scholarly journals Study of Model Predictive Control for Path-Following Autonomous Ground Vehicle Control under Crosswind Effect

2016 ◽  
Vol 2016 ◽  
pp. 1-18 ◽  
Author(s):  
Fitri Yakub ◽  
Aminudin Abu ◽  
Shamsul Sarip ◽  
Yasuchika Mori

We present a comparative study of model predictive control approaches of two-wheel steering, four-wheel steering, and a combination of two-wheel steering with direct yaw moment control manoeuvres for path-following control in autonomous car vehicle dynamics systems. Single-track mode, based on a linearized vehicle and tire model, is used. Based on a given trajectory, we drove the vehicle at low and high forward speeds and on low and high road friction surfaces for a double-lane change scenario in order to follow the desired trajectory as close as possible while rejecting the effects of wind gusts. We compared the controller based on both simple and complex bicycle models without and with the roll vehicle dynamics for different types of model predictive control manoeuvres. The simulation result showed that the model predictive control gave a better performance in terms of robustness for both forward speeds and road surface variation in autonomous path-following control. It also demonstrated that model predictive control is useful to maintain vehicle stability along the desired path and has an ability to eliminate the crosswind effect.

Author(s):  
Jiaxing Yu ◽  
Xiaofei Pei ◽  
Xuexun Guo ◽  
JianGuo Lin ◽  
Maolin Zhu

This paper proposes a framework for path tracking under additive disturbance when a vehicle travels at high speed or on low-friction road. A decoupling control strategy is adopted, which is made up of robust model predictive control and the stability control combining preview G-vectoring control and direct yaw moment control. A vehicle-road model is adopted for robust model predictive control, and a robust positively invariant set calculated online ensures state constraints in the presence of disturbances. Preview G-vectoring control in stability control generates deceleration and acceleration based on lateral jerk, later acceleration, and curvature at preview point when a vehicle travels through a cornering. Direct yaw moment control with additional activating conditions provides an external yaw moment to stabilize lateral motion and enhances tracking performance. A comparative analysis of stability performance of stability control is presented in simulations, and furthermore, many disturbances are considered, such as varying wind, road friction, and bounded state disturbances from motion planning and decision making. Simulation results show that the stability control combining preview G-vectoring control and direct yaw moment control with additional activating conditions not only guarantees lateral stability but also improves tracking performance, and robust model predictive control endows the overall control system with robustness.


Author(s):  
Mohammad Ghassem Farajzadeh-Devin ◽  
Seyed Kamal Hosseini Sani

In this paper, output tracking of a geometric path for a nonlinear uncertain system with input and state constraints is considered. We propose an enhanced two-loop model predictive control approach for output tracking of a nonlinear uncertain system. Additionally, we propose an optimal version of output path following control problem to improve the controller synthesis. Satisfaction of the dynamical constraints of a system such as velocity, acceleration and jerk limitations is added to the problem introducing a new augmented system. The recursive feasibility of the proposed method is demonstrated, and its robust stability is guaranteed such that relaxation on the terminal constraint and penalty are achieved. To validate the theoretical benefits of the proposed controller, it is simulated on a SCARA robot manipulator and the results are compared with a two-loop model predictive controller successfully.


Author(s):  
Xiaofei Wang ◽  
Zaojian Zou ◽  
Tieshan Li ◽  
Weilin Luo

The control problem of underactuated surface ships and underwater vehicles has attracted more and more attentions during the last years. Path following control aims at forcing the vehicles to converge and follow a desired path. Path following control of underactuated surface ships or underwater vehicles is an important issue to study nonlinear systems control, and it is also important in the practical implementation such as the guidance and control of marine vehicles. This paper proposes two nonlinear model predictive control algorithms to force an underactuated ship to follow a predefined path. One algorithm is based on state space model, the other is based on analytic model predictive control. In the first algorithm, the state space GPC (Generalized Predictive Control) method is used to design the path-following controller of underactuated ships. The nonlinear path following system of underactuated ships is discretized and re-arranged into state space model. Then states are augmented to get the new state space model with control increment as input. Thus the problem is becoming a typical state space GPC problem. Some characters of GPC such as cost function, receding optimization, prediction horizon and control horizon occur in the design procedure of path-following controller. The control law is derived in the form of control increment. In the second algorithm, an analytic model predictive control algorithm is used to study the path following problem of underactuated ships. In this path-following algorithm, the output-redefinition combined heading angle and cross-track error is introduced. As a result, the original single-input multiple-output (SIMO) system is transformed into an equivalent single-input single-output (SISO) system. For the transformed system, we use the analytic model predictive control method to get path-following control law in the analytical form. The analytic model predictive controller can be regarded as special feedback linearization method optimized by predictive control method. It provides a systematic method to compute control parameters rather than by try-and-error method which is often used in the exact feedback linearization control. Relative to GPC, the analytic model predictive control method provides an analytic optimal solution and decreases the computational burden, and the stability of closed-loop system is guaranteed. The path-following system of underactuated ships is guaranteed to follow and stabilize onto the desired path. Numerical simulations demonstrate the validity of the proposed control laws.


Author(s):  
Nicola De Val ◽  
Andrea Fuso ◽  
Francesco Braghin ◽  
Edoardo Sabbioni

The developed Active Front Steering (AFS) Linear Time Variant (LTV) Model Predictive Control (MPC) is a linear model predictive control based on linearization of the nonlinear vehicle model. A sensitivity analysis of the parameters of the controller is carried out on a simple path following test. Once the optimal parameters are found, both in terms of trajectory following and real-time performances, the LTV-MPC is used for determining the requirements for the necessary sensors (in terms of minimum obstacle distance detection) as a function of the vehicle speed. Then, the same analysis is carried out considering wet road conditions (i.e. the tyre-road friction coefficient is different from that accounted for by the controller).


Sign in / Sign up

Export Citation Format

Share Document