Study on improving the dynamic range of demodulation signals in fiber Bragg grating sensing system using digital matched filter

Author(s):  
Zhiquan Li ◽  
Mingyan Xu ◽  
Ying Chen
Photonics ◽  
2021 ◽  
Vol 8 (6) ◽  
pp. 214
Author(s):  
Siming Weng ◽  
Pei Yuan ◽  
Wei Zhuang ◽  
Dongliang Zhang ◽  
Fei Luo ◽  
...  

For the development of minimized and high-rate photonic-integrated fiber Bragg grating interrogation (FBGI) systems, arrayed waveguide grating (AWG) has been widely used as one of the critical components. In this paper, we present an 8-channel SOI-based AWG for a photonic integrated FBG interrogation microsystem. The channel spacing of the AWG is designed to be 3 nm to meet a high-dynamic-range demodulation requirement. The core size of the fabricated AWG is about 335 × 335 μm2. The simulation results and experimental results are in high agreement, showing that AWG has a fine transmission spectrum with crosstalk below −16 dB, nonuniformity below 0.4 dB, insertion loss below −6.35 dB, 3 dB bandwidth about 1.3 nm and 10 dB bandwidth of 2.3 nm. The proposed AWG can be applied perfectly to the SOI-based AWG demodulation microsystem, exhibiting a large dynamic range of 1.2 nm, the resolution for measurements is 1.27 pm and a high accuracy of 20.6 pm.


2020 ◽  
Vol 18 (12) ◽  
pp. 889-893
Author(s):  
Kalyan Biswas

In this work, a simple but versatile sensing system for very accurate sensing of liquid level and liquid density is presented. The sensor works based on basic strain sensitivity of Fiber Bragg Grating (FBG) and principle of liquid obeying Archimedes’ law of buoyancy. In this system, a cylindrical shaped mass suspended from a Fiber Bragg Grating and partially immersed in the liquid to be sensed. If the liquid level in the container or liquid density varies, that change the up thrust on the suspended mass and load on the Fiber will be changed accordingly. The change in the load on Fiber changes strain on the FBG and the reflected Bragg wavelength also changes. The proposed device with proper calibration should be able to carry out real time and nonstop liquid level and liquid density measurements. A mathematical analysis of the system considering liquid properties and geometrical structure of the suspended mass is presented here. Sensitivity of the system for liquid level monitoring is also reported. Achieved results shows the path for the utilization of the proposed sensor system for precise liquid density measurement and liquid level sensing in very large storage tanks used for commercial/residential applications.


2018 ◽  
Vol 38 (3) ◽  
pp. 0328014
Author(s):  
郑狄 Zheng Di ◽  
潘炜 Pan Wei ◽  
Sales Salvador Sales Salvador

Sign in / Sign up

Export Citation Format

Share Document