TiO2/Bi A-SPAES(Ds 1.0) Composite Membranes for Proton Exchange Membrane in Direct Methanol Fuel Cell (DMFC)

2014 ◽  
Vol 14 (9) ◽  
pp. 7286-7292 ◽  
Author(s):  
Ni Zhang ◽  
Chuanqing Zhong ◽  
Bing Xie ◽  
Huiling Liu ◽  
Xingzu Wang
2012 ◽  
Vol 66 (12) ◽  
Author(s):  
Chumphol Yunphuttha ◽  
Win Bunjongpru ◽  
Supanit Porntheeraphat ◽  
Atchana Wongchaisuwat ◽  
Charndet Hruanun ◽  
...  

AbstractA direct-methanol fuel cell containing three parts: microchannels, electrodes, and a proton exchange membrane (PEM), was investigated. Nafion resin (NR) and polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene (PS) were used as PEMs. Preparation of PEMs, including compositing with other polymers and their solubility, was performed and their proton conductivity was measured by a four point probe. The results showed that the 5 % Nafion resin has lower conductivity than the 5 % PS solution. The micro-fuel cell contained two acrylic channels, PEM, and two platinum catalyst electrodes on a silicon wafer. The assembled micro-fuel cells used 2 M methanol at the flow rate of 1.5 mL min−1 in the anode channel and 5 × 10−3 M KMnO4 at the flow rate of 1.5 mL min−1 in the cathode channel. The micro-fuel cell with the electrode distance of 300 μm provided the power density of 59.16 μW cm−2 and the current density of 125.60 μA cm−2 at 0.47 V.


2017 ◽  
Vol 21 (1) ◽  
Author(s):  
Phornpussadee Umsarika ◽  
Sairung Changkhamchom ◽  
Nophawan Paradee ◽  
Anuvat Sirivat ◽  
Pitt Supaphol ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document