Abstract 2800: Assessment of Computational Fluid Dynamics to Calculate Individual Coronary Wall Shear Stress In-Vivo

Circulation ◽  
2008 ◽  
Vol 118 (suppl_18) ◽  
Author(s):  
Johannes Rieber ◽  
Thomas Redel ◽  
Holger Hetterich ◽  
Tobias Potzger ◽  
Konstantin Nikolaou ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Shear Stress ◽  
Coronary Angiography ◽  
Wall Shear Stress ◽  
Radio Frequency ◽  
Intravascular Ultrasound ◽  
Coronary Arteries ◽  
Wall Shear

Beyond classic risk parameters non physiologic or oscillating wall shear stress (WSS) has been proven to act as a local factor for initiation and progression of atherosclerosis as well as for plaque rupture. Direct measurement of WSS in-vivo is difficult and restricted to animal models. Computational fluid dynamics (CFD) is a validated tool to compute flow parameters and WSS. For this purpose an exact model of the underlying patient specific geometry of the coronary tree is a prerequisite. Using 3D-IVUS or modern multislice computed tomographic coronary angiography (CTA) with submilimeter resolution these data can be provided. The aim of this study was to 1.) demonstrate feasibility of in-vivo CFD calculation of human coronaries based on CTA and 2.) to correlate the findings with radio frequency tissue information derived by intravascular ultrasound. We prospectively included 10 patients with suspected coronary artery disease who received CTA (Dual source 64 slice CT) and invasive conventional coronary angiography. Intravascular ultrasound and ECG-triggered radio frequency analysis (VH) was attempted in all three epicardial vessels. In the CTA-dataset the coronaries were segmented and a mesh model for CFD was generated. CFD calculations were performed using a commercial available software package with laminar flow and blood as a Newtonian fluid as boundary conditions. Coronary models were stationary with rigid vessel walls, while the pulsatile inflow characteristics was derived from invasive Doppler velocity measurement. Flow pattern calculations, vessel wall shear stress and IVUS analysis were successfully performed in 24/30 and 17/30 coronary arteries. The presence of high shear stress and non turbulent flow was inversely correlated with the presence of plaque as determined by intravascular ultrasound. No correlation of any CFD parameter with the radio frequency tissue information could yet be observed. The findings of the present study demonstrate the feasibility of assessing fluid tissue interactions in human coronary arteries using CTA and its correlation to invasive findings. The possible impact of CFD parameters on risk- and treatment stratification has to be determined in a large scale prospective trial.

Relation Between Wall Shear Stress and Plaque Necrotic Core in the Left Coronary Arteries of Patients Using Intravascular Ultrasound and Computational Fluid Dynamics

2008 ◽  
Author(s):  
Jin Suo ◽  
Michael McDaniel ◽  
Habib Samady ◽  
Don Giddens
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Shear Stress ◽  
Wall Shear Stress ◽  
Intravascular Ultrasound ◽  
Coronary Arteries ◽  
Plaque Rupture ◽  
Necrotic Core ◽  
Elastic Membrane ◽  
Wall Shear

Atherosclerosis is a disease characterized by arterial plaques that include several components of which the necrotic core has been recognized as an important indicator of the likelihood of plaque rupture [1]. In the present study, the relation of hemodynamic wall shear stress (WSS) to necrotic core localization in the left coronary artery of patients was investigated using intravascular ultrasound (IVUS) and computational fluid dynamics (CFD). An innovative 3D measuring technique was developed and was successfully used to reconstruct coronary arteries in patients based on angiographic images and echo ultrasound slices from IVUS. The reconstruction includes lumen, external elastic membrane (EEM) and spatial distribution of plaque components such as fibrous tissue, necrotic core and calcium. WSS distribution in the vessel segment was computed by CFD, and the relative locations of necrotic core and WSS were determined. Results to date support the hypothesis that a greater necrotic core in coronary plaques is associated with areas of low WSS. The methodology developed has implications for the study of plaque progression and the prediction of likelihood of plaque rupture.

Comparison of morphological and rheological conditions between conventional and eversion carotid endarterectomy using computational fluid dynamics – a pilot study

Vascular ◽  
2014 ◽  
Vol 23 (5) ◽  
pp. 474-482 ◽  
Author(s):  
S Demirel ◽  
D Chen ◽  
Y Mei ◽  
S Partovi ◽  
H von Tengg-Kobligk ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Shear Stress ◽  
Wall Shear Stress ◽  
Carotid Endarterectomy ◽  
Patient Specific ◽  
Specific Data ◽  
Computational Fluid Dynamics Analysis ◽  
Carotid Bulb ◽  
Wall Shear

Purpose: To compare postoperative morphological and rheological conditions after eversion carotid endarterectomy versus conventional carotid endarterectomy using computational fluid dynamics. Basic methods: Hemodynamic metrics (velocity, wall shear stress, time-averaged wall shear stress and temporal gradient wall shear stress) in the carotid arteries were simulated in one patient after conventional carotid endarterectomy and one patient after eversion carotid endarterectomy by computational fluid dynamics analysis based on patient specific data. Principal findings: Systolic peak of the eversion carotid endarterectomy model showed a gradually decreased pressure along the stream path, the conventional carotid endarterectomy model revealed high pressure (about 180 Pa) at the carotid bulb. Regions of low wall shear stress in the conventional carotid endarterectomy model were much larger than that in the eversion carotid endarterectomy model and with lower time-averaged wall shear stress values (conventional carotid endarterectomy: 0.03–5.46 Pa vs. eversion carotid endarterectomy: 0.12–5.22 Pa). Conclusions: Computational fluid dynamics after conventional carotid endarterectomy and eversion carotid endarterectomy disclosed differences in hemodynamic patterns. Larger studies are necessary to assess whether these differences are consistent and might explain different rates of restenosis in both techniques.

NUMERICAL SIMULATION OF HEMODYNAMICS IN PORTAL VEIN WITH THROMBOSIS BY COMPUTATIONAL FLUID DYNAMICS

2014 ◽  
Vol 14 (06) ◽  
pp. 1440006 ◽  
Author(s):  
XINKAI WANG ◽  
GUOJIE LI ◽  
BIN CHEN ◽  
YANSONG PU ◽  
PENG NIE ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Shear Stress ◽  
Wall Shear Stress ◽  
Portal Vein ◽  
Mechanical Damage ◽  
Maximum Velocity ◽  
Vein System ◽  
Vein Thrombosis ◽  
Wall Shear

Portal vein thrombosis (PVT) is an important complication that is associated with cirrhotic portal hypertension. The etiology is as yet unclear but could be closely related to the hemodynamics of the portal vein system. This paper investigated the hemodynamics in the portal vein model, both with and without thrombosis, as well as the effect of obstructions on the hemodynamics of the portal vein system using the computational fluid dynamics (CFD) method. PVT can probably develop in the inlets of the portal vein as well as the left/right branches of the portal vein because the distribution of wall shear stress satisfies the conditions for PVT formation based upon the simulation of the hemodynamics in the normal portal vein model. According to the above results, geometric models for a portal vein with a thrombus were constructed and the influence of different degrees (26%, 39%, 53% and 64%) of obstructions was studied. In the model with the maximum obstruction (64% blocked), the maximum velocity of portal vein (PV) increased up to twice than in the model without thrombosis, and the maximum wall shear stress of PV in the model with thrombosis (64% blocked) increased up to 9.4 Pa, whereas it was only 1.9 Pa in the model without thrombosis (nearly one fifth of the maximum wall shear stress). Excessive wall shear stress may cause mechanical damage to the blood vessels and induce physiological changes.

Computational Fluid Dynamics of a Vascular Access Case for Hemodialysis

2000 ◽  
Vol 123 (3) ◽  
pp. 284-292 ◽  
Author(s):  
Bogdan Ene-Iordache ◽  
Lidia Mosconi ◽  
Giuseppe Remuzzi ◽  
Andrea Remuzzi
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Blood Flow ◽  
Shear Stress ◽  
Wall Shear Stress ◽  
Radial Artery ◽  
Stress Gradient ◽  
Vascular Lesions ◽  
Patient Specific ◽  
Wall Shear

Vascular accesses (VA) for hemodialysis are usually created by native arteriovenous fistulas (AVF) or synthetic grafts. Maintaining patency of VA continues to be a major problem for patients with end-stage renal disease, since in these vessels thrombosis and intimal hyperplasia often occur. These lesions are frequently associated with disturbed flow that develops near bifurcations or sharp curvatures. We explored the possibility of investigating blood flow dynamics in a patient-specific model of end-to-end native AVF using computational fluid dynamics (CFD). Using digital subtraction angiographies of an AVF, we generated a three-dimensional meshwork for numerical analysis of blood flow. As input condition, a time-dependent blood waveform in the radial artery was derived from centerline velocity obtained during echo-color-Doppler ultrasound examination. The finite element solution was calculated using a fluid-dynamic software package. In the straight, afferent side of the radial artery wall shear stress ranged between 20 and 36 dynes/cm2, while on the inner surface of the bending zone it increased up to 350 dynes/cm2. On the venous side, proximal to the anastomosis, wall shear stress was oscillating between negative and positive values (from −12 dynes/cm2 to 112 dynes/cm2), while distal from the anastomosis, the wall shear stress returned within the physiologic range, ranging from 8 to 22 dynes/cm2. Areas of the vessel wall with very high shear stress gradient were identified on the bending zone of the radial artery and on the venous side, after the arteriovenous shunt. Secondary blood flows were also observed in these regions. CFD gave a detailed description of blood flow field and showed that this approach can be used for patient-specific analysis of blood vessels, to understand better the role of local hemodynamic conditions in the development of vascular lesions.

Sign in / Sign up

Export Citation Format

Share Document