Investigation of single lateral mode for 852nm diode lasers with ridge waveguide design

2016 ◽  
Author(s):  
Chu Liu ◽  
Baolu Guan ◽  
Guoxin Mi ◽  
Yiru Liao ◽  
Zhenyang Liu ◽  
...  
2001 ◽  
Vol 692 ◽  
Author(s):  
C. Mermelstein ◽  
M. Rattunde ◽  
J. Schmitz ◽  
S. Simanowski ◽  
R. Kiefer ◽  
...  

AbstractIn this paper we review recent progress achieved in our development of type-I GaInAsSb/AlGaAsSb quantum-well (QW) lasers with emission wavelength in the 1.74–2.34 μm range. Triple-QW (3-QW) and single-QW (SQW) diode lasers having broadened waveguide design emitting around 2.26 μm have been studied in particular. Comparing the two designs we have find that the threshold current density at infinite cavity length as well as the transparency current density scale with the number of QWs. Maximum cw operating temperature exceeding 50°C and 90°C has been obtained for ridge waveguide lasers emitting above and below 2 μm, respectively. Ridge waveguide diode lasers emitting at 1.94 μm exhibited internal quantum efficiencies in excess of 77%, internal losses of 6 cm−1, and threshold current density at infinite cavity length as low as 121 A/cm2 reflecting the superior quality of our diode lasers, all values recorded at 280 K. A high characteristic temperature TOof 179 K for the threshold current along with a value of T1 = 433 K for the characteristic temperature of the external efficiency have been attained for the 240–280 K temperature interval. Room temperature cw output powers exceeding 1.7 W have been demonstrated for broad area single element devices with highreflection/ antireflection coated mirror facets, mounted epi-side down. The latter result is a proof for the high power capabilities of these GaSb-based mid-ir diode lasers.


1997 ◽  
Vol 33 (3) ◽  
pp. 214
Author(s):  
R. LaComb ◽  
D.K. Wagner ◽  
L. DiMarco ◽  
J. Connolly

2002 ◽  
Author(s):  
Marc T. Kelemen ◽  
Franz Rinner ◽  
Joseph Rogg ◽  
Nicolas Wiedmann ◽  
Rudolf Kiefer ◽  
...  

2003 ◽  
Author(s):  
Reuel B. Swint ◽  
Terence S. Yeoh ◽  
Victor C. Elarde ◽  
Mark S. Zediker ◽  
James J. Coleman
Keyword(s):  

2008 ◽  
Vol 20 (3) ◽  
pp. 214-216 ◽  
Author(s):  
H. Wenzel ◽  
F. Bugge ◽  
M. Dallmer ◽  
F. Dittmar ◽  
J. Fricke ◽  
...  

2011 ◽  
Vol 10 (04n05) ◽  
pp. 771-775 ◽  
Author(s):  
DIKSHA MAKWANI ◽  
R. VIJAYA

Planar and ridge waveguides are written on SU-8 thin film, coated on end polished glass substrate, by optical lithography technique at near-UV wavelengths. A significant amount of light from a diode laser at 635 nm is guided down the ridge waveguide in the experiment designed to study optical characterization. The measurement of guiding parameters such as number of modes, depth of the waveguide and refractive index are done using prism coupling technique. Simulation results on beam propagation in the SU-8 ridge waveguide (length of 2.54 cm, width of 10 μm and depth of 6 μm) show an appreciable far-field intensity profile that qualifies the waveguide design.


1996 ◽  
Vol 35 (30) ◽  
pp. 5955 ◽  
Author(s):  
Damien Stryckman ◽  
Guy Rousseau ◽  
Marc D’Auteuil ◽  
Nathalie McCarthy

2018 ◽  
Vol 1124 ◽  
pp. 041043
Author(s):  
A S Payusov ◽  
A A Serin ◽  
Yu M Shernyakov ◽  
D A Rybalko ◽  
M M Kulagina ◽  
...  
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document