On the Time Evolution of the Surface Shape of a Charged Viscous Liquid Drop Deformed at Zero Time

2005 ◽  
Vol 50 (1) ◽  
pp. 19 ◽  
Author(s):  
A. N. Zharov
1992 ◽  
Vol 241 ◽  
pp. 169-198 ◽  
Author(s):  
Osman A. Basaran

A fundamental understanding of nonlinear oscillations of a viscous liquid drop is needed in diverse areas of science and technology. In this paper, the moderate- to large-amplitude axisymmetric oscillations of a viscous liquid drop, which is immersed in dynamically inactive surroundings, are analysed by solving the free boundary problem comprised of the Navier–Stokes system and appropriate interfacial conditions at the drop–ambient fluid interface. The means are the Galerkin/finite-element technique, an implicit predictor-corrector method, and Newton's method for solving the resulting system of nonlinear algebraic equations. Attention is focused here on oscillations of drops that are released from an initial static deformation. Two dimensionless groups govern such nonlinear oscillations: a Reynolds number, Re, and some measure of the initial drop deformation. Accuracy is attested by demonstrating that (i) the drop volume remains virtually constant, (ii) dynamic response to small-and moderate-amplitude disturbances agrees with linear and perturbation theories, and (iii) large-amplitude oscillations compare well with the few published predictions made with the marker-and-cell method and experiments. The new results show that viscous drops that are released from an initially two-lobed configuration spend less time in prolate form than inviscid drops, in agreement with experiments. Moreover, the frequency of oscillation of viscous drops released from such initially two-lobed configurations decreases with the square of the initial amplitude of deformation as Re gets large for moderate-amplitude oscillations, but the change becomes less dramatic as Re falls and/or the initial amplitude of deformation rises. The rate at which these oscillations are damped during the first period rises as initial drop deformation increases; thereafter the damping rate is lower but remains virtually time-independent regardless of Re or the initial amplitude of deformation. The new results also show that finite viscosity has a much bigger effect on mode coupling phenomena and, in particular, on resonant mode interactions than might be anticipated based on results of computations incorporating only an infinitesimal amount of viscosity.


2010 ◽  
Vol 104 (3) ◽  
Author(s):  
Robert D. Schroll ◽  
Christophe Josserand ◽  
Stéphane Zaleski ◽  
Wendy W. Zhang
Keyword(s):  

2008 ◽  
Vol 60 (6) ◽  
pp. 661-679 ◽  
Author(s):  
Kou Yamada ◽  
Hiroyuki Emori ◽  
Kiyoshi Nakazawa

2017 ◽  
Vol 2 (11) ◽  
Author(s):  
Neha Gawande ◽  
Y. S. Mayya ◽  
Rochish Thaokar

2011 ◽  
Vol 299-300 ◽  
pp. 287-291 ◽  
Author(s):  
Jian Guo He ◽  
Guo Wei Chang ◽  
Shu Ying Chen ◽  
Xiao Lin Qiu

The carbon steel samples of great quality can not be melted using a high-temperature confocal scanning laser microscopy(HTCSLM). On account of only arc surface of the tiny liquid-drop top is observed, it is difficult to obtain distinct images. The shape variation of the tiny liquid-drop is studied experimentally in this article. The results show that the shape of the liquid-drop will be changed at 1600°C, when the carbon steel sample of 0.5g is laid on the Al2O3sloping of 15 degrees. Though the radius of curvature of the liquid-drop top surface is obviously enlarged, the impact of improving the surface shape of liquid-drop through the gravity flow of tiny liquid-drop is finite. For the carbon steel sample of less than 0.8g, the hanging drop is automatically formed in the melting process under the condition that the gap between the solid sample and Al2O3single crystal plate is 0.3mm, and the shape retains invariant when it is hold for 20 min at 1600°C. The contact surface between the sample and Al2O3single crystal plate is 24mm2.


Sign in / Sign up

Export Citation Format

Share Document