Dye-Sensitized Solar Cells Using Polymer Electrolytes Based on Poly(vinylidene fluoride-hexafluoro propylene) Nanofibers by Electrospinning Method

2008 ◽  
Vol 8 (9) ◽  
pp. 4889-4894 ◽  
Author(s):  
Sung-Hae Park ◽  
Ji-Un Kim ◽  
Seong-Yeop Lee ◽  
Won-Ki Lee ◽  
Jin-Kook Lee ◽  
...  
Keyword(s):  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Polymer Electrolytes ◽  
Vinylidene Fluoride ◽  
Short Circuit ◽  
Power Conversion ◽  
Polymer Concentration ◽  
Dye Sensitized ◽  
Electrospinning Method ◽  
Poly Vinylidene Fluoride

The dye-sensitized solar cell (DSSC) devices using polymer electrolytes based on electrospun poly(vinylidene fluoride-hexafluoro propylene) (PVDF-HFP) nanofibers were fabricated and investigated the photovoltaic performances. The electrospun PVDF-HFP nanofibers were prepared by various parameters such as; polymer concentrations, applied voltages, and tip to collector distances (TCD) by the electrospinning method. The open circuit voltage (VOC), short circuit current (JSC), fill factor (FF), and overall power conversion efficiency (η) of DSSC devices using electrospun PVDF-HFP nanofibers were 0.7180–0.7420 V, 9.7200–10.8837 mA/cm2, 0.5610–0.6250, and 4.1700–5.0186%, respectively. When 15 wt% of polymer concentration, 14 kV of applied voltage, and 14 cm of TCD is applied to fabricate the PVDF-HFP nanofiber, the electrospun PVDF-HFP nanofiber should be the regular diameter of a nanofiber, the power conversion efficiency of the DSSC device reached 5.0186% as the best result.

Organic Sensitizers Containing Julolidine Moiety for Dye-Sensitized Solar Cells

2008 ◽  
Vol 8 (9) ◽  
pp. 4761-4766 ◽  
Author(s):  
Dong Wook Kim ◽  
Jin Joo Choi ◽  
Man Ku Kang ◽  
Yongku Kang ◽  
Changjin Lee
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Short Circuit ◽  
Power Conversion ◽  
Dye Sensitized Solar Cells ◽  
Open Circuit ◽  
Dye Sensitized ◽  
Sensitized Solar Cells ◽  
Organic Sensitizers

We prepared organic sensitizers (S1 and S2) containing julolidine moiety as a donor, phenyl or phenylene thiophene units as a conjugation bridge, and cyano acetic acid as an acceptor for dye sensitized solar cells. S1 exhibited two absorption maxima at 441 nm (ε = 26 200) and 317 nm (ε = 15 500) due to the π–π* transition of the dye molecule. S2 dyes with an additional thiophene unit showed the absorption maximum extended by 18 nm. DSSCs based on S1 dye achieved 2.66% of power conversion efficiency with 8.3 mA cm−2 of short circuit current, 576 mV of open circuit voltage, and 0.56 of fill factor. DSSCs using S2 dye with a longer conjugation attained only 1.48% of power conversion efficiency. The 0.21 V lower driving force for regeneration of the S2 dye compared to the S1 dye is one of the reasons for low conversion efficiency of the S2 dye.

scholarly journals High performance tandem organic solar cells via a strongly infrared-absorbing narrow bandgap acceptor

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Zhenrong Jia ◽  
Shucheng Qin ◽  
Lei Meng ◽  
Qing Ma ◽  
Indunil Angunawela ◽  
...  
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Organic Solar Cells ◽  
High Performance ◽  
Short Circuit ◽  
Power Conversion ◽  
High Power Conversion Efficiency ◽  
Device Structure ◽  
Narrow Bandgap

AbstractTandem organic solar cells are based on the device structure monolithically connecting two solar cells to broaden overall absorption spectrum and utilize the photon energy more efficiently. Herein, we demonstrate a simple strategy of inserting a double bond between the central core and end groups of the small molecule acceptor Y6 to extend its conjugation length and absorption range. As a result, a new narrow bandgap acceptor BTPV-4F was synthesized with an optical bandgap of 1.21 eV. The single-junction devices based on BTPV-4F as acceptor achieved a power conversion efficiency of over 13.4% with a high short-circuit current density of 28.9 mA cm−2. With adopting BTPV-4F as the rear cell acceptor material, the resulting tandem devices reached a high power conversion efficiency of over 16.4% with good photostability. The results indicate that BTPV-4F is an efficient infrared-absorbing narrow bandgap acceptor and has great potential to be applied into tandem organic solar cells.

Spontaneous Enhancement of Power Conversion Efficiency in SnO2-Based Dye-Sensitized Solar Cells

2021 ◽  
Vol 11 (3) ◽  
pp. 674-678
Author(s):  
Shibing Zou ◽  
Lingting Song ◽  
Junhong Duan ◽  
Le Huang ◽  
Weiqing Liu ◽  
...  
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Dye Sensitized Solar Cells ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

Donor-π-acceptor, triazine-linked porphyrin dyads as sensitizers for dye-sensitized solar cells

2015 ◽  
Vol 19 (01-03) ◽  
pp. 175-191 ◽  
Author(s):  
Ganesh D. Sharma ◽  
Galateia E. Zervaki ◽  
Kalliopi Ladomenou ◽  
Emmanuel N. Koukaras ◽  
Panagiotis P. Angaridis ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Carboxylic Acid ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Dye Sensitized Solar Cells ◽  
Orbital Energy ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

Two porphyrin dyads with the donor-π-acceptor molecular architecture, namely ( ZnP )-[triazine-gly]-( H 2 PCOOH ) and ( ZnP )-[triazine-Npip]-( H 2 PCOOH ), which consist of a zinc-metalated porphyrin unit and a free-base porphyrin unit covalently linked at their peripheries to a central triazine group, substituted either by a glycine in the former or a N-piperidine group in the latter, have been synthesized via consecutive amination substitution reactions of cyanuric chloride. The UV-vis absorption spectra and cyclic-voltammetry measurements of the two dyads, as well as theoretical calculations based on Density Functional Theory, suggest that they have suitable frontier orbital energy levels for use as sensitizers in dye-sensitized solar cells. Dye-sensitized solar cells based on ( ZnP )-[triazine-gly]-( H 2 PCOOH ) and ( ZnP )-[triazine-Npip]-( H 2 PCOOH ) have been fabricated, and they were found to exhibit power conversion efficiency values of 5.44 and 4.15%, respectively. Photovoltaic measurements (J–V curves) and incident photon to current conversion efficiency spectra of the two solar cells suggest that the higher power conversion efficiency value of the former solar cell is a result of its enhanced short circuit current, open circuit voltage, and fill factor values, as well as higher dye loading. This is ascribed to the existence of two carboxylic acid anchoring groups in ( ZnP )-[triazine-gly]-( H 2 PCOOH ), compared to one carboxylic acid group in ( ZnP )-[triazine-Npip]-( H 2 PCOOH ), which leads to a more effective binding onto the TiO 2 photoanode. Electrochemical impedance spectra show evidence that the ( ZnP )-[triazine-gly]-( H 2 PCOOH ) based solar cell exhibits a longer electron lifetime and more effective suppression of charge recombination reactions between the injected electrons and electrolyte.

Push–pull type alkoxy-wrapped N-annulated perylenes for dye-sensitized solar cells

RSC Advances ◽  
2016 ◽  
Vol 6 (84) ◽  
pp. 81184-81190 ◽  
Author(s):  
Qingbiao Qi ◽  
Jing Zhang ◽  
Soumyajit Das ◽  
Wangdong Zeng ◽  
Jie Luo ◽  
...  
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Dye Sensitized Solar Cells ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

Three push–pull type, alkoxy-wrapped N-annulated perylene based sensitizers were synthesized and power conversion efficiency up to 8.38% was achieved.

Sign in / Sign up

Export Citation Format

Share Document