scholarly journals A Semianalytical Production Prediction Model and Dynamics Performance Analysis for Shale Gas Wells

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-14
Author(s):  
Zhiming Hu ◽  
Yingying Xu ◽  
Xiangui Liu ◽  
Xianggang Duan ◽  
Jin Chang

The shale gas productivity model based on shale gas nonlinear seepage mechanism is an effective way to reasonably predict productivity. The incomplete gas nonlinear effects considered in the current production prediction models can lead to inaccurate production prediction. Based on the conventional five-zone compound flow model, comprehensive gas nonlinearities were considered in the improved compound linear flow model proposed in the paper and a semianalytical solution for productivity was obtained. The reliability of the productivity model was verified by the field data, and then, the 20-year production performance analysis of the gas well was studied. Ultimately, the key influencing factors of the fracture control stage and matrix control stage have been analyzed. Research indicated the following: (1) the EUR predicted by the productivity model is higher than the EUR that the comprehensive nonlinear effects are not considered, which demonstrated that the various nonlinear effects cannot be neglected during the production prediction to ensure the greater calculation accuracy; (2) during the early production stage of shale reservoir, the adsorbed gas is basically not recovered, and the cumulative adsorption contribution rate does not exceed 10%. The final adsorption gas contribution rate is 23.28%, and the annual adsorption rate can exceed 50% in the 20th year, showing that free gas and adsorbed gas are, respectively, important sources of the early stage of production and long-term stable production; (3) the widely ranged three-dimensional fracturing reformation of shale reservoirs and reasonable bottom hole pressure in the later matrix development process should be implemented to increase the effective early production of the reservoir and ensure the earlier gas production process of the matrix development. The findings of this study can help for better ensuring the prediction accuracy of the estimated ultimate recovery and understanding the main influencing factors of the dynamic performance of gas wells so as to provide a theoretical reference for production optimization and development plan formulation of the shale gas reservoirs.

2020 ◽  
Vol 34 (12) ◽  
pp. 16486-16492
Author(s):  
Zhiming Hu ◽  
Yalong Li ◽  
Jin Chang ◽  
Xianggang Duan ◽  
Ying Mu ◽  
...  

2018 ◽  
Vol 48 (6) ◽  
pp. 691-700 ◽  
Author(s):  
YongHui WU ◽  
LinSong CHENG ◽  
ShiJun HUANG ◽  
YongChao XUE ◽  
GuanYang DING

2019 ◽  
Author(s):  
Yonghui Wu ◽  
Linsong Cheng ◽  
Shijun Huang ◽  
Sidong Fang ◽  
John Edwin Killough ◽  
...  

2013 ◽  
Vol 16 (02) ◽  
pp. 216-228 ◽  
Author(s):  
Y.. Cho ◽  
O.G.. G. Apaydin ◽  
E.. Ozkan

Summary This paper presents an investigation of the effect of pressure-dependent natural-fracture permeability on production from shale-gas wells. The motivation of the study is to provide data for the discussion of whether it is crucial to pump proppant into natural fractures in shale plays. Experiments have been conducted on Bakken-shale core samples to select appropriate correlations to represent fracture conductivity as a function of pressure (the actual characterization of fracture conductivity under stress for a specific formation is not an objective of the study). Correlations have been used in a flow model to demonstrate the potential impact of natural-fracture closure as pressure drops during production. Although the correlations indicate up to an 80% reduction in fracture permeability over practical ranges of pressure, the results of the flow model do not warrant the claims that fracture closing plays a significant role in the productivity losses of shale-gas wells. A history match of the performances of two wells in the Barnett and Haynesville formations also indicates that the effect of pressure-dependent natural-fracture permeability on shale-gas-well production is a function of the permeability of the matrix system. If the matrix system is too tight, then the retained permeability of the natural fractures may still be sufficient for the available volume of the fluid when the system pressure drops.


Sign in / Sign up

Export Citation Format

Share Document