scholarly journals A Comparative Study on Acoustic Optimization and Analysis of CLD/Plate in a Cavity Using ESO and GA

2018 ◽  
Vol 2018 ◽  
pp. 1-16 ◽  
Author(s):  
Dongdong Zhang ◽  
Shuwen Wang ◽  
Ling Zheng
Keyword(s):  
Boundary Conditions ◽  
Radiation Power ◽  
Sound Radiation ◽  
Computational Time ◽  
Sound Power ◽  
Normal Velocity ◽  
Flexible Plate ◽  
Rejection Ratio ◽  
Sound Radiation Power ◽  
Element Method

An acoustic radiation model of a cavity with a flexible plate treated with constrained layer damping (CLD) is developed by a combination of finite element method (FEM) and boundary element method (BEM). An acoustic topology optimization model is established with the objective of minimizing sound radiation power at specific modal frequency and design variables defined as locations of CLD treatments. The evolutionary structural optimization (ESO) method and genetic algorithm (GA) are employed to search optimal CLD configurations. Sound power sensitivity for CLD/plate is derived to determine search direction in ESO optimization procedure. The optimal CLD layouts for the flexible plate with two different boundary conditions are obtained and analyzed. Computational time, optimal layouts, and minimum sound power obtained using ESO and GA are compared. The results demonstrate effectiveness of the two methods, and ESO is more efficient to obtain deterministic and more practical optimal CLD material layouts for minimizing sound radiation power. The influences of CLD materials thickness and exciting force locations on optimal results obtained using ESO are discussed in detail. It is shown that the optimal rejection ratio varies with thicknesses of CLD materials and distribution of normal velocity of the flexible plate. Variation trend of the optimal rejection ratio is opposite for the two boundary conditions.

scholarly journals A hierarchical optimization strategy for position and thickness optimization of constrained layer damping/plate to minimize sound radiation power

2018 ◽  
Vol 10 (10) ◽  
pp. 168781401880325 ◽  
Author(s):  
Dongdong Zhang ◽  
Tang Qi ◽  
Ling Zheng
Keyword(s):  
Radiation Power ◽  
Sound Radiation ◽  
Hierarchical Optimization ◽  
Initial Structure ◽  
Sound Power ◽  
Constrained Layer Damping ◽  
Optimization Strategy ◽  
Optimal Position ◽  
Damping Materials ◽  
Sound Radiation Power

A hierarchical optimization strategy is proposed to optimally design constrained layer damping materials patched on the base plate for minimizing sound radiation power. A sound radiation optimization model is established by taking positions and thicknesses of constrained layer damping materials as design variables, and added mass as constraints. The hierarchical optimization procedure is implemented, in which evolutionary structural optimization method is employed to get optimal position layouts of constrained layer damping materials, and genetic algorithm is used to find optimal thickness configurations of constrained layer damping materials by taking the plate with optimal position layouts of constrained layer damping materials as initial structure. Two sound power sensitivities are formulated and compared for position optimization. Numerical examples in which unweighted/weighted objective functions are considered are presented, optimal positions and thickness configurations of constrained layer damping materials patched on the plate are obtained and discussed. The results demonstrate that the proposed strategy is very effective to achieve larger sound power reduction by reconfiguring the thickness of constrained layer damping materials for the results of position optimization.

scholarly journals Sound Radiation Analysis of Constrained Layer Damping Structures Based on Two-Level Optimization

Materials ◽  
2019 ◽  
Vol 12 (19) ◽  
pp. 3053 ◽  
Author(s):  
Zhang ◽  
Wu ◽  
Chen ◽  
Wang ◽  
Zheng
Keyword(s):  
Radiation Power ◽  
Sound Radiation ◽  
Base Plate ◽  
Sound Power ◽  
Optimization Approach ◽  
Constrained Layer Damping ◽  
Optimal Position ◽  
Beso Method ◽  
Vibration And Sound Radiation ◽  
Sound Radiation Power

Constrained layer damping (CLD) is an effective method for suppressing the vibration and sound radiation of lightweight structures. In this article, a two-level optimization approach is presented as a systematic methodology to design position layouts and thickness configurations of CLD materials for suppressing the sound power of vibrating structures. A two-level optimization model for the CLD structure is developed, considering sound radiation power as the objective function and different additional mass fractions as constraints. The proposed approach applies a modified bi-directional evolutionary structural optimization (BESO) method to obtain several optimal position layouts of CLD materials pasted on the base structure, and sound power sensitivity analysis is formulated based on sound radiation modes for the position optimization of CLD materials. Two strategies based on the distributions of average normalized elemental kinetic energy and strain energy of the base plate are proposed to divide optimal position layouts of CLD materials into several subareas, and a genetic algorithm (GA) is employed to optimally reconfigure the thicknesses of CLD materials in the subareas. Numerical examples are provided to illustrate the validity and efficiency of this approach. The sound radiation power radiated from the vibrating plate, which is treated with multiple position layouts and thickness reconfigurations of CLD materials, is emphatically discussed.

Calculation of Sound Radiation Power at Two Ends of Duct System

2011 ◽  
Vol 295-297 ◽  
pp. 2382-2385
Author(s):  
Tao Feng ◽  
Jing Wang ◽  
Bin Liu ◽  
Xue Wu ◽  
Nan Li
Keyword(s):  
Sound Source ◽  
Radiation Power ◽  
Sound Radiation ◽  
Calculation Model ◽  
Sound Power ◽  
Duct System ◽  
Calculation Results ◽  
Source Characteristic ◽  
Sound Radiation Power ◽  
The Relationship

A method to calculate the radiation sound power from the sound source characteristic of the duct component is developed here; The relationship between the sound source characteristic and the acoustical boundary conditions of the duct ends is also researched by the experiment. Based on the two-port model, the sound source characteristic and the sound transfer matrix of the duct component can be obtained by the numerical or experimental methods. The calculation model to predict the radiation sound power at the end of the duct system is deduced from the sound source characteristic of the duct component. A simple experimental duct system to validate the calculation model is setup and the measurement and calculation results are compared here as well.

Research on Vibration and Sound Radiation from Submarine Functionally Graded Material Nonpressure Cylindrical Shell

2013 ◽  
Vol 690-693 ◽  
pp. 3046-3049
Author(s):  
Yan Bing Zhang ◽  
Chun Yu Ren ◽  
Xi Zhu
Keyword(s):  
Cylindrical Shell ◽  
Acoustic Radiation ◽  
Radiation Power ◽  
Sound Radiation ◽  
Functionally Graded ◽  
Underwater Sound ◽  
Graded Materials ◽  
Graded Material ◽  
Vibration And Sound Radiation ◽  
Sound Radiation Power

In this paper, we establish the finite element (FEM) and boundary element (BEM) models of a submarine section, and study the underwater sound radiation field of three different non-pressure shells made of steel, steel with anechoic tile, and the functionally graded materials (FGM) separately using a method combining of FEM and BEM . Research shows that the combination of FEM and BEM can address the acoustic radiation calculation problem of FGM, and in comparison with steel and anechoic tile laying submarine section, the weight of FGM non-pressure shell reduces 1600kg, and the sound radiation power decreases 4db and 2.5db respectively, thus having better performance in vibration and noise reduction.

scholarly journals Prediction of Sound Radiation from Submerged Cylindrical Shell Based on Dominant Modes

2020 ◽  
Vol 10 (9) ◽  
pp. 3073 ◽  
Author(s):  
Chao Zhang ◽  
Sihui Li ◽  
Dejiang Shang ◽  
Yuyuan Han ◽  
Yuyang Shang
Keyword(s):  
Cylindrical Shell ◽  
Radiation Power ◽  
Cylindrical Shells ◽  
Low Frequency ◽  
Sound Radiation ◽  
Radiation Efficiency ◽  
Frequency Sound ◽  
Comparison Results ◽  
Sound Radiation Efficiency ◽  
Sound Radiation Power

A sound radiation calculation method by using dominant modes is proposed to predict the sound radiation from a cylindrical shell. This method can provide an effective way to quickly predict the sound radiation of the structure by using as few displacement monitoring points as possible on the structure surface. In this paper, modal analyses of a submerged cylindrical shell are carried out by taking the vibration mode of a cylindrical shell in a vacuum, as a set of orthogonal bases. The modal sound radiation efficiency and modal contributions to sound radiation power are presented, and comparison results show that a few modes dominantly contribute to the sound radiation power at low frequencies. These modes, called dominantly radiated structural modes in this paper, are applied to predict the sound radiation power of submerged cylindrical shells by obtaining the modal participant coefficients and sound radiation efficiency of these dominant modes. Aside from the orthogonal decomposition method, a method of solving displacement modal superposition equations is proposed to extract the modal participant coefficients, because few modes contribute to the vibration displacement near the resonant frequencies. Some simulations of cylindrical shells with different boundaries are conducted, and the number of measuring points required are examined. Results show that this method, based on dominant modes, can well predict the low-frequency sound radiation power of submerged cylindrical shells. In addition, compared with the boundary element method, this method can better reduce the number of required measuring points significantly. The data of these important modes can be saved, which can help to predict the low-frequency sound radiation of the same structure faster in the future.

Sound Radiation Response of a Rectangular Plate Having a Side Crack of Arbitrary Length, Orientation, and Position

2015 ◽  
Vol 137 (2) ◽  
Author(s):  
Tanmoy Bose ◽  
Amiya R. Mohanty
Keyword(s):  
Rectangular Plate ◽  
Ritz Method ◽  
Sound Radiation ◽  
Radiation Efficiency ◽  
Sound Power ◽  
Cracked Plate ◽  
Side Crack ◽  
Radiated Sound ◽  
Radiated Sound Power ◽  
Element Method

Here, sound radiation characteristics of a rectangular plate having a side crack of different crack lengths, orientations, and positions are studied considering clamped boundary conditions. First, a free and forced vibration response analysis of a cracked plate is done using the Ritz method. Orthogonal polynomials are used for faster convergence and some corner functions are used to generate the effect of a crack. Radiated sound power and radiation efficiency of the cracked plate are computed by the quadruple integration. A convergence test of radiation efficiency is carried out to fix the number of polynomials and corner functions in the analysis. It is found that the radiation efficiency and radiated sound power computed by the Ritz method are close to the same obtained from the boundary element method (BEM). The natural frequencies computed using the Ritz method are also found to be close to that obtained from the finite element method (FEM). The radiation efficiency curves of different modes are shown for a change in crack length, orientation and position. Finally, the variations of normalized sound power are shown to be due to a change in the crack parameters.

scholarly journals Active control of structures and sound radiation modes and its application in vehicles

2016 ◽  
Vol 35 (4) ◽  
pp. 291-302 ◽  
Author(s):  
He-Xuan Hu ◽  
Bo Tang ◽  
Yang Zhao
Keyword(s):  
Radiation Power ◽  
Low Frequency ◽  
Sound Radiation ◽  
Diagonal Element ◽  
Structural Vibration ◽  
Structural Dynamic ◽  
First Order ◽  
Sound Radiation Efficiency ◽  
Sound Radiation Power ◽  
The Relationship

This paper presents computation of structural sound power and sound radiation modes, combined with structural dynamic equations to obtain the coupling relationship between sound and structures. As a result, the relationship between sound radiation modes of structures and structural vibration modes is established. The influence of the number and position of optimal secondary force sources on control of sound radiation modes is considered. Results show that sound radiation efficiency of sound radiation modes at the first order was more than that of sound radiation modes at other orders. The main diagonal element of coupling matrix between modes and sound radiation impedances was more than elements at other positions. Sound radiation modes at the first order were dominant sound radiation modes. When the number of secondary force sources was 4, the sound radiation power of structures was the lowest. Four force sources were taken as the basis to conduct on the related experiments in the anechoic chamber and compare with the computational result. Their results had a good consistency, which showed that the mentioned theory method was effective. Finally, the control strategy was applied to roofs of the vehicle. Experiments verified that sound pressure level of the driver in the low frequency was obviously improved, which remedied the defect of other optimization strategies for solving noises in the low frequency.

Sign in / Sign up

Export Citation Format

Share Document