scholarly journals Immediate Implant Placement by Interradicular Bone Drilling before Molar Extraction: Clinical Case Report with One-Year Follow-Up

2018 ◽  
Vol 2018 ◽  
pp. 1-5 ◽  
Author(s):  
Stuardo Valenzuela ◽  
José M. Olivares ◽  
Nicolás Weiss ◽  
Dafna Benadof
Keyword(s):  
Survival Rates ◽  
Three Dimensional ◽  
Primary Stability ◽  
Bone Drilling ◽  
Implant Placement ◽  
Immediate Implants ◽  
Immediate Implant ◽  
One Year ◽  
Molar Extraction

The placement of immediate implants in the posterior sector is a widespread procedure where the success and survival rates are similar to those of traditional protocols. It has several anatomical challenges, such as the presence of interradicular bone septa that hinder a correct three-dimensional positioning of the implant and may compromise primary stability and/or cause damage of neighboring structures. The aim of this article is to present the treatment and the one-year clinical follow-up of a patient who received immediate implant placement using an interradicular bone-drilling technique before the molar extraction.

Implant Bone Rings. One-Stage Three-Dimensional Bone Transplant Technique: A Case Report

2010 ◽  
Vol 36 (1) ◽  
pp. 69-74 ◽  
Author(s):  
Mark R. Stevens ◽  
Hany A. Emam ◽  
Mahmoud E. L. Alaily ◽  
Mohamed Sharawy
Keyword(s):  
Alveolar Bone ◽  
Three Dimensional ◽  
Primary Stability ◽  
Surgical Approaches ◽  
Socket Preservation ◽  
Implant Placement ◽  
Basal Bone ◽  
Augmentation Techniques ◽  
Immediate Implant ◽  
Teeth Extraction

Abstract A variety of techniques and materials has been used to provide the structural base of bone and soft tissue support for dental implants. Alveolar bone augmentation techniques include different surgical approaches such as guided bone regeneration, onlay grafting, interpositional grafting, distraction osteogenesis, ridge splitting, and socket preservation. In the case presented, a technique was used to augment the alveolar bone three-dimensionally with autologous “bone rings” and immediate implant placement in a 1-stage procedure following teeth extraction. Bone rings (circular osteotomies) were outlined at the symphysis area using trephine burs, and a central osteotomy for implant placement was done before its removal. The rings were then removed and sculptured to fit the extraction socket; this was followed by screwing the implant through the ring, gaining its primary stability from the prepared basal bone.

scholarly journals Five-Year Follow-up of an Immediate Implant Placement in the Aesthetic Zone

2018 ◽  
Vol 2 (2) ◽  
pp. 76-79
Author(s):  
Bhageshwar Dhami ◽  
Priti Shrestha
Keyword(s):  
Alveolar Bone ◽  
Treatment Time ◽  
Maxillary Central Incisor ◽  
Implant Placement ◽  
Surgical Extraction ◽  
Immediate Implants ◽  
Tissue Changes ◽  
Immediate Implant ◽  
The Aesthetic

Immediate implants are placed in the site of surgical extraction of the tooth to be replaced. The percentage success of such procedures varies among authors from 94-100%. Immediate implant placement is most commonly indicated when tooth extraction is done with pathologies not amenable to treatment. The advantages include reduced post-extraction alveolar bone resorption, shortened treatment time, and the avoidance of a second surgical intervention with regard to delayed implantation. This report describes a case of immediate implant placed in a maxillary central incisor followed by evaluation of soft and hard tissue changes occurring during post-operative period with a follow-up at five years.

scholarly journals Immediate Dental Implant Placements Using Osteotome Technique: A Case Report and Literature Review

2016 ◽  
Vol 10 (1) ◽  
pp. 367-374 ◽  
Author(s):  
Saad Al-Almaie
Keyword(s):  
Dental Implant ◽  
Treatment Time ◽  
Wound Dehiscence ◽  
Surgical Trauma ◽  
Implant Placement ◽  
Bone Expansion ◽  
Immediate Implant ◽  
One Year ◽  
Functional Loading

This clinical case describes the effect of the osteotome technique on the osseointegration of a mandibular dental implant in a 42-year-old female patient with dento-alveolar bony defects and to review the literature regarding immediate implant placement using osteotome technique. The amount of bone expansion at the alveolar ridge and the marginal bone resorption from the time of implant placement to one year after the implant’s functional loading were recorded clinically. The esthetic outcome for the restored implant (the gingival margin) was achieved one years after the implant’s functional loading. The surgical and prosthetic sites for the implant showed no postoperative complications, and no infection or wound dehiscence was recorded during the follow-up period. The osteotome technique is good for the purpose for which it was introduced, and its advantages with immediate implant placement include reduced surgical trauma and a shorter treatment time.

scholarly journals Horizontal Bone Augmentation and Simultaneous Implant Placement using Xenogeneic Bone Rings Technique: A Retrospective Clinical Study

2020 ◽  
Author(s):  
Yude Ding ◽  
LianFei Wang ◽  
Kuiwei Su ◽  
Jinxing Gao ◽  
Xiao Li ◽  
...  
Keyword(s):  
Alveolar Bone ◽  
Survival Rates ◽  
Bone Grafts ◽  
Bone Defects ◽  
Bone Augmentation ◽  
Implant Placement ◽  
Retrospective Clinical Study ◽  
One Year ◽  
The One

Abstract Objectives: This study evaluated the use of bone ring technique with xenogeneic bone grafts in treating horizontal alveolar bone defects. Material and methods: In total, 11 patients in need of horizontal bone augmentation treatment before implant placement were included in this retrospective study. All patients received simultaneous bone augmentation surgery and implant placement with xenogeneic bone ring grafts. We evaluated the postoperative efficacy of the bone ring technique with xenogeneic bone grafts using radiographical and clinical parameters. Results: Survival rates of implants were 100%. Cone-beam computed tomography revealed that the xenogeneic bone ring graft had significantly sufficient horizontal bone augmentation below the implant neck platform to 0 mm, 1mm, 2mm, and 3mm. It could also provide an excellent peri-implant tissue condition during the one-year follow-up after loading. Conclusion: The bone ring technique with xenogeneic bone ring graft could increase and maintain horizontal bone mass in the region of the implant neck platforms in serious horizontal bone defects.

scholarly journals Molar Septum Expansion with Osseodensification for Immediate Implant Placement, Retrospective Multicenter Study with Up-to-5-Year Follow-Up, Introducing a New Molar Socket Classification

2021 ◽  
Vol 12 (4) ◽  
pp. 66
Author(s):  
Samvel Bleyan ◽  
João Gaspar ◽  
Salah Huwais ◽  
Charles Schwimer ◽  
Ziv Mazor ◽  
...  
Keyword(s):  
Survival Rate ◽  
Site Preparation ◽  
Insertion Torque ◽  
Implant Survival ◽  
Implant Placement ◽  
Implant Survival Rate ◽  
Immediate Implants ◽  
Immediate Implant ◽  
The Mean ◽  
Molar Extraction

The ideal positioning of immediate implants in molar extraction sockets often requires the osteotomy to be in the interradicular septum, which can be challenging in some cases, with traditional site preparation techniques. Patients who had undergone molar tooth extraction and immediate implant placement at five different centers, and followed up between August 2015 and September 2020, were evaluated. Inclusion criteria were use of the osseodensification technique for implant site preparation. The primary outcome was septum width measurement pre-instrumentation and osteotomy diameter post expansion. Clinical outcomes, such as implant insertion torque (ISQ) and implant survival rate, were also collected. A total of 131 patients, who received 145 immediate implants, were included. The mean overall septum width at baseline was 3.3 mm and the mean osteotomy diameter post instrumentation was 4.65 mm. A total of ten implants failed: seven within the healing period and three after loading; resulting in a cumulative implant survival rate of 93.1%. This retrospective study showed that osseodensification is a predictable method for immediate implant placement with interradicular septum expansion in molar extraction sockets. Furthermore, it allowed the introduction of a new molar socket classification. In the future, well-designed controlled clinical studies are needed to confirm these results and further explore the potential advantages of this technique.

scholarly journals Immediate Placement and Restoration of a New Tapered Implant System in the Aesthetic Region: A Report of Three Cases

2020 ◽  
Vol 2020 ◽  
pp. 1-7
Author(s):  
Caroliene M. Meijndert ◽  
Gerry M. Raghoebar ◽  
Arjan Vissink ◽  
Henny J. A. Meijer
Keyword(s):  
Patient Satisfaction ◽  
Soft Tissues ◽  
Mean Value ◽  
Implant Placement ◽  
Bone Level ◽  
Immediate Implant ◽  
The Aesthetic ◽  
One Year ◽  
Implant System

Objective. To assess the clinical, radiographic, aesthetic, and patient-centred outcomes of a new implant system applied for an immediate implant placement and restoration approach in single tooth replacement of anterior maxillary teeth. Material and Method. Three cases were treated with a bone level tapered implant. All patients were treated with the same strategy involving flapless extraction and implant placement with simultaneous augmentation. Implants were provisionally restored with a screw-retained restoration at the day of surgery. Definitive restoration was fabricated after 3 months. Follow-up was one year after definitive restoration. Results. At the 1-year follow-up, the implants were stable and no complications had occurred. Peri-implant bone levels had increased with a mean value of 0.24±0.30 mm between definitive restoration placement and 1 year of follow-up. Clinical outcome scores showed healthy soft tissues. Mean Pink and White Esthetic scores were rated 7.0 and 7.3, respectively. Mean patient satisfaction had improved from 55.7 (pretreatment) to 90.0 (1-year follow-up) on a 0-100 VAS scale. Conclusion. Immediate implant placement and restoration with the new tapered bone level implant system are accompanied by good initial clinical and radiographic results as well as high patient satisfaction.

scholarly journals The success of immediate implant placement with Zero insertion torque

2019 ◽  
Author(s):  
Samy Aboelyazied Elian
Keyword(s):  
Survival Rate ◽  
Key Words ◽  
Primary Stability ◽  
Insertion Torque ◽  
Torque Measurement ◽  
Implant Survival ◽  
Maxillary Bone ◽  
Implant Placement ◽  
Immediate Implant

Abstract Background The primary stability in immediate implant placement was considered one of the prerequisites for the achievement of good osseointgration. The insertion torque varies between cases depending on many factors and may goes down to Zero that may affect the prognosis of the implant especially in the soft maxillary bone. The aim of the study was to assess clinically the success&/or failure of immediate flapless implant placement in the maxilla with Zero insertion torque measurement with a follow up time ranging 2-4 years. Results: out of 780 analyzed, fourteen implants were placed in fresh extraction sockets for single rooted teeth in the maxilla and did not get primary stability (zero insertion torque). Their survival rate was 85.7%. Conclusions: The loss of torque during immediate implant placement to Zero may jeopardize the survival of the implants, but it may not be statistically significant with their failure and loss. The lack of certain conditions that are absent during their surgical installation and healing have the major effects on success. The implant primary stability is not an absolute prerequisite to osseointegration; however, it may affect the implant survival rate. Key words: 0 torque implant insertion, implant primary stability, loose implant, immediate implant survival, immediate implant placement.

Sign in / Sign up

Export Citation Format

Share Document