Effect of Displacement Degree of Distal Chevron Osteotomy on Metatarsal Stress: A Finite Element Method

Background: The stress of foot bone can effectively evaluate the functional damage caused by foot deformity and the results of operation. In this study, the finite element method was used to investigate the degree of displacement of distal chevron osteotomy on metatarsal stress and metatarsophalangeal joint load; Methods: Four finite element models of displacement were established by using the CT images of a patient with moderate hallux valgus (hallux valgus angle and intermetatarsal angle were 26.74° and 14.09°, respectively), and the validity of the model was verified. Each finite element model consisted of bones and various cartilage structures, ligaments, and plantar fascia, as well as encapsulated soft tissue. Except for soft tissue, the material properties of other parts were isotropic linear elastic material, and the encapsulated soft tissue was set as nonlinear hyperelastic material. The mesh was tetrahedral mesh. Link elements were used in ligament and plantar fascia. A ground reaction force with a half-body weight was applied at the bottom of the floor to simulate the ground reaction when standing. The upper surfaces of the encapsulated soft tissue, distal tibia, and distal fibula were fixed. The stress distribution of metatarsals and the stress of cartilage of the first metatarsophalangeal joint were compared and analyzed; Results: Compared with the hallux valgus without osteotomy, the stress of the first metatarsals and second metatarsals of 2–4 mm decreased, and the stress of the interarticular cartilage of the first metatarsophalangeal joint with 4 mm was reduced. In the case of 6 mm, the stress value between the first metatarsal and the first metatarsophalangeal joint increased, and 4 mm was the most suitable distance; Conclusions: Compared with the hallux valgus without osteotomy, the stress of the first metatarsals and second metatarsals of 2–4 mm decreased, and the stress of the interarticular cartilage of the first metatarsophalangeal joint with 4 mm was reduced. In the case of 6 mm, the stress value between the first metatarsal and the first metatarsophalangeal joint increased, and 4 mm was the most suitable distance. For the degree of displacement of the distal chevron osteotomy, the postoperative stability and the stress distribution of metatarsal bone should be considered. Factors such as hallux valgus angle, intermetatarsal angle, patient’s age, body weight, and metatarsal width should be considered comprehensively. The factors affecting osteotomy need to be further explored. The degree of displacement of osteotomy can be evaluated by FE method before the operation, and the most suitable distance can be obtained.

Comparative analysis of the validity of goniometric, inclinometric, and radiographic methods to measure ankle joint dorsiflexion

Background. The search for an optimal method to assess the amplitude of ankle joint dorsiflexion remains topical for scientific discussions. The purpose of the research was to analyze the validity of goniometric and inclinometric methods for measuring the scope of ankle joint (AJ) dorsiflexion compared to radiological data. Materials and methods. The research included 25 healthy and physically active people (50 ankle joints), 18 men and 7 women with an average age of 25.8 ± 5.2 years; their mean body mass index was 25.01 ± 5.01 kg/m2. Ankle dorsiflexion measures were obtained in a weight-bearing lunge position using a double-plane goniometer and inclinometer, then compared with X-ray data. The measurement results were evaluated by descriptive statistics. Results. Mean values of AJ dorsiflexion obtained with a double-plane goniometer were 37.62 ± 5.56°; with an inclinometer — 40.61 ± 5.15°; radiological results — 23.69 ± 7.25°. Their difference was significant (p < 0.001). The mean variability index for the radiological method was 0.31 prevailing over goniometric (0.15) and inclinometric (0.13) methods (p < 0.001). X-ray ima-ging of a weight-bearing AJ at its maximum dorsiflexion raises the indicator of a talus-first metatarsal angle. Conclusions. The values of the dorsiflexion angle parameters of an AJ, measured using goniometric and inclinometric methods, significantly exceed those obtained by X-ray imaging. Higher variation index for radiological imaging demonstrates better reproducibility of inclinometry and goniometry when evaluating AJ dorsiflexion. A weight-bearing AJ radiogram at maximum extended position demonstrates an increase in a talus-first metatarsal angle compared to normal values that should be considered when interpreting the results of X-ray imaging of an AJ dorsiflexion.

Radiographic Factors Associated with Painful Callosities After Forefoot Surgery in Patients with Rheumatoid Arthritis

ABSTRACT Objectives Operative procedures for rheumatoid forefoot deformities have gradually changed from arthrodesis or resection arthroplasty to joint-preserving surgery. Though joint-preserving arthroplasty has yielded good outcomes, painful plantar callosities may occur postoperatively. This study aimed to reveal the radiographic factors associated with painful callosities after joint-preserving surgery for forefoot deformities in patients with rheumatoid arthritis (RA). Methods We retrospectively evaluated 166 feet in 133 patients with RA who underwent forefoot joint-preserving arthroplasty, including proximal rotational closing-wedge osteotomies of the first metatarsal, between January 2012 and December 2015. Logistic regression analysis was performed with the objective variable set as the presence/absence of painful plantar callosities at the final observation and the explanatory variables set as several radiographic factors including postoperative relative first metatarsal length (RML), amount of dorsal dislocation of the fifth metatarsal (5DD), and arc failure of the lesser toes. Results At the final follow-up, forty-two of the 166 feet (25.3%) had painful callosities under the metatarsal heads postoperatively. Logistic regression analysis showed that the RML, 5DD, and lesser toes’ arc failure were significantly associated with painful callosities. Conclusions We identified RML, 5DD, and arc failure of the lesser toes were associated with painful plantar callosities after the surgery.

Prolonged Use of a Continuous Peripheral Nerve Block Catheter for Analgesia after Pediatric Foot and Ankle Surgery

Continuous peripheral nerve blocks (CPNB) have a variety of indications and have been shown to be a safe and effective means of minimizing pain postoperatively. Early studies have indicated duration of catheter use greater than 48 hours as a main contributor to infection risk in CPNBs. Recent studies, though, have suggested that the risk of infection does not increase until 4 days after insertion. In the following case report, we recount our experience in using a continuous popliteal-sciatic peripheral nerve block for postoperative pain control in a pediatric patient following calcaneal and first metatarsal osteotomy. The catheter remained in place for 65 hours postoperatively without signs of local inflammation or infection. The prolonged CPNB use resulted in a significant decrease in postoperative opioid use and pain and increase in patient satisfaction when compared to the same procedure done one year prior on the opposite foot.

Reliability of coronal plane rotation measurements in the medial column of the foot: a cadaveric study

Objective: To assess interobserver reliability of previously described coronal plane rotation measurements of medial column bones and to assess their ability to accurately quantify changes in rotational profile. Methods: Two cadaveric below-knee specimens were implanted with pins in each bone of the medial column. Weight-bearing computed tomography (CT) scans were acquired in a simulated standing position under neutral, supinated, and pronated conditions. For each specimen and condition, 2 observers measured the coronal plane rotation of the navicular, medial cuneiform, first metatarsal base, shaft, and head, and proximal phalanx of the hallux as previously described. The rotation of each pin was measured relative to the ground in the coronal plane for each condition. These measurements were defined as benchmarks for the rotational profile of each bone. The correlation between these benchmarks and direct bone measurements was then assessed. Intraclass correlation coeficiente was used to assess interobserver reliability. Pearson’s coefficient was used to evaluate correlations. Results: The interobserver reliability of direct bone measurements ranged from 0.98 to 0.99. Correlations between pin rotation and direct measurements ranged from ρ=0.87 to 0.99 across the neutral, supinated, and pronated conditions. Conclusion: Coronal plane rotation measurements of medial column bones described in this study are reliable tools. Level of Evidence III; Case-Control Study.

The Association of Crista Volume With Sesamoid Position as Measured From 3D Reconstructions of Weightbearing CT Scans

Background: Malposition of the sesamoids relative to the first metatarsal head may relate to intersesamoid crista underdevelopment or erosion. Using 3-dimensional models created from weightbearing CT (WBCT) scans, the current work examined crista volume and its relationship to first metatarsal pronation and sesamoid station. Methods: Thirty-eight hallux valgus (HV) patients and 10 normal subjects underwent weightbearing or simulated WBCT imaging. The crista was outlined by the inferior articular surface, and a line was drawn to connect the lowest point of each sulcus on either side of the intersesamoidal crista throughout the length of the crista. The volume was calculated. Sesamoid station and first metatarsal pronation were calculated from the 3D reconstructions. The mean crista volumes between HV and normal patients were statistically compared, as were the crista volume and pronation angle between sesamoid stations. Results: The mean crista volume in HV patients was 80.10 ± 35 mm3 and in normal subjects was 150.64 ± 24 mm3, which differed significantly between the 2 groups ( P < .001). Mean crista volumes were found to be statistically significantly different between the sesamoid stations ( P < .001) with decreasing crista volumes significantly and strongly correlated with increasing sesamoid station ( r = −0.80, P < .001). There was no difference in the mean pronation angle between the 4 sesamoid stations ( P = .37). The pronation angle was not associated with crista volume ( P = .52). Conclusion: HV patients have lower mean crista volume than normal patients. Crista volume is correlated with sesamoid station. Pronation of the first metatarsal was not associated with crista volume. Clinical Relevance: Crista volume may offer an additional determinant for the severity of hallux valgus.

Average 4-Year Outcomes of Distal Oblique First Metatarsal Osteotomy for Stage 1 to 3 Hallux Rigidus

Background: Hallux rigidus is the second most frequent pathology of the first ray. Surgical options for degenerative metatarsophalangeal joint disease are either joint destructive or conservative procedures. The hypothesis was that oblique distal shortening osteotomy of the first metatarsal is an effective conservative technique for the management of stage 1 to 3 hallux rigidus. Methods: We conducted a retrospective cohort study of 87 feet with Coughlin and Shurnas’s stage 1-3 hallux rigidus, operated between 2009 and 2019. The cohort consisted in 72 patients (87 feet) with an average age of 57±9 (30/79) years; 22 of 87 (25.3%) feet had the first metatarsal surgery performed in isolation; 65 of 87 (74.7%) had concomitant forefoot procedures, including 31 of 87 (35.6%) with Akin phalangeal osteotomies and 34 of 87 (39.1%) with Moberg phalangeal osteotomies. We evaluated the American Orthopaedic Foot & Ankle Society (AOFAS) Scale, subjective satisfaction, joint amplitudes, shortening rate, and occurrence of postoperative complications with a mean follow-up of 51 months (16/134). Results: The AOFAS score increased from 54.2±11.3 (25/70) preoperatively to 92.2±7.8 (62/100) postoperatively ( P < .001). Patients reported excellent or good outcome in 95.4% of cases. The 40-point self-reported pain subscale score improved from 19.6 (± 10.0) to 37.4 (± 5.4), P < .001. The overall range of motion increased from 61±21 (20/110) degrees to 69±17 (35/120) degrees ( P < .001). The mean first metatarsal shortening rate (SRpo) was 9.6%. Neither the Coughlin grade, the metatarsal index, or the SRpo influenced the AOFAS score. At 6-month follow-up, 15 patients had transfer metatarsalgia compared with 5 at last follow-up without requiring another surgical procedure. The risk was not significantly different according to Coughlin's stage, preoperative metatarsal index, or SRpo. Conclusion: Oblique distal osteotomy of the first metatarsal for stage 1-3 hallux rigidus, often in combination with other first ray procedures, performed well during our follow-up time period, with a high subjective satisfaction rate and few complications. Level of Evidence: Level III, retrospective cohort study.

Foot and ankle functions and deformities focus on posterior tibial tendon dysfunction using magnetic resonance imaging in patients with rheumatoid arthritis

ABSTRACT Objectives Posterior tibial tendon dysfunction (PTTD) affects the support of the medial longitudinal arch and stability of the hindfoot. The purpose of this study was to assess the relationships of PTTD with foot and ankle functions and foot deformities in patients with rheumatoid arthritis (RA). Methods A total of 129 patients (258 feet) who underwent magnetic plain and contrast-enhanced magnetic resonance imaging were enrolled in this study. Positive magnetic resonance imaging findings were defined as tenosynovitis and incomplete and complete rupture of the posterior tibial tendon. Foot and ankle functions were assessed using the Japanese Society for Surgery of the Foot standard rating system for the RA foot and ankle scale (JSSF-RA) and self-administered foot evaluation questionnaire. Plain radiographs were examined for the hallux valgus angle, first metatarsal and second metatarsal angle, lateral talo-first metatarsal angle, and calcaneal pitch angle. Results PTTD was associated with motion in the JSSF-RA (p = .024), activities of daily living in JSSF-RA (p = .017), and pain and pain-related factors in the self-administered foot evaluation questionnaire (p = .001). The calcaneal pitch angle was significantly lower in the feet with PTTD than in those without PTTD (median: 16.2° vs. 18.0°; p = .007). Conclusions The present study shows that PTTD was associated with foot and ankle functions and flatfoot deformity. Thus, a better understanding of PTTD in patients with RA is important for the management of foot and ankle disorders in clinical practice.

Radiographic and Clinical Results of Minimally Invasive Chevron Akin Osteotomy for Moderate to Severe Hallux Valgus Deformities

Background: Few studies have reported results of minimally invasive chevron Akin osteotomy (MICA) for moderate to severe hallux valgus correction. This study aims to evaluate MICA for moderate to severe hallux valgus radiographically and clinically. Methods: Forty feet were prospectively reviewed. Twenty-eight feet (70%) had a severe deformity (hallux valgus angle (HVA) ≥40° and/or first intermetatarsal angle (IMA) ≥18°). We measured HVA, IMA, lateral shape of the metatarsal head (round sign), tibial sesamoid position, first metatarsal shortening on anteroposterior weightbearing radiographs, and inclination angle of first metatarsal on lateral weightbearing radiographs. We evaluated the Japanese Society for Surgery of the Foot hallux scale and Self-Administered Foot Evaluation Questionnaire responses preoperatively and at the most recent follow-up. Results: All measurements except shortening and inclination angle improved significantly. Both clinical scale and all subscores significantly improved. Conclusions: MICA improved moderate to severe hallux valgus both radiographically and clinically. Level of Evidence: Level IV: case series