scholarly journals Scalar Method of Fault Diagnosis of Inertial Measurement Unit

2015 ◽  
Vol 2015 ◽  
pp. 1-10
Author(s):  
Vadym Avrutov
Keyword(s):  
Fault Diagnosis ◽  
Inertial Measurement Unit ◽  
Calibration Method ◽  
Quality Monitoring ◽  
Measurement Unit ◽  
Navigation Systems ◽  
Working Capacity ◽  
Element Determination ◽  
Inertial Measurement ◽  
Algorithm Verification

The scalar method of fault diagnosis systems of the inertial measurement unit (IMU) is described. All inertial navigation systems consist of such IMU. The scalar calibration method is a base of the scalar method for quality monitoring and diagnostics. In accordance with scalar calibration method algorithms of fault diagnosis systems are developed. As a result of quality monitoring algorithm verification is implemented in the working capacity monitoring of IMU. A failure element determination is based on diagnostics algorithm verification and after that the reason for such failure is cleared. The process of verifications consists of comparison of the calculated estimations of biases, scale factor errors, and misalignments angles of sensors to their data sheet certificate, kept in internal memory of computer. As a result of such comparison the conclusion for working capacity of each IMU sensor can be made and also the failure sensor can be determined.

Systematic Calibration Method for FOG Inertial Measurement Units

2013 ◽  
Vol 662 ◽  
pp. 717-720 ◽  
Author(s):  
Zhen Yu Zheng ◽  
Yan Bin Gao ◽  
Kun Peng He
Keyword(s):  
Inertial Measurement Unit ◽  
Inertial Sensors ◽  
Calibration Method ◽  
State Equation ◽  
Measurement Unit ◽  
Observation System ◽  
Body Frame ◽  
Inertial Measurement ◽  
Measurement Units ◽  
Error Coefficients

As an inertial sensors assembly, the FOG inertial measurement unit (FIMU) must be calibrated before being used. The paper presents a one-time systematic IMU calibration method only using two-axis low precision turntable. First, the detail error model of inertial sensors using defined body frame is established. Then, only velocity taken as observation, system 33 state equation is established including the lever arm effects and nonlinear terms of scale factor error. The turntable experiments verify that the method can identify all the error coefficients of FIMU on low-precision two-axis turntable, after calibration the accuracy of navigation is improved.

Research on Automatic Joint Calibration Method of Multi 3D-LIDARs and Inertial Measurement Unit

2021 ◽  
Author(s):  
Jinghua Zhang ◽  
Rui He ◽  
Jian Wu ◽  
Shuai Li ◽  
Xuesong Chen ◽  
...  
Keyword(s):  
Inertial Measurement Unit ◽  
Calibration Method ◽  
Measurement Unit ◽  
Inertial Measurement

scholarly journals Aircraft Inertial Measurement Unit Fault Diagnosis Based on Optimal Two-Stage UKF

2018 ◽  
Vol 36 (5) ◽  
pp. 933-941
Author(s):  
Qizhi He ◽  
Weiguo Zhang ◽  
Degang Huang ◽  
Huakun Chen ◽  
Jinglong Liu
Keyword(s):  
Kalman Filter ◽  
Fault Diagnosis ◽  
Nonlinear System ◽  
Inertial Measurement Unit ◽  
Unscented Kalman Filter ◽  
Optimal Estimation ◽  
Measurement Unit ◽  
Two Stage ◽  
Inertial Measurement ◽  
System States

Optimal two stage Kalman filter (OTSKF) is able to obtain optimal estimation of system states and bias for linear system which contains random bias. Unscented Kalman filter (UKF) is a conventional nonlinear filtering method which utilizes Sigmas point sampling and unscented transformation technology realizes propagation of state means and covariances through nonlinear system. Aircraft is a typical complicate nonlinear system, this paper treats the faults of Inertial Measurement Unit (IMU) as random bias, established a filtering model which contains faults of IMU. Hybird the two stage filtering technique and UKF, this paper proposed an optimal two stage unscented Kalman filter (OTSUKF) algorithm which is suitable for fault diagnosis of IMU, realized optimal estimation of system states and faults identification of IMU via proposed innovative designing method of filtering model and the algorithm was validated that it is robust to wind disterbance via real flight data and it is also validated that proposed OTSUKF is optimal in the existance of wind disturbance via comparing with the existance iterated optimal two stage extended kalman filter (IOTSEKF) method.

scholarly journals Aircraft Inertial Measurement Unit Fault Diagnosis Based on Adaptive Two-Stage UKF

2020 ◽  
Vol 38 (4) ◽  
pp. 806-813
Author(s):  
Qizhi He ◽  
Weiguo Zhang ◽  
Xiaoxiong Liu ◽  
Weinan Li
Keyword(s):  
Kalman Filter ◽  
Random Walk ◽  
Fault Diagnosis ◽  
Inertial Measurement Unit ◽  
Unscented Kalman Filter ◽  
Random Walk Model ◽  
Measurement Unit ◽  
Actual Situation ◽  
Two Stage ◽  
Inertial Measurement

In the case of nonlinear systems with random bias, the Optimal Two-Stage Unscented Kalman Filter (OTSUKF) can obtain the optimal estimation of system state and bias. But it requires random bias to be accurately modeled, while it is always very difficult in actual situation because the aircraft is a typical nonlinear system. In this paper, the faults of the Inertial Measurement Unit (IMU) are treated as a random bias, and the random walk model is used to describe the fault. The accuracy of the random walk model depends on the degree of matching between the covariance of the random walk model and the actual situation. For the IMU fault diagnosis method based on OTSUKF, the covariance of the random walk model is assigned with a constant matrix, and the value of the matrix is initialized empirically. It is very difficult to select a matching matrix in practical applications. For this problem, in this paper, the covariance matrix of the random walk model is adaptively adjusted online based on the innovation covariance matching technique, and an adaptive Two-Stage Unscented Kalman Filter (ATSUKF) is proposed to solve the fault diagnosis problem of the IMU. The simulation experiment compares the IMU fault diagnosis performance of OTSUKF and ATSUKF, and verifies the effectiveness of the proposed adaptive method.

A Rapid Field Calibrating Method for MIMU

2011 ◽  
Vol 80-81 ◽  
pp. 1140-1144
Author(s):  
Yu Bao Fan ◽  
Jie Li ◽  
Bo Wang ◽  
Xiao Chun Tian ◽  
Jun Liu
Keyword(s):  
Inertial Measurement Unit ◽  
Operation Time ◽  
Calibration Method ◽  
Least Square ◽  
Measurement Unit ◽  
Calibration Model ◽  
Time Saving ◽  
Inertial Measurement ◽  
Field Calibration ◽  
Calibration Program

When the Micro Inertial Measurement Unit is been placed randomly in the case of stationary, the sum vectors that measured by the inertial devices configured orthogonally along three axis, are constant vectors. In view of the above objective facts, a field calibration method of micro inertial measurement unit was proposed. On the base of the establishment and optimization of calibration model, all parameters to be calibrated can be obtained through the least square by the ellipsoid fitting, with the result of high-precision field calibration for micro inertial measurement unit. Finally, a filed calibration program for micro inertial measurement unit is scheduled reasonably. The experiment results show that the method has such characteristics such as easily-operation, time-saving, higher calibration accuracy, and not depending on the baseline direction and datum offered by precision instruments. Especially, it fits for inertial measurement systems which work short time and ask for high accuracy. In addition, it can also significantly increase the measurement accuracy of micro inertial measurement system in practical application.

scholarly journals Rigorous Boresight Self-Calibration of Mobile and UAV LiDAR Scanning Systems by Strip Adjustment

2019 ◽  
Vol 11 (4) ◽  
pp. 442 ◽  
Author(s):  
Zhen Li ◽  
Junxiang Tan ◽  
Hua Liu
Keyword(s):  
Inertial Measurement Unit ◽  
Point Clouds ◽  
Calibration Method ◽  
Satellite System ◽  
Measurement Unit ◽  
Inertial Measurement ◽  
Self Calibration ◽  
Global Navigation Satellite ◽  
Mean Square Errors ◽  
Scanning Systems

Mobile LiDAR Scanning (MLS) systems and UAV LiDAR Scanning (ULS) systems equipped with precise Global Navigation Satellite System (GNSS)/Inertial Measurement Unit (IMU) positioning units and LiDAR sensors are used at an increasing rate for the acquisition of high density and high accuracy point clouds because of their safety and efficiency. Without careful calibration of the boresight angles of the MLS systems and ULS systems, the accuracy of data acquired would degrade severely. This paper proposes an automatic boresight self-calibration method for the MLS systems and ULS systems using acquired multi-strip point clouds. The boresight angles of MLS systems and ULS systems are expressed in the direct geo-referencing equation and corrected by minimizing the misalignments between points scanned from different directions and different strips. Two datasets scanned by MLS systems and two datasets scanned by ULS systems were used to verify the proposed boresight calibration method. The experimental results show that the root mean square errors (RMSE) of misalignments between point correspondences of the four datasets after boresight calibration are 2.1 cm, 3.4 cm, 5.4 cm, and 6.1 cm, respectively, which are reduced by 59.6%, 75.4%, 78.0%, and 94.8% compared with those before boresight calibration.

Global Observability Analysis IMU/Camera Integration

2013 ◽  
Vol 380-384 ◽  
pp. 1069-1072
Author(s):  
Qiang Fang ◽  
Xin Sheng Huang
Keyword(s):  
State Estimation ◽  
Inertial Measurement Unit ◽  
Sufficient Conditions ◽  
Inertial Navigation ◽  
Measurement Unit ◽  
Navigation Systems ◽  
Inertial Navigation Systems ◽  
Inertial Measurement ◽  
Observability Analysis ◽  
Inertial Measurements

Vision-aided inertial navigation systems can provide precise state estimates for the 3-D motion of a vehicle. This is achieved by combining inertial measurements from an inertial measurement unit (IMU) with visual observations from a camera. Observability is a key aspect of the state estimation problem of INS/Camera. In most previous research, conservative observability concepts based on Lie derivatives have extensively been used to characterize the estimability properties. In this paper, we present a novel approache to investigate the observability of INS/Camera: global observability. The global observability method directly starts from the basic observability definition. The global observability analysis approach is not only straightforward and comprehensive but also provides us with new insights compared with conventional methods. Some sufficient conditions for the global observability of the system is provided.

The Analysis on the Annual Change of Digital Aerial Camera's IMUs Boresight Misalignment

2021 ◽  
Vol 87 (11) ◽  
pp. 801-806
Author(s):  
Abdullah Kayı ◽  
Bülent Bayram ◽  
Dursun Zafer Şeker
Keyword(s):  
Inertial Measurement Unit ◽  
Measurement Unit ◽  
Navigation Systems ◽  
Annual Change ◽  
Short Term ◽  
Inertial Measurement ◽  
Term Stability ◽  
Long Term Stability ◽  
Flight Season

The system calibration determines the position and orientation between the sensor and the navigation systems, such as boresight misalignment. Although there is much research about boresight calibration, there are not sufficient studies on the frequency of the calibration performance. The short-term stability of boresight misalignment was investigated in previous studies, but long-term stability research could not be done. It is important to emphasize that long-term stability is still open to questions. In this study, an Ultracam Eagle digital aerial camera's data from 2012 to 2016 were analyzed and the question of how often calibration should be performed was investigated. Boresight misalignment does not remain constant on a yearly basis and should be calibrated every year before the flight season. It was observed that the boresight misalignment changed dramatically when the inertial measurement unit or camera was removed from the aircraft and sent to the manufacturer for factory calibration.

Sign in / Sign up

Export Citation Format

Share Document