scholarly journals A Parasitic Array Receiver for ISAR Imaging of Ship Targets Using a Coastal Radar

2016 ◽  
Vol 2016 ◽  
pp. 1-11 ◽  
Author(s):  
Fabrizio Santi ◽  
Debora Pastina

The detection and identification of ship targets navigating in coastal areas are essential in order to prevent maritime accidents and to take countermeasures against illegal activities. Usually, coastal radar systems are employed for the detection of vessels, whereas noncooperative ship targets as well as ships not equipped with AIS transponders can be identified by means of dedicated active radar imaging system by means of ISAR processing. In this work, we define a parasitic array receiver for ISAR imaging purposes based on the signal transmitted by an opportunistic coastal radar over its successive scans. In order to obtain the proper cross-range resolution, the physical aperture provided by the array is combined with the synthetic aperture provided by the target motion. By properly designing the array of passive devices, the system is able to correctly observe the signal reflected from the ships over successive scans of the coastal radar. Specifically, the upper bounded interelement spacing provides a correct angular sampling accordingly to the Nyquist theorem and the lower bounded number of elements of the array ensures the continuity of the observation during multiple scans. Anad hocfocusing technique has been then proposed to provide the ISAR images of the ships. Simulated analysis proved the effectiveness of the proposed system to provide top-view images of ship targets suitable for ATR procedures.

Author(s):  
С.А. Королев ◽  
А.В. Горюнов ◽  
В.В. Паршин

A new approach to the creation of millimeter-wave radio imaging systems is proposed. This approach is based on the use of an array receiver consisting of a densely packed (pixel size - 4 mm) array of planar mixers located in the focal plane of a quasi-optical objective, with application of the frequency-modulated continuous-wave radar technique. It has been demonstrated that the implementation of the heterodyne type of reception makes it possible to increase the distance range of the array radio imaging system up to ~ 100 m while maintaining the angular resolution at the previous level.


Author(s):  
Baofeng Guo ◽  
Ning Han ◽  
Lin Shi ◽  
Huiyan Zeng ◽  
Guanjun Chen ◽  
...  

2018 ◽  
Vol 214 ◽  
pp. 02004
Author(s):  
Yuanyuan Li ◽  
Yaowen Fu ◽  
Wenpeng Zhang

Distributed ISAR technique has the potential to increase the cross-range resolution by exploiting multi-channel echoes from distributed virtual equivalent sensors. In the existing imaging approaches, the echoes acquired from different sensors are rearranged into an equivalent single-channel ISAR signal. Then, the missing data between the observation angles of any two adjacent sensors is restored by interpolation. However, the interpolation method can be very inaccurate when the gap is large or the signal-to-noise (SNR) of echoes is low. In this paper, we discuss sparse representation of distributed ISAR echoes since the scattering field of the target is usually composed of only a limited number of strong scattering centres, representing strong spatial sparsity. Then, by using sparse algorithm (Orthogonal Matching Pursuit algorithm, OMP), the positions and amplitudes of the scattering points in every range bin can be recovered and the final ISAR image with high cross-range resolution can be obtained. Results show the effectiveness of the proposed method.


2018 ◽  
Vol 26 (2) ◽  
pp. 1978 ◽  
Author(s):  
Shaowen Peng ◽  
Shangyuan Li ◽  
Xiaoxiao Xue ◽  
Xuedi Xiao ◽  
Dexin Wu ◽  
...  

Author(s):  
Muchammad Soleh ◽  
Rahmat Arief

LAPAN plans to conduct a flight test of LSA (LAPAN Surveillance Aircraft). LSA STEMME-S15 is capable of carrying sensor payloads up to 160 kg that are mounted on both sides of the wings with altitude between 400-2000 m. LSA can be designed to perform imaging by using optical sensors and SAR (Synthetic Aperture Radar). Compared to imaging using optical sensors, SAR sensor has advantages such as it can operate all day and night, able to penetrate clouds, and able to see objects from side looking, while optical sensors generally see the object perpendicular to the ground. Therefore the use of SAR imaging technology can complement optical imaging technology. To design SAR system imagers on LSA, it is necessary to simulate the primary parameters SAR i.e. altitude and look angle of sensor, speed of LSA, SAR frequency and signals power shot to object to calculate the resolution of azimuth and ground range values that can be obtained. This SAR parameters simulation used MATLAB which have been designed with two approaches; the first approach where the SAR sensor is ideal and in which all the fundamental parameters (such as polarization, frequency, etc.) are used to generate the desired sensitivity and resolution of azimuth and ground range, and the second approach is where SAR sensor is designed in a limited antenna size (constraint case), with the assumption that the dimensions of the antenna and the average available power are fixed. The data used in this simulation is a pseudo-data obtained from LSA technical spesification and SAR sensor. The simulation results with the first approach shows that if LSA is flying at an altitude of 1000 m, with speed of 36.11 m/s, and SAR frequency of 5.3 GHz, then to get resolution of azimuth, slant range and ground range of 1 m, 1.2 m and 3 m, it is necessary to design the length and width of SAR antenna at 2 m and 13.5 cm, with look angle of 23.5 degrees. While the result of second approach simulation is that if LSA is flying on the same altitude and speed, on the same look angle and SAR frequency, with a particular design of antenna length and width of 2 m and 13.5 cm, then azimuth, slant range and ground range resolution of 1 m, 1.87 and 4.79 m will be obtained. Form both simulations, it can be concluded that limited SAR system on LSA, especially on the technical aspects of mounting and space as in the simulation with the second approach, will produce slightly lower slant range and ground range resolution when compared with SAR system in the first simulation. This shows that space limitation on LSA will affect decrease the value of spatial ground range resolution. The simulation results are expected to be inputs on designing SAR imaging system on LSA.


2017 ◽  
Vol 11 (2) ◽  
pp. 379-385 ◽  
Author(s):  
Di Xiong ◽  
Xiongkui Zhang ◽  
Junling Wang ◽  
Huipeng Zhao ◽  
Meiguo Gao
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document