Deinking sludge compost stability and maturity assessment using Fourier transform infrared spectroscopy and thermal analysis

2019 ◽  
Vol 37 (10) ◽  
pp. 1043-1057 ◽  
Author(s):  
Emna Marouani ◽  
Naïma Kolsi Benzina ◽  
Noura Ziadi ◽  
Besma Bouslimi ◽  
Amani Abouda ◽  
...  

Thermal composting is an important and useful way to transfer raw organic matter into value-added product rich in humic substances. Furthermore, thermal composting is a very promising way to reduce deinking paper sludge pollutions, which are difficult to remove. The objective of this study was to investigate the behaviour of the composting process of deinking paper sludge with poultry manure over 14 months. Two composts were used: C1 (70/30: deinking paper sludge/poultry manure) and C2 (50/50: deinking paper sludge/poultry manure). The compost stability and maturity were assessed via physico–chemical and thermal analyses: thermogravimetric analysis, differential thermal analysis and diffuse reflectance infrared Fourier transform spectroscopy. Diffuse reflectance infrared Fourier transform spectroscopy analysis provided chemical information for the presence of aromatic, phenolic, aliphatic and polysaccharidic structures. Thermogravimetry analyses revealed that both deinking paper sludge composts were rich in humic acids. The ratio E4/E6 (fulvic acids/humic acids) was also carried out to characterise the maturity index of composts. After 14 months, the compost C2 is more stable, mature and rich in humic acids than compost C1. Furthermore, the addition of poultry manure to the deinking paper sludge-based composts enhanced the formation of humic substances. From 0 to 14 months of composting, the concentration of polychlorinated biphenyls decreased from 0.2 to 0.1 mg kg−1 and from 0.6 to 0.2 mg kg−1 for C1 and C2, respectively.

Author(s):  
Peter R. Griffiths ◽  
S. Agyare Yeboah ◽  
Issam M. Hamadeh ◽  
Pamela J. Duff ◽  
Wang-Jih Yang ◽  
...  

2015 ◽  
Vol 182 ◽  
pp. 97-111 ◽  
Author(s):  
Denis J. Cumming ◽  
Christopher Tumilson ◽  
S. F. Rebecca Taylor ◽  
Sarayute Chansai ◽  
Ann V. Call ◽  
...  

Co-electrolysis of carbon dioxide and steam has been shown to be an efficient way to produce syngas, however further optimisation requires detailed understanding of the complex reactions, transport processes and degradation mechanisms occurring in the solid oxide cell (SOC) during operation. Whilst electrochemical measurements are currently conducted in situ, many analytical techniques can only be used ex situ and may even be destructive to the cell (e.g. SEM imaging of the microstructure). In order to fully understand and characterise co-electrolysis, in situ monitoring of the reactants, products and SOC is necessary. Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS) is ideal for in situ monitoring of co-electrolysis as both gaseous and adsorbed CO and CO2 species can be detected, however it has previously not been used for this purpose. The challenges of designing an experimental rig which allows optical access alongside electrochemical measurements at high temperature and operates in a dual atmosphere are discussed. The rig developed has thus far been used for symmetric cell testing at temperatures from 450 °C to 600 °C. Under a CO atmosphere, significant changes in spectra were observed even over a simple Au|10Sc1CeSZ|Au SOC. The changes relate to a combination of CO oxidation, the water gas shift reaction, carbonate formation and decomposition processes, with the dominant process being both potential and temperature dependent.


2007 ◽  
Vol 128 (1-2) ◽  
pp. 52-62 ◽  
Author(s):  
J. Wood ◽  
M.J. Alldrick ◽  
J.M. Winterbottom ◽  
E.H. Stitt ◽  
S. Bailey

Sign in / Sign up

Export Citation Format

Share Document