Effect of the Modified Lapidus Procedure on Pronation of the First Ray in Hallux Valgus

Background: Hallux valgus (HV) is a triplanar deformity of the first ray including pronation of the first metatarsal with subluxation of the sesamoids. The purpose of this study was to investigate if a first tarsometatarsal fusion (modified Lapidus technique), without preoperative knowledge of pronation measured on weightbearing computed tomographic (CT) scans, changed pronation of the first metatarsal and determine if reduction of the sesamoids was correlated with changes in first metatarsal pronation. Methods: Thirty-one feet in 31 patients with HV who underwent a modified Lapidus procedure had preoperative and at least 5-month postoperative weightbearing CT scans and radiographs. Differences in preoperative and postoperative pronation of the first metatarsal using a 3-dimensional computer-aided design, HV angle, and intermetatarsal angle (IMA) were calculated using Wilcoxon signed-rank tests. After dividing patients into groups based on sesamoid station, Kruskal-Wallis H tests were used to compare first metatarsal pronation between the groups. Results: The mean preoperative and postoperative pronation of the first metatarsal was 29.0 degrees (range 15.8-51.1, SD 8.7) and 20.2 degrees (range 10.4-32.6, SD 5.4), respectively, which was a mean change in pronation of the first ray of −8.8 degrees ( P < .001). There was no difference in pronation of the first ray when stratified by postoperative sesamoid position ( P > .250). The average preoperative and postoperative IMA was 16.7 degrees (SD 3.2) and 8.8 degrees (SD 2.8), which demonstrated a significant change ( P < .001). Conclusions: The modified Lapidus procedure was an effective tool to change pronation of the first ray. Reduction of the sesamoids was not associated with postoperative first metatarsal pronation. Level of Evidence: Level IV, case series.

Download Full-text

Three-Dimensional Analysis of the First Metatarsal Bone in Minimally Invasive Distal Linear Metatarsal Osteotomy for Hallux Valgus

Foot & Ankle International ◽

10.1177/1071100719875222 ◽

2019 ◽

Vol 41 (1) ◽

pp. 84-93 ◽

Cited By ~ 1

Author(s):

Hiroyuki Seki ◽

Satoshi Oki ◽

Yasunori Suda ◽

Kenichiro Takeshima ◽

Tetsuro Kokubo ◽

...

Keyword(s):

Minimally Invasive ◽

Hallux Valgus ◽

Morphological Changes ◽

Case Series ◽

Metatarsal Bone ◽

Ct Scans ◽

Metatarsal Osteotomy ◽

Level Of Evidence ◽

3 Dimensional ◽

First Metatarsal

Background: Modified Bösch osteotomy (distal linear metatarsal osteotomy [DLMO]) is one of the minimally invasive correctional surgeries for hallux valgus. The 3-dimensional correctional angles and distances of the first metatarsal bone in DLMO have not been clarified. The purpose of this study was to analyze the 3-dimensional postoperative morphological changes of the first metatarsal bone in DLMO. Methods: Twenty patients (30 feet) who underwent DLMO were enrolled. Preoperative plain radiographs and computed tomography (CT) scans of the feet were examined. Postoperative radiographs and CT scans were also obtained after bone union. The surface data of the pre- and postoperative first metatarsals were reconstructed from the CT data. The positions of the distal ends of the first metatarsals described with respect to the proximal ends were calculated using CT surface-matching technique. Results: The distal end of the first metatarsal after DLMO was significantly supinated (10.2 ± 6.0 degrees, P < .001), adducted (6.0 ± 11.8 degrees, P = .004), dorsiflexed (11.1 ± 10.9, P < .001), shortened (7.4 ± 2.5 mm, P < .001), elevated (2.3 ± 3.1 mm, P = .001), and laterally shifted (8.2 ± 3.0 mm, P < .001) compared to the preoperative metatarsal distal end. Supination correction demonstrated a significant correlation with adduction correction ( r = 0.659, P < .001) on correlation analyses between these parameters. Conclusion: The 3-dimensional corrections of the first metatarsal bone after DLMO were evaluated. Pronation and abduction were successfully corrected. Furthermore, adduction correction might be an important factor affecting correction of pronation. Level of Evidence: Level IV, retrospective case series.

Download Full-text

Correlation of Different Methods of Measuring Pronation of the First Metatarsal on Weightbearing CT Scans

Foot & Ankle International ◽

10.1177/10711007211003090 ◽

2021 ◽

pp. 107110072110030

Author(s):

Matthew S. Conti ◽

Tamanna J. Patel ◽

Kristin C. Caolo ◽

Joseph M. Amadio ◽

Mark C. Miller ◽

...

Keyword(s):

Hallux Valgus ◽

Computer Aided Design ◽

Foot And Ankle ◽

Level Of Evidence ◽

3 Dimensional ◽

3D Cad ◽

First Metatarsal ◽

Hallux Valgus Deformity ◽

Second Metatarsal ◽

Α Angle

Background: There is no consensus in the foot and ankle literature regarding how to measure pronation of the first metatarsal in patients with hallux valgus. The primary purpose of this study was to compare 2 previously published methods for measuring pronation of the first metatarsal and a novel 3-dimensional measurement of pronation to determine if different measurements of pronation are associated with each other. Methods: Thirty patients who underwent a modified Lapidus procedure for their hallux valgus deformity were included in this study. Pronation of the first metatarsal was measured on weightbearing computed tomography (WBCT) scans using the α angle with reference to the floor, a 3-dimensional computer-aided design (3D CAD) calculation with reference to the second metatarsal, and a novel method, called the triplanar angle of pronation (TAP), that included references to both the floor (floor TAP) and base of the second metatarsal (second TAP). Pearson’s correlation coefficients were used to determine if the 3 calculated angles of pronation correlated to each other. Results: Preoperative and postoperative α angle and 3D CAD had no correlation with each other ( r = 0.094, P = .626 and r = 0.076, P = .694, respectively). Preoperative and postoperative second TAP and 3D CAD also had no correlation ( r = 0.095, P = .624 and r = 0.320, P = .09, respectively). However, preoperative and postoperative floor TAP and α angle were found to have moderate correlations ( r = 0.595, P = .001 and r = 0.501, P = .005, respectively). Conclusion: The calculation of first metatarsal pronation is affected by the reference and technique used, and further work is needed to establish a consistent measurement for the foot and ankle community. Level of Evidence: Level III, retrospective cohort study.

Download Full-text

First-Tarsometatarsal Joint Alignment After First-Metatarsophalangeal Joint Arthrodesis for Hallux Valgus

Foot & Ankle Orthopaedics ◽

10.1177/24730114211008514 ◽

2021 ◽

Vol 6 (2) ◽

pp. 247301142110085

Author(s):

Christopher Traynor ◽

James Jastifer

Keyword(s):

Hallux Valgus ◽

Case Series ◽

Metatarsophalangeal Joint ◽

Retrospective Case ◽

Level Of Evidence ◽

First Metatarsophalangeal Joint ◽

First Metatarsal ◽

Metatarsal Angle ◽

Medial Cuneiform ◽

Radiographic Alignment

Background: Instability of the first-tarsometatarsal (TMT) joint has been proposed as a cause of hallux valgus. Although there is literature demonstrating how first-TMT arthrodesis affects hallux valgus, there is little published on how correction of hallux valgus affects the first-TMT joint alignment. The purpose of this study was to determine if correction of hallux valgus impacts the first-TMT alignment and congruency. Improvement in alignment would provide evidence that hallux valgus contributes to first-TMT instability. Our hypothesis was that correcting hallux valgus angle (HVA) would have no effect on the first-TMT alignment and congruency. Methods: Radiographs of patients who underwent first-MTP joint arthrodesis for hallux valgus were retrospectively reviewed. The HVA, 1-2 intermetatarsal angle (IMA), first metatarsal–medial cuneiform angle (1MCA), medial cuneiform–first metatarsal angle (MC1A), relative cuneiform slope (RCS), and distal medial cuneiform angle (DMCA) were measured and recorded for all patients preoperatively and postoperatively. Results: Of the 76 feet that met inclusion criteria, radiographic improvements were noted in HVA (23.6 degrees, P < .0001), 1-2 IMA (6.2 degrees, P < .0001), 1MCA (6.4 degrees, P < .0001), MC1A (6.5 degrees, P < .0001), and RCS (3.3 degrees, P = .001) comparing preoperative and postoperative radiographs. There was no difference noted with DMCA measurements (0.5 degrees, P = .53). Conclusion: Our findings indicate that the radiographic alignment and subluxation of the first-TMT joint will reduce with isolated treatment of the first-MTP joint. Evidence suggests that change in the HVA can affect radiographic alignment and subluxation of the first-TMT joint. Level of Evidence: Level IV, retrospective case series.

Download Full-text

Radiographic Impact of Lapidus, Proximal Lateral Closing Wedge Osteotomy, and Suture Button Procedures on First Ray Length and Dorsiflexion for Hallux Valgus

Foot & Ankle International ◽

10.1177/1071100720925438 ◽

2020 ◽

Vol 41 (8) ◽

pp. 964-971 ◽

Cited By ~ 1

Author(s):

Ian M. Foran ◽

Nasima Mehraban ◽

Stephen K. Jacobsen ◽

Daniel D. Bohl ◽

Johnny Lin ◽

...

Keyword(s):

Hallux Valgus ◽

Wedge Osteotomy ◽

Level Of Evidence ◽

Closing Wedge Osteotomy ◽

First Metatarsal ◽

Suture Button ◽

Closing Wedge ◽

Radiographic Measurements ◽

Valgus Angle ◽

First Ray

Background: Shortening and dorsiflexion of the first metatarsal are known potential side effects of metatarsal osteotomies for hallux valgus (HV) with the potential to cause transfer metatarsalgia. We compared the effect of the first tarsometatarsal joint arthrodesis (Lapidus procedure), proximal lateral closing wedge osteotomy (PLCWO), and intermetatarsal suture button fixation procedures on the length and dorsiflexion of the first ray. Methods: We retrospectively evaluated 105 feet in 99 patients with 30 weeks of follow-up. The average age was 54 years. Seventy-four feet had a Lapidus procedure, 12 had a PLCWO, and 19 had intermetatarsal suture button fixation. Digital radiographic measurements were made for the pre- and postoperative hallux valgus angle (HVA) and intermetatarsal angle (IMA), absolute and relative shortening of the first ray, and dorsiflexion. Results: Preoperative HVA and IMA did not differ between treatment groups ( P > .05 for each). Similar corrections of HVA (30.5-13.5 degrees) were achieved between all groups ( P > .05). The IMA was improved more in the Lapidus group (14.3-6.5 degrees) compared with the suture button fixation group (14.2-8.1 degrees) ( P = .045). There were significant differences in the change in absolute first cuneiform–metatarsal length (FCML) between the Lapidus (–1.6 mm), PLCWO (–2.3 mm), and intermetatarsal suture button fixation (+1.9 mm) procedure ( P = .004). There were also significant differences in relative first metatarsal shortening between the Lapidus (0.1 mm relative shortening), PLCWO (1.1 mm relative shortening), and intermetatarsal suture button fixation (1.3 mm lengthening) procedure ( P < .001). The average dorsiflexion differed between the Lapidus (1.8 degrees) and suture button fixation (0.4 degrees) groups ( P = .004). Conclusion: Intermetatarsal suture button fixation relatively lengthened the first ray, the Lapidus procedure maintained length, and the PLCWO relatively and absolutely shortened it. Dorsiflexion may be higher with the Lapidus and osteotomy procedures. Level of Evidence: Level III, retrospective comparative series.

Download Full-text

Multicenter Early Radiographic Outcomes of Triplanar Tarsometatarsal Arthrodesis With Early Weightbearing

Foot & Ankle International ◽

10.1177/1071100719847700 ◽

2019 ◽

Vol 40 (8) ◽

pp. 955-960 ◽

Cited By ~ 9

Author(s):

Justin J. Ray ◽

Jennifer Koay ◽

Paul D. Dayton ◽

Daniel J. Hatch ◽

Bret Smith ◽

...

Keyword(s):

Hallux Valgus ◽

Case Series ◽

Retrospective Case ◽

Recurrence Rates ◽

Level Of Evidence ◽

Radiographic Outcomes ◽

Valgus Angle ◽

First Ray ◽

Akin Osteotomy

Background:Hallux valgus is a multiplanar deformity of the first ray. Traditional correction methods prioritize the transverse plane, a potential factor resulting in high recurrence rates. Triplanar first tarsometatarsal (TMT) arthrodesis uses a multiplanar approach to correct hallux valgus in all 3 anatomical planes at the apex of the deformity. The purpose of this study was to investigate early radiographic outcomes and complications of triplanar first TMT arthrodesis with early weightbearing.Methods:Radiographs and charts were retrospectively reviewed for 57 patients (62 feet) aged 39.7 ± 18.9 years undergoing triplanar first TMT arthrodesis at 4 institutions between 2015 and 2017. Patients were allowed early full weightbearing in a boot walker. Postoperative radiographs were compared with preoperative radiographs for hallux valgus angle (HVA), intermetatarsal angle (IMA), tibial sesamoid position (TSP), and lateral round sign. Any complications were recorded.Results:Radiographic results demonstrated significant improvements in IMA (13.6 ± 2.7 degrees to 6.6 ± 1.9 degrees), HVA (24.2 ± 9.3 degrees to 9.7 ± 5.1 degrees), and TSP (5.0 ± 1.3 to 1.9 ± 0.9) from preoperative to final follow-up ( P < .001). Lateral round sign was present in 2 of 62 feet (3.2%) at final follow-up compared with 52 of 62 feet (83.9%) preoperatively. At final follow-up, recurrence was 3.2% (2/62 feet), and the symptomatic nonunion rate was 1.6% (1/62 feet). Two patients required hardware removal, and 2 patients required additional Akin osteotomy.Conclusion:Early radiographic outcomes of triplanar first TMT arthrodesis with early weightbearing were promising with low recurrence rates and maintenance of correction.Level of Evidence:Level IV, retrospective case series.

Download Full-text

Effect on Foot Width With Triplanar Tarsometatarsal Arthrodesis for Hallux Valgus

Foot & Ankle Orthopaedics ◽

10.1177/2473011420934804 ◽

2020 ◽

Vol 5 (3) ◽

pp. 247301142093480

Author(s):

Justin Vaida ◽

Justin J. Ray ◽

Taylor L. Shackleford ◽

William T. DeCarbo ◽

Daniel J. Hatch ◽

...

Keyword(s):

Soft Tissue ◽

Functional Outcome ◽

Hallux Valgus ◽

Metatarsal Head ◽

Level Of Evidence ◽

3 Dimensional ◽

First Metatarsal ◽

Institutional Review ◽

Retrospective Comparative Study ◽

Width Reduction

Background: Foot width reduction is a desirable cosmetic and functional outcome for patients with hallux valgus. Triplanar first tarsometatarsal (TMT) arthrodesis could achieve this goal by 3-dimensional correction of the deformity. The aim of this study was to evaluate changes in bony and soft tissue width in patients undergoing triplanar first TMT arthrodesis. Methods: After receiving Institutional Review Board approval, charts were retrospectively reviewed for patients undergoing triplanar first TMT arthrodesis for hallux valgus at 4 institutions between 2016 and 2019. Patients who underwent concomitant first metatarsal head osteotomies (eg, Silver or Chevron) or fifth metatarsal osteotomies were excluded. Preoperative and postoperative anteroposterior weightbearing radiographs were compared to evaluate for changes in bony and soft tissue width. One hundred forty-eight feet from 144 patients (48.1 ± 15.7 years, 92.5% female) met inclusion criteria. Results: Preoperative osseous foot width was 96.2 mm, compared to 85.8 mm postoperatively ( P < .001). Preoperative soft tissue width was 106.6 mm, compared to 99.3 mm postoperatively ( P < .001). Postoperatively, patients had an average 10.4 ± 4.0 mm reduction (10.8% reduction) in osseous width and average 7.3 ± 4.0 mm reduction (6.8% reduction) in soft tissue width. Conclusions: Triplanar first TMT arthrodesis reduced both osseous and soft tissue foot width, providing a desirable cosmetic and functional outcome for patients with hallux valgus. Future studies are needed to determine if patient satisfaction and outcome measures correlate with reductions in foot width. Level of evidence: Level III, retrospective comparative study

Download Full-text

Modified osteotomy with elevation of the first metatarsal

Scientific Journal of the Foot & Ankle ◽

10.30795/scijfootankle.2018.v12.784 ◽

2018 ◽

Vol 12 (2) ◽

pp. 140-144

Author(s):

Daniel Kamura Bueno ◽

Rafael Trevisan Ortiz ◽

Tarsis Padula Dos Santos ◽

Rafael Barban Sposeto ◽

Rodrigo Sousa Macedo ◽

...

Keyword(s):

Case Series ◽

Technical Difficulty ◽

Foot Deformities ◽

Modified Technique ◽

Level Of Evidence ◽

Radiographic Findings ◽

First Metatarsal ◽

Screw Breakage ◽

First Ray ◽

And Gender

Objective: The main objective of this study is to describe the preliminary results of modified osteotomy with elevation of the first metatarsal to repair cavovarus foot deformities. Methods: In a five-case series, radiographic findings related to the modified osteotomy with elevation of the first ray were analysed.Results: Five patients who underwent a modified osteotomy with elevation were followed up for a minimum of six months. One hundred percent consolidation rates were observed, with no complications related to the materials, such as screw breakage, screw loosening and/or pseudoarthrosis (0% of the cases), regardless of age and gender. Conclusion: The modified technique generates an osteotomy plane that is more horizontal, reducing the technical difficulty and resulting in less risk of loss of fixation during passage of the screw. Using a single screw for fixation reduces the cost of the procedure and pseudarthrosis rates. Level of Evidence IV; Therapeutic Studies; Case series.

Download Full-text

Shortening of first metatarsalia after ReveL procedure depends on the osteotomy angle

Foot & Ankle Orthopaedics ◽

10.1177/2473011417s000397 ◽

2017 ◽

Vol 2 (3) ◽

pp. 2473011417S0003

Author(s):

Arnd Viehöfer ◽

Stephan Wirth ◽

Felix Waibel ◽

Philipp Fürnstahl

Keyword(s):

Hallux Valgus ◽

Valgus Deformity ◽

Clinical Impact ◽

Ct Scans ◽

Dimensional Model ◽

Intermetatarsal Angle ◽

3 Dimensional ◽

Hallux Valgus Deformity ◽

First Ray ◽

Severe Hallux Valgus

Category: Midfoot/Forefoot Introduction/Purpose: Recent studies have shown that Hallux valgus deformity can lead to transfermetatarsalgia due to an impairment and relative shortening of the first ray. During ReveL osteotomy the relative shortening of the MT I is not addressed. Furthermore, a posterior deviation of the osteotomy angle results in additional iatrogenic shortening of the MT I and might favor postoperative transfermetatarsalgia. Methods: A 3-dimensional model of a foot was obtained from CT scans of a cadaveric foot. The MT I of the 3-dimensional model was then pivoted medially to simulate a severe hallux valgus deformity of an intermetatarsal angle (IMA) of 18° and an intermediate hallux valgus deformity of an IMA of 13°. A ReveL operation was simulated to correct the IMA to 8° for the severe and the intermediate Hallux valgus. Therefore the osteotomy angle in the coronal plane (f=0) was chosen perpendicular to the axis of the second metatarsalia. Afterwards the length of MT I was measured. This procedure was repeated for an posterior altered osteotomy angle (f = 5°,10°, 15° and 20°). Results: The change in MT I length resulting from an osteotomy perpendicular to the axis of MT II was 0.6 mm for a severe hallux valgus (IMA correction from 18° to IMA 8°) and 0.3 mm for a moderate hallux valgus (IMA 13° to IMA 8°). A posterior deviation of the osteotomy angle led to additional shortening (max. 2.9 mm) with a total shortening of up to 3.5 mm (Figure 3). To avoid any shortening of MT I an osteotomy slightly pointing anterior (negative f) of 3.5° (IMA change of 10°) and 3° (IMA change of 5°) was found. Conclusion: ReveL procedure led only to a maximum shortening of 3.5 mm for a posterior deviation of 20°. Considering recently described MT I length cut off values of 2-3 mm for avoiding transfermetatarsalgia the osteotomy should be performed within an anterior directed cut angle of 4° and a posterior directed cut angle of 10° for the correction of a severe hallux valgus. However, further studies are needed to investigate the clinical impact of our findings.

Download Full-text

Radiographic and Clinical Results of Minimally Invasive Chevron Akin Osteotomy for Moderate to Severe Hallux Valgus Deformities

Foot & Ankle Specialist ◽

10.1177/19386400211045911 ◽

2021 ◽

pp. 193864002110459

Author(s):

Toshinori Kurashige

Keyword(s):

Minimally Invasive ◽

Hallux Valgus ◽

Inclination Angle ◽

Case Series ◽

Metatarsal Head ◽

Clinical Results ◽

Level Of Evidence ◽

First Metatarsal ◽

Akin Osteotomy ◽

Severe Hallux Valgus

Background: Few studies have reported results of minimally invasive chevron Akin osteotomy (MICA) for moderate to severe hallux valgus correction. This study aims to evaluate MICA for moderate to severe hallux valgus radiographically and clinically. Methods: Forty feet were prospectively reviewed. Twenty-eight feet (70%) had a severe deformity (hallux valgus angle (HVA) ≥40° and/or first intermetatarsal angle (IMA) ≥18°). We measured HVA, IMA, lateral shape of the metatarsal head (round sign), tibial sesamoid position, first metatarsal shortening on anteroposterior weightbearing radiographs, and inclination angle of first metatarsal on lateral weightbearing radiographs. We evaluated the Japanese Society for Surgery of the Foot hallux scale and Self-Administered Foot Evaluation Questionnaire responses preoperatively and at the most recent follow-up. Results: All measurements except shortening and inclination angle improved significantly. Both clinical scale and all subscores significantly improved. Conclusions: MICA improved moderate to severe hallux valgus both radiographically and clinically. Level of Evidence: Level IV: case series

Download Full-text

Proximal Opening Wedge Osteotomy With Distal Chevron Osteotomy of the First Metatarsal for the Treatment of Moderate to Severe Hallux Valgus

Foot & Ankle International ◽

10.1177/1071100718799079 ◽

2018 ◽

Vol 40 (1) ◽

pp. 89-97 ◽

Cited By ~ 4

Author(s):

Matthias Braito ◽

Dietmar Dammerer ◽

Philipp Hofer-Picout ◽

Gerhard Kaufmann

Keyword(s):

Wound Infection ◽

Hallux Valgus ◽

Case Series ◽

Wedge Osteotomy ◽

Metatarsal Osteotomy ◽

Level Of Evidence ◽

Opening Wedge ◽

First Metatarsal ◽

Chevron Osteotomy ◽

Severe Hallux Valgus

Background: The aim of this study was to assess radiographic and clinical outcomes after double osteotomy with proximal opening wedge first metatarsal osteotomy and first metatarsal distal chevron osteotomy in the treatment of moderate to severe hallux valgus. Methods: 33 patients (4 male, 29 female; 36 feet; average age 60.7 years) were included in the study. Radiographic and clinical outcome in terms of intermetatarsal angle (IMA), hallux valgus angle (HVA), distal metatarsal articular angle (DMAA), and the American Orthopaedic Foot & Ankle Society metatarsophalangeal-interphalangeal hallux score (AOFAS MTP-IP hallux score) were investigated at 6 weeks, 6 months, and after an average of 28 (range, 7-123) months postoperatively. Results: Preoperative IMA, HVA, and DMMA showed statistically significant improvement ( P ≤ .05) from 19.1 ± 3.8 (8.9-27.3) degrees, 45.4 ± 8.7 (25.9-60.9) degrees, and 20.8 ± 8.9 (4.5-38.0) degrees to 6.0 ± 3.3 (0.4-12.2) degrees, 9.1 ± 8.9 (–6.7 to 39.0) degrees, and 6.4 ± 5.6 (–6.8 to 21.0) degrees at last follow-up, respectively. Postoperative AOFAS MTP-IP hallux score averaged 88.1 points. Overall, 10 complications were observed: hallux varus (3 feet), hallux valgus recurrence (3 feet), nonunion (1 foot), loss of fixation (1 foot), and wound infection (2 feet). Conclusion: Proximal opening wedge first metatarsal osteotomy with distal chevron osteotomy provided powerful correction of each component of moderate to severe hallux valgus but had a substantial rate of complications in terms of over- and undercorrection, nonunion, loss of fixation, and wound infection. Level of Evidence: Level IV, case series.

Download Full-text