Recent progress in waveguide-based on-chip particle trapping and manipulation (Conference Presentation)

Author(s):  
Holger Schmidt ◽  
Mahmud Rahman ◽  
Yucheng Li ◽  
Matthew Stott ◽  
Aaron Hawkins
2019 ◽  
Vol 137 ◽  
pp. 236-254 ◽  
Author(s):  
Nandini Dhiman ◽  
Peter Kingshott ◽  
Huseyin Sumer ◽  
Chandra S. Sharma ◽  
Subha Narayan Rath

2019 ◽  
Vol 32 (3) ◽  
pp. 1806452 ◽  
Author(s):  
Yongfa Kong ◽  
Fang Bo ◽  
Weiwei Wang ◽  
Dahuai Zheng ◽  
Hongde Liu ◽  
...  

2015 ◽  
Vol 1115 ◽  
pp. 543-548 ◽  
Author(s):  
Siti Noorjannah Ibrahim ◽  
Maan M. Alkaisi

Microelectrode geometry has significant influence on particles trapping techniques used on bioanalysis platforms. In this paper, the particle trapping patterns of dipole, quadrupole and octupole microelectrode using dielectrophoretic force (DEP) are discussed. The microelectrodes were constructed on a metal-insulator-metal platform, built on a silicon nitride (Si3N4) coated silicon substrate. The back contact is made from 20 nm nickel-chromium (NiCr) and 100 nm gold (Au) as the first layer. Then, SU-8-2005 (negative photoresist) is used on the second layer to create microcavities for trapping the particles. The third layer, where the three geometries were patterned, is made from 20 nm NiCr and 100 nm Au layers. Prior to fabrication, the particles trapping patterns of the microelectrodes were profiled using a finite element software, COMSOL 3.5a. Trapping patterns for the three geometries were evaluated using polystyrene latex microbeads. Results from the experiment validate simulation studies in term of microelectrode trapping ability up to single particle efficiency. It provides the potential of converting the trapping platform into a lab-on-chip system.


Nanophotonics ◽  
2018 ◽  
Vol 7 (9) ◽  
pp. 1533-1556 ◽  
Author(s):  
Xuewen Wang ◽  
Zhongquan Nie ◽  
Yao Liang ◽  
Jian Wang ◽  
Tao Li ◽  
...  

AbstractThis article reviews recent progress leading to the generation of optical vortex beams. After introducing the basics of optical vortex beams and their promising applications, we summarized different approaches for optical vortex generation by discrete components and laser cavities. We place particular emphasis on the recent development of vortex generation by the planar phase plates, which are able to engineer a spiral phasefront via dynamic or geometric phase in nanoscale, and highlight the independent operation of these two different phases which leads to a multifunctional optical vortex beam generation and independent spin-orbit interaction. We also introduced the recent progress on vortex lasing, including vortex beam generation from the output of bulk lasers by modification of conventional laser cavities with phase elements and from integrated on-chip microlasers. Similar approaches are also applied to generate fractional vortex beams carrying fractional topological charge. The advanced technology and approaches on design and nanofabrications enable multiple vortex beams generation from a single device via multiplexing, multicasting, and vortex array, open up opportunities for applications on data processing, information encoding/decoding, communication and parallel data processing, and micromanipulations.


2018 ◽  
Vol 29 (4) ◽  
pp. 553-563 ◽  
Author(s):  
Tingting Huang ◽  
Kai Jiang ◽  
Di Chen ◽  
Guozhen Shen
Keyword(s):  

Crystals ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 57 ◽  
Author(s):  
Lin Ren ◽  
Yunpeng Li ◽  
Na Li ◽  
Chao Chen

Particle trapping and sensing serve as important tools for non-invasive studies of individual molecule or cell in bio-photonics. For such applications, it is required that the optical power to trap and detect particles is as low as possible, since large optical power would have side effects on biological particles. In this work, we proposed to deploy a nanobeam photonic crystal cavity for particle trapping and opto-mechanical sensing. For particles captured at 300 K, the input optical power was predicted to be as low as 48.8 μW by calculating the optical force and potential of a polystyrene particle with a radius of 150 nm when the trapping cavity was set in an aqueous environment. Moreover, both the optical and mechanical frequency shifts for particles with different sizes were calculated, which can be detected and distinguished by the optomechanical coupling between the particle and the designed cavity. The relative variation of the mechanical frequency achieved approximately 400%, which indicated better particle sensing compared with the variation of the optical frequency (±0.06%). Therefore, our proposed cavity shows promising potential as functional components in future particle trapping and manipulating applications in lab-on-chip.


Sign in / Sign up

Export Citation Format

Share Document