethanol distillation and that the optimal conditions are slightly different from those used at the industrial plant investigated. Substantial fluctuations in wine composition were easily controlled for the two loop controls preventing an off-specification product. The optimised conditions indicate a distillation process able to produce bioethanol according to the legislation requirements and with appropriate steam consumption and loss of ethanol. However, for the production of alcohols with superior qualities, substantial changes in the production system may be required.


2021 ◽  
Vol 13 (6) ◽  
pp. 3246
Author(s):  
Zoe Slattery ◽  
Richard Fenner

Building on the existing literature, this study examines whether specific drivers of forest fragmentation cause particular fragmentation characteristics, and how these characteristics can be linked to their effects on forest-dwelling species. This research uses Landsat remote imaging to examine the changing patterns of forests. It focuses on areas which have undergone a high level of a specific fragmentation driver, in particular either agricultural expansion or commodity-driven deforestation. Seven municipalities in the states of Rondônia and Mato Grosso in Brazil are selected as case study areas, as these states experienced a high level of commodity-driven deforestation and agricultural expansion respectively. Land cover maps of each municipality are created using the Geographical Information System software ArcGIS Spatial Analyst extension. The resulting categorical maps are input into Fragstats fragmentation software to calculate quantifiable fragmentation metrics for each municipality. To determine the effects that these characteristics are likely to cause, this study uses a literature review to determine how species traits affect their responses to forest fragmentation. Results indicate that, in areas that underwent agricultural expansion, the remaining forest patches became more complex in shape with longer edges and lost a large amount of core area. This negatively affects species which are either highly dispersive or specialist to core forest habitat. In areas that underwent commodity-driven deforestation, it was more likely that forest patches would become less aggregated and create disjunct core areas. This negatively affects smaller, sedentary animals which do not naturally travel long distances. This study is significant in that it links individual fragmentation drivers to their landscape characteristics, and in turn uses these to predict effects on species with particular traits. This information will prove useful for forest managers, particularly in the case study municipalities examined in this study, in deciding which species require further protection measures. The methodology could be applied to other drivers of forest fragmentation such as forest fires.


Sign in / Sign up

Export Citation Format

Share Document