Individual rate constants of methyl radical reactions in the pyrolysis of dimethyl ether

1977 ◽  
Vol 55 (23) ◽  
pp. 4128-4134 ◽  
Author(s):  
Andrew M. Held ◽  
Kim C. Manthorne ◽  
Philip D. Pacey ◽  
Howard P. Reinholdt

Dimethyl ether was pyrolyzed in a flow system at 10 to 80 Torr and 1005 K. The average concentration of CH3 radicals in the reactor was measured by ultraviolet absorption spectroscopy. Product yields were measured by gas chromatography. The system was simulated using a computer program, taking into account the warm-up of the entering gas and the occurrence of secondary reactions. Rate constants were varied to find values consistent with experimental observations. The limiting, high pressure rate constant for the recombination of CH3 was estimated to be 1010.5 ± 0.5ℓ mol−1 s−1. Estimated rate constants for the reactions[Formula: see text]were 107.12 ± 0.2ℓ mol−1 s−1 and 107.5 ± 0.4ℓ mol−1 s−1, respectively.

A reaction scheme analogous to that used for the higher paraffins (Blackmore & Hinshelwood 1962 b ) is tested for its applicability to the thermal decomposition of ethane and its inhibition by nitric oxide. Ethane constitutes a limiting case for the paraffin series, in that Hatomsre ­place methyl radicals as chain-carrying species. The individual rate constants of the reaction steps are estimated on the basis of this scheme, and will all conform satisfactorily to the general pattern of variation in the homologous series, allowance being made for the discontinuous increase expected when an H atom appears instead of a methyl radical.


1986 ◽  
Vol 64 (11) ◽  
pp. 2192-2195 ◽  
Author(s):  
William E. Jones ◽  
Joseph L. Ma

The absolute rate constants for the reaction of H atoms with methyl- and vinyl-halides have been determined using esr spectroscopy and a conventional gas flow system. The rate constants determined at 298 ± 2 K at a pressure of 0.55 Torr are methane, (1.7 ± 0.3) × 10−17; ethane, (2.3 ± 0.5) × 10−17; methylfluoride, (4 ± 3) × 10−15; methylchloride, (8 ± 2) × 10−16; methylbromide, (2.1 ± 0.6) × 10−14; vinylfluoride, (1.47 ± 0.02) × 10−13; vinylchloride, (1.66 ± 0.08) × 10−13; and vinylbromide (4.07 ± 0.73) × 10−13 in units of cm3 molecule−1 s−1.


1967 ◽  
Vol 45 (22) ◽  
pp. 2763-2766 ◽  
Author(s):  
L. F Loucks ◽  
K. J Laidler

The mercury-photosensitized decomposition of dimethyl ether was investigated from 200 to 300 °C and over the pressure range 3 to 600 mm Hg. Measurements were made of the initial rates of formation of the products of reaction, which are CO, H2, C2H6, CH4, CH3OC2H5, and CH3OCH2CH2OCH3. It is concluded that the primary step involves a C—H split; there is no evidence for a primary C—O split. Over the range 200 to 300 °C the methoxymethyl radical, CH3OCH2, decomposed to give formaldehyde and a methyl radical, whereas at 30 °C no decomposition of the CH3OCH2 radical was detected. The mass balance is consistent with the mechanism proposed. The homogeneity of the reaction conditions was examined by varying the concentration of mercury in the reaction vessel.


2003 ◽  
Vol 68 (2) ◽  
pp. 77-84 ◽  
Author(s):  
Vladimir Leskovac ◽  
Svetlana Trivic ◽  
Draginja Pericin

In this work, all the rate constants in the kinetic mechanism of the yeast alcohol dehydrogenase-catalyzed oxidation of ethanol by NAD+, at pH 7.0, 25 ?C, have been estimated. The determination of the individual rate constants was achieved by fitting the reaction progress curves to the experimental data, using the procedures of the FITSIM and KINSIM software package of Carl Frieden. This work is the first report in the literature showing the internal equilibrium constants for the isomerization of the enzyme-NAD+ complex in yeast alcohol dehydrogenase-catalyzed reactions.


Sign in / Sign up

Export Citation Format

Share Document