Three-Dimensional Analysis of the First Metatarsal Bone in Minimally Invasive Distal Linear Metatarsal Osteotomy for Hallux Valgus

2019 ◽  
Vol 41 (1) ◽  
pp. 84-93 ◽  
Author(s):  
Hiroyuki Seki ◽  
Satoshi Oki ◽  
Yasunori Suda ◽  
Kenichiro Takeshima ◽  
Tetsuro Kokubo ◽  
...  

Background: Modified Bösch osteotomy (distal linear metatarsal osteotomy [DLMO]) is one of the minimally invasive correctional surgeries for hallux valgus. The 3-dimensional correctional angles and distances of the first metatarsal bone in DLMO have not been clarified. The purpose of this study was to analyze the 3-dimensional postoperative morphological changes of the first metatarsal bone in DLMO. Methods: Twenty patients (30 feet) who underwent DLMO were enrolled. Preoperative plain radiographs and computed tomography (CT) scans of the feet were examined. Postoperative radiographs and CT scans were also obtained after bone union. The surface data of the pre- and postoperative first metatarsals were reconstructed from the CT data. The positions of the distal ends of the first metatarsals described with respect to the proximal ends were calculated using CT surface-matching technique. Results: The distal end of the first metatarsal after DLMO was significantly supinated (10.2 ± 6.0 degrees, P < .001), adducted (6.0 ± 11.8 degrees, P = .004), dorsiflexed (11.1 ± 10.9, P < .001), shortened (7.4 ± 2.5 mm, P < .001), elevated (2.3 ± 3.1 mm, P = .001), and laterally shifted (8.2 ± 3.0 mm, P < .001) compared to the preoperative metatarsal distal end. Supination correction demonstrated a significant correlation with adduction correction ( r = 0.659, P < .001) on correlation analyses between these parameters. Conclusion: The 3-dimensional corrections of the first metatarsal bone after DLMO were evaluated. Pronation and abduction were successfully corrected. Furthermore, adduction correction might be an important factor affecting correction of pronation. Level of Evidence: Level IV, retrospective case series.

2019 ◽  
Vol 41 (2) ◽  
pp. 125-132 ◽  
Author(s):  
Matthew S. Conti ◽  
Joseph F. Willett ◽  
Jonathan H. Garfinkel ◽  
Mark C. Miller ◽  
Stephen V. Costigliola ◽  
...  

Background: Hallux valgus (HV) is a triplanar deformity of the first ray including pronation of the first metatarsal with subluxation of the sesamoids. The purpose of this study was to investigate if a first tarsometatarsal fusion (modified Lapidus technique), without preoperative knowledge of pronation measured on weightbearing computed tomographic (CT) scans, changed pronation of the first metatarsal and determine if reduction of the sesamoids was correlated with changes in first metatarsal pronation. Methods: Thirty-one feet in 31 patients with HV who underwent a modified Lapidus procedure had preoperative and at least 5-month postoperative weightbearing CT scans and radiographs. Differences in preoperative and postoperative pronation of the first metatarsal using a 3-dimensional computer-aided design, HV angle, and intermetatarsal angle (IMA) were calculated using Wilcoxon signed-rank tests. After dividing patients into groups based on sesamoid station, Kruskal-Wallis H tests were used to compare first metatarsal pronation between the groups. Results: The mean preoperative and postoperative pronation of the first metatarsal was 29.0 degrees (range 15.8-51.1, SD 8.7) and 20.2 degrees (range 10.4-32.6, SD 5.4), respectively, which was a mean change in pronation of the first ray of −8.8 degrees ( P < .001). There was no difference in pronation of the first ray when stratified by postoperative sesamoid position ( P > .250). The average preoperative and postoperative IMA was 16.7 degrees (SD 3.2) and 8.8 degrees (SD 2.8), which demonstrated a significant change ( P < .001). Conclusions: The modified Lapidus procedure was an effective tool to change pronation of the first ray. Reduction of the sesamoids was not associated with postoperative first metatarsal pronation. Level of Evidence: Level IV, case series.


2021 ◽  
pp. 193864002110459
Author(s):  
Toshinori Kurashige

Background: Few studies have reported results of minimally invasive chevron Akin osteotomy (MICA) for moderate to severe hallux valgus correction. This study aims to evaluate MICA for moderate to severe hallux valgus radiographically and clinically. Methods: Forty feet were prospectively reviewed. Twenty-eight feet (70%) had a severe deformity (hallux valgus angle (HVA) ≥40° and/or first intermetatarsal angle (IMA) ≥18°). We measured HVA, IMA, lateral shape of the metatarsal head (round sign), tibial sesamoid position, first metatarsal shortening on anteroposterior weightbearing radiographs, and inclination angle of first metatarsal on lateral weightbearing radiographs. We evaluated the Japanese Society for Surgery of the Foot hallux scale and Self-Administered Foot Evaluation Questionnaire responses preoperatively and at the most recent follow-up. Results: All measurements except shortening and inclination angle improved significantly. Both clinical scale and all subscores significantly improved. Conclusions: MICA improved moderate to severe hallux valgus both radiographically and clinically. Level of Evidence: Level IV: case series


2018 ◽  
Vol 40 (1) ◽  
pp. 89-97 ◽  
Author(s):  
Matthias Braito ◽  
Dietmar Dammerer ◽  
Philipp Hofer-Picout ◽  
Gerhard Kaufmann

Background: The aim of this study was to assess radiographic and clinical outcomes after double osteotomy with proximal opening wedge first metatarsal osteotomy and first metatarsal distal chevron osteotomy in the treatment of moderate to severe hallux valgus. Methods: 33 patients (4 male, 29 female; 36 feet; average age 60.7 years) were included in the study. Radiographic and clinical outcome in terms of intermetatarsal angle (IMA), hallux valgus angle (HVA), distal metatarsal articular angle (DMAA), and the American Orthopaedic Foot & Ankle Society metatarsophalangeal-interphalangeal hallux score (AOFAS MTP-IP hallux score) were investigated at 6 weeks, 6 months, and after an average of 28 (range, 7-123) months postoperatively. Results: Preoperative IMA, HVA, and DMMA showed statistically significant improvement ( P ≤ .05) from 19.1 ± 3.8 (8.9-27.3) degrees, 45.4 ± 8.7 (25.9-60.9) degrees, and 20.8 ± 8.9 (4.5-38.0) degrees to 6.0 ± 3.3 (0.4-12.2) degrees, 9.1 ± 8.9 (–6.7 to 39.0) degrees, and 6.4 ± 5.6 (–6.8 to 21.0) degrees at last follow-up, respectively. Postoperative AOFAS MTP-IP hallux score averaged 88.1 points. Overall, 10 complications were observed: hallux varus (3 feet), hallux valgus recurrence (3 feet), nonunion (1 foot), loss of fixation (1 foot), and wound infection (2 feet). Conclusion: Proximal opening wedge first metatarsal osteotomy with distal chevron osteotomy provided powerful correction of each component of moderate to severe hallux valgus but had a substantial rate of complications in terms of over- and undercorrection, nonunion, loss of fixation, and wound infection. Level of Evidence: Level IV, case series.


2020 ◽  
Vol 5 (4) ◽  
pp. 247301142096071
Author(s):  
Jeremy Y. Chan ◽  
Naudereh Noori ◽  
Stephanie Chen ◽  
Glenn B. Pfeffer ◽  
Timothy P. Charlton ◽  
...  

Background: Distal chevron metatarsal osteotomy (DCO) is a common technique to address hallux valgus (HV), which involves coronal translation of the capital fragment resulting in a nonanatomic first metatarsal. The purpose of this study was to evaluate the radiographic effect of the DCO on the anatomic vs the mechanical axis of the first metatarsal. Our hypothesis was that patients undergoing DCO would have improvement in the mechanical metatarsal axis but worsening of the anatomic axis. Methods: This was a retrospective case series of consecutive patients who underwent DCO for HV. The primary outcomes were the change in anatomic first–second intermetatarsal angle (a1-2IMA) vs mechanical first–second intermetatarsal angle (m1-2IMA). Secondary outcomes included the change in hallux valgus angle (HVA) and medial sesamoid position. Results: 40 feet were analyzed with a mean follow-up of 21.2 weeks. The a1-2IMA increased significantly (mean, 4.1 degrees) whereas the m1-2IMA decreased significantly (mean, 4.6 degrees) following DCO. There was a significant improvement in HVA (mean, 12.5 degrees). Medial sesamoid position was improved in 21 feet (52.5%). Patients with no improvement in sesamoid position were found to have a larger increase in a1-2IMA (mean, 4.7 vs 3.5 degrees, P = .03) and less improvement in m1-2IMA (mean, 3.8 vs 5.2 degrees, P = .02) compared to patients with improvement in sesamoid position. Conclusion: Distal chevron osteotomy for HV was associated with worsening of the anatomic axis of the first metatarsal despite improvements in the mechanical metatarsal axis, HVA, and medial sesamoid position. Greater worsening of the anatomic axis was associated with less improvement of sesamoid position. Our findings may suggest the presence of intermetatarsal instability, which could limit the power of DCO in HV correction for more severe deformities and provide a mechanism for HV recurrence. Level of Evidence: Level IV, retrospective case series.


2011 ◽  
Vol 32 (11) ◽  
pp. 1058-1062 ◽  
Author(s):  
Jae-Yong Park ◽  
Hong-Geun Jung ◽  
Tae-Hoon Kim ◽  
Min-Seok Kang

Background: The premise of this study was that after the correction of hallux-metatarsophalangeal pronation, the intraoperative interphalangeal angle (HIA) increases significantly, and that an additional Akin osteotomy (AO) is often needed. Therefore, the purpose of this study was to evaluate whether HIAs in hallux valgus (HV) feet were underestimated, and to assess the need for AO during HV correction. Method: This study was conducted on 54 feet with moderate to severe HV treated from June 2007 to December 2008. HIAs and medial sesamoid subluxations (MSS) were measured initially and intraoperatively after a distal soft tissue procedure (DSTP) and proximal chevron metatarsal osteotomy (PCMO). An intraoperative technique was used to evaluate the incongruency of the metatarsophalangeal joint (MTPJ) to determine the need for additional Akin osteotomy. Results: After performing DSTP and PCMO, HIAs significantly increased from an average of 9 to 13.3 degrees and MSS reduced from average grade 2.5 to 0.5 ( p < 0.05). Akin ostetomy was added in 44 (81%) feet. After an average followup of 13.2 months in Akin group, average VAS pain score decreased from 5.7 to 1.2 and average AOFAS score increased from 57.8 to 90.2 ( p < 0.05). Final hallux MTPJ dorsiflexion in the Akin group was significantly larger than in the without-Akin group ( p < 0.05). Conclusion: Average HIA significantly increased after DSTP and PCMO for moderate to severe HV necessitating additional Akin osteotomy, to achieve ideal HV correction and, to preserve MTPJ motion. Level of Evidence: IV, Case Series


2020 ◽  
Vol 14 (3) ◽  
pp. 278-284
Author(s):  
Luiz Lara ◽  
Lúcio Torres Filho ◽  
Gabriel Cervone ◽  
Rafael Viana ◽  
Glaucia Bordignon ◽  
...  

Objective: To analyze outcomes of hallux valgus surgical correction using the Reverdin-Isham technique by means of clinical and radiographic studies. Methods: We retrospectively assessed 43 feet (38 patients) with moderate to severe hallux valgus treated from June 2009 to July 2014. Mean age at surgery was 59 years; mean postoperative follow-up time was 79 months. Patients were assessed at pre- and postoperative periods both functionally, by the American Orthopaedic Foot and Ankle Society (AOFAS) score, and radiographically, by the hallux valgus angle (HVA), intermetatarsal angle (IMA), distal metatarsal articular angle (DMAA), and shortening of 1st metatarsal bone. Results: AOFAS scores had a mean increase of 55 points. Mean HVA decreased 14.5°, whereas IMA and DMAA exhibited a mean decrease of 3.8° and 9.7°, respectively. Mean shortening of the first metatarsal bone was 3mm. Conclusion: The presented surgical technique showed to be effective to correct mild to moderate hallux valgus, resulting in appropriate angle correction angular and significant increase in AOFAS scores. Level of Evidence IV; Therapeutic Studies; Case Series.


2021 ◽  
pp. 107110072110030
Author(s):  
Matthew S. Conti ◽  
Tamanna J. Patel ◽  
Kristin C. Caolo ◽  
Joseph M. Amadio ◽  
Mark C. Miller ◽  
...  

Background: There is no consensus in the foot and ankle literature regarding how to measure pronation of the first metatarsal in patients with hallux valgus. The primary purpose of this study was to compare 2 previously published methods for measuring pronation of the first metatarsal and a novel 3-dimensional measurement of pronation to determine if different measurements of pronation are associated with each other. Methods: Thirty patients who underwent a modified Lapidus procedure for their hallux valgus deformity were included in this study. Pronation of the first metatarsal was measured on weightbearing computed tomography (WBCT) scans using the α angle with reference to the floor, a 3-dimensional computer-aided design (3D CAD) calculation with reference to the second metatarsal, and a novel method, called the triplanar angle of pronation (TAP), that included references to both the floor (floor TAP) and base of the second metatarsal (second TAP). Pearson’s correlation coefficients were used to determine if the 3 calculated angles of pronation correlated to each other. Results: Preoperative and postoperative α angle and 3D CAD had no correlation with each other ( r = 0.094, P = .626 and r = 0.076, P = .694, respectively). Preoperative and postoperative second TAP and 3D CAD also had no correlation ( r = 0.095, P = .624 and r = 0.320, P = .09, respectively). However, preoperative and postoperative floor TAP and α angle were found to have moderate correlations ( r = 0.595, P = .001 and r = 0.501, P = .005, respectively). Conclusion: The calculation of first metatarsal pronation is affected by the reference and technique used, and further work is needed to establish a consistent measurement for the foot and ankle community. Level of Evidence: Level III, retrospective cohort study.


2021 ◽  
Vol 6 (2) ◽  
pp. 247301142110085
Author(s):  
Christopher Traynor ◽  
James Jastifer

Background: Instability of the first-tarsometatarsal (TMT) joint has been proposed as a cause of hallux valgus. Although there is literature demonstrating how first-TMT arthrodesis affects hallux valgus, there is little published on how correction of hallux valgus affects the first-TMT joint alignment. The purpose of this study was to determine if correction of hallux valgus impacts the first-TMT alignment and congruency. Improvement in alignment would provide evidence that hallux valgus contributes to first-TMT instability. Our hypothesis was that correcting hallux valgus angle (HVA) would have no effect on the first-TMT alignment and congruency. Methods: Radiographs of patients who underwent first-MTP joint arthrodesis for hallux valgus were retrospectively reviewed. The HVA, 1-2 intermetatarsal angle (IMA), first metatarsal–medial cuneiform angle (1MCA), medial cuneiform–first metatarsal angle (MC1A), relative cuneiform slope (RCS), and distal medial cuneiform angle (DMCA) were measured and recorded for all patients preoperatively and postoperatively. Results: Of the 76 feet that met inclusion criteria, radiographic improvements were noted in HVA (23.6 degrees, P < .0001), 1-2 IMA (6.2 degrees, P < .0001), 1MCA (6.4 degrees, P < .0001), MC1A (6.5 degrees, P < .0001), and RCS (3.3 degrees, P = .001) comparing preoperative and postoperative radiographs. There was no difference noted with DMCA measurements (0.5 degrees, P = .53). Conclusion: Our findings indicate that the radiographic alignment and subluxation of the first-TMT joint will reduce with isolated treatment of the first-MTP joint. Evidence suggests that change in the HVA can affect radiographic alignment and subluxation of the first-TMT joint. Level of Evidence: Level IV, retrospective case series.


2018 ◽  
Vol 3 (3) ◽  
pp. 247301141879007 ◽  
Author(s):  
Pablo Wagner ◽  
Emilio Wagner

Background: Hallux valgus deformity consists of a lateral deviation of the great toe, metatarsus varus, and pronation of the first metatarsal. Most osteotomies only correct varus, but not the pronation of the metatarsal. Persistent postoperative pronation has been shown to increase deformity recurrence and have worse functional outcomes. The proximal rotational metatarsal osteotomy (PROMO) technique reliably corrects pronation and varus through a stable osteotomy, avoiding fusing any healthy joints. The objective of this research is to show a prospective series of the PROMO technique. Methods: Twenty-five patients (30 feet) were operated with the PROMO technique. The sample included 22 women and 3 men, average age 46 years (range 22-59), for a mean prospective follow-up of 1 year (range 9-14 months). Inclusion criteria included symptomatic hallux valgus deformities, absence of severe joint arthritis, or inflammatory arthropathies, with a metatarsal malrotation of 10 degrees or more, with no tarsometatarsal subluxation or arthritis on the anteroposterior or lateral foot radiograph views. The mean preoperative and postoperative Lower Extremity Functional Scale (LEFS) score, metatarsophalangeal angle, intermetatarsal angle, metatarsal malrotation, complications, satisfaction, and recurrence were recorded. Results: The mean preoperative and postoperative LEFS scores were 56 and 73. The median pre-/postoperative metatarsophalangeal angle was 32.5/4 degrees and the intermetatarsal angle 15.5/5 degrees. The metatarsal rotation was satisfactorily corrected in 24 of 25 patients. An Akin osteotomy was needed in 27 of 30 feet. All patients were satisfied with the surgery, and no recurrence or complications were found. Conclusions: PROMO is a reliable technique, with good short-term results in terms of angular correction, satisfaction, and recurrence. Long-term studies are needed to determine if a lower hallux recurrence rate occurs with the correction of metatarsal rotation in comparison with conventional osteotomies. Level of evidence: IV, prospective case series.


2020 ◽  
pp. 107110072097609
Author(s):  
Eran Tamir ◽  
Michael Tamar ◽  
Moshe Ayalon ◽  
Shlomit Koren ◽  
Noam Shohat ◽  
...  

Background: Distal metatarsal osteotomy has been used to alleviate plantar pressure caused by anatomic deformities. This study’s purpose was to examine the effect of minimally invasive floating metatarsal osteotomy on plantar pressure in patients with diabetic metatarsal head ulcers. Methods: We performed a retrospective case series of prospectively collected data on 32 patients with diabetes complicated by plantar metatarsal head ulcers without ischemia. Peak plantar pressure and pressure time integrals were examined using the Tekscan MatScan prior to surgery and 6 months following minimally invasive floating metatarsal osteotomy. Patients were followed for complications for at least 1 year. Results: Peak plantar pressure at the level of the osteotomized metatarsal head decreased from 338.1 to 225.4 kPa ( P < .0001). The pressure time integral decreased from 82.4 to 65.0 kPa·s ( P < .0001). All ulcers healed within a mean of 3.7 ± 4.2 weeks. There was 1 recurrence (under a hypertrophic callus of the osteotomy) during a median follow-up of 18.3 months (range, 12.2-27). Following surgery, adjacent sites showed increased plantar pressure and 4 patients developed transfer lesions (under an adjacent metatarsal head); all were managed successfully. There was 1 serious adverse event related to surgery (operative site infection) that resolved with antibiotics. Conclusion: This study showed that the minimally invasive floating metatarsal osteotomy successfully reduced local plantar pressure and that the method was safe and effective, both in treatment and prevention of recurrence. Level of Evidence: Level III, retrospective case series of prospectively collected data.


Sign in / Sign up

Export Citation Format

Share Document