The anatomy of Wassel type IV-D thumb duplication

2017 ◽  
Vol 42 (5) ◽  
pp. 516-522
Author(s):  
B. He ◽  
G. Liu ◽  
G. Nan
Keyword(s):  
Proximal Phalanx ◽  
Tendon Sheath ◽  
Distal Phalanx ◽  
Level Of Evidence ◽  
Type Iv ◽  
Radial Side ◽  
Thumb Duplication ◽  
Secondary Deformity ◽  
A2 Pulley ◽  
Flexor Pollicis Longus Tendon

We describe Wassel type IV-D thumb duplication anatomy after surgery on 11 affected children (12 hands, seven boys (eight hands) and four girls). We studied the structure and course of the flexor pollicis longus tendon and its action at the joint. Four patients had secondary deformity associated with an absent A2 pulley and a tendon that clung to the radial side of a small thumb. In patients with primary deformity, the flexor tendon sheath became membranous in the A2 area and attached to neighbouring sites on the opposite side of the proximal phalanx. In the proximal A2 area, the tendon divided – one division attached on the ulnar side of the distal phalanx base; the other, the base of the radial side. There was slight ulnar angulation of the distal phalanx on the radial portion of the duplication and slight ulnar angulation on the radial portion. Level of evidence: V

Causes of secondary deformity after surgery to correct Wassel type IV-D thumb duplication

2016 ◽  
Vol 41 (7) ◽  
pp. 739-744 ◽  
Author(s):  
B. He ◽  
G. Nan
Keyword(s):  
Kirschner Wire ◽  
Incomplete Resection ◽  
Flexor Pollicis Longus ◽  
Level Of Evidence ◽  
Thenar Muscle ◽  
Type Iv ◽  
Kirschner Wire Fixation ◽  
Thumb Duplication ◽  
Secondary Deformity ◽  
A2 Pulley

This study was undertaken to document the causes of secondary deformities after surgery for correction of Wassel type IV-D thumb duplication. We carefully dissected and observed the flexor pollicis longus, and bone and joint anatomy in eight patients with secondary deformities after surgical correction. We transferred the flexor pollicis longus and thenar muscle attachments, reconstructed the A2 pulley, released and tightened the joint capsule, and performed osteotomies to correct skeletal malalignment. Kirschner wire fixation was used for 4–5 weeks, followed by brace fixation for 3 months. Patients were followed up for 13–34 months (mean 20 months). According to the Tada scores, the outcomes were good in six patients, and fair and poor in one patient each. The main causes of the secondary deformities were failure to reconstruct the A2 pulley, to transfer the flexor pollicis longus and thenar muscles, and incomplete resection of the radial metacarpal head. Brace fixation after Kirschner wire removal is crucial in preventing secondary deformities. Level of evidence: IV

Robust thumb flexor tendon repairs with a six-strand M-Tang method, pulley venting, and early active motion

2017 ◽  
Vol 42 (9) ◽  
pp. 909-914 ◽  
Author(s):  
Z. J. Pan ◽  
J. Qin ◽  
X. Zhou ◽  
J. Chen
Keyword(s):  
Flexor Tendon ◽  
Tendon Repair ◽  
Level Of Evidence ◽  
Active Motion ◽  
Post Surgery ◽  
A2 Pulley ◽  
Tendon Ruptures ◽  
Flexor Pollicis Longus Tendon ◽  
Thumb Motion ◽  
Tendon Laceration

We present the outcomes of flexor pollicis longus tendon repairs in 34 thumbs using a six-strand M-Tang repair with venting of one or two pulleys according to site of tendon laceration. The A2 pulley was vented in all three thumbs with zone 1 injury. In 31 thumbs with zone 2 injuries, the oblique pulley was vented partially or entirely. Twenty-two thumbs had both the A1 and oblique pulleys vented. Six to 46 months post-surgery, 14 thumbs with zone 2 injuries were rated excellent, 13 good, three fair and one failure according to Tang criteria. No tendon ruptures or bowstringing occurred. Fourteen of 34 thumbs had deficits in interphalangeal joint extension averaging 13°. We conclude that venting of one or two pulleys may ensure recovery of thumb function without risking tendon bowstringing and that early active thumb motion is safe with a robust tendon repair. Level of evidence: IV

Correction of Wassel type IV thumb duplication with zigzag deformity: results of a new method of flexor pollicis longus tendon relocation

2012 ◽  
Vol 38 (3) ◽  
pp. 272-280 ◽  
Author(s):  
C. H. Lee ◽  
H. Y. Park ◽  
J. O. Yoon ◽  
K. W. Lee
Keyword(s):  
Treatment Algorithm ◽  
Suture Technique ◽  
Flexor Pollicis Longus ◽  
Longus Tendon ◽  
Type Iv ◽  
Pull Out ◽  
Thumb Duplication ◽  
Flexor Pollicis Longus Tendon ◽  
Pull Out Suture

The purpose of this study is to present a treatment algorithm and a method of flexor pollicis longus tendon relocation for Wassel type IV thumb duplication with zigzag deformity. Forty-two thumbs in 42 patients were included in this study and the mean follow-up was 4 years. In addition to excision of the extra digit, tendon relocation and metacarpal and/or proximal phalangeal osteotomy were carried out, based on the degree of angulation at the metacarpophalangeal and interphalangeal joints. Tendon relocation was achieved using our pull-out suture technique. The results were assessed using an evaluation form for thumb polydactyly provided by the Japanese Society for Surgery of the Hand. At the time of latest clinical contact, eight cases were rated good, 31 cases fair, and three cases poor. It is useful to decide surgical procedures according to the degree of angulation of the metacarpophalangeal and interphalangeal joints and flexor pollicis longus tendon relocation is important to prevent malalignment at the interphalangeal joint.

MRI analysis and surgical treatment of Wassel Type IV duplicated thumbs

2021 ◽  
pp. 175319342098321
Author(s):  
Anyuan Wang ◽  
Jian Ding ◽  
Long Wang ◽  
Tinggang Chu ◽  
Zhipeng Wu ◽  
...  
Keyword(s):  
Type A ◽  
Surgical Reconstruction ◽  
Mri Findings ◽  
Level Of Evidence ◽  
Type D ◽  
Type Iv ◽  
Secondary Operations ◽  
Type C

We present the MRI findings for 39 Wassel Type IV duplicated thumbs in 38 patients. We found that MRI revealed the morphology of the cartilaginous connection between the thumb anlages and the location of the deviation corresponding to the classification of Horii, which allowed precise preoperative planning of corrective osteotomies. All 39 thumbs were available for follow-up after surgical reconstruction at a mean of 29 months (range 25 to 39). Four out of nine Horii Type A cases and all 12 Type B, as well as the six Type C and the six Type D cases, achieved good results according to the Tada scoring system. Five Type A cases achieved fair results with residual stiffness of the interphalangeal joint. No secondary operations were needed. We conclude that MRI proved useful in subclassifying Wassel Type IV duplicated thumbs and may aid in planning the osteotomies needed for their reconstruction. Level of evidence: IV

scholarly journals Correlation of Ultrasound Findings With Clinical Stages and Impairment in Adhesive Capsulitis of the Shoulder

2021 ◽  
Vol 9 (5) ◽  
pp. 232596712110036
Author(s):  
Jong Geol Do ◽  
Jin Tae Hwang ◽  
Kyung Jae Yoon ◽  
Yong-Taek Lee
Keyword(s):  
Structural Changes ◽  
External Rotation ◽  
Biceps Tendon ◽  
Adhesive Capsulitis ◽  
Case Series ◽  
Tendon Sheath ◽  
Level Of Evidence ◽  
Cutoff Values ◽  
Diagnostic Values ◽  
Ultrasound Parameters

Background: Ultrasound is an essential tool for diagnosing shoulder disorders. However, the role of ultrasound in assessing and diagnosing adhesive capsulitis has not been fully studied. Purpose: To evaluate the ultrasound features of adhesive capsulitis and estimate the correlations between clinical impairment and ultrasound parameters. Study Design: Case series; Level of evidence, 4. Methods: A total of 61 patients with clinically diagnosed unilateral adhesive capsulitis were retrospectively reviewed using high-resolution ultrasound. To compare ultrasound parameters, we performed ultrasound examinations on both affected and unaffected shoulders. Ultrasound parameters, including thickness of the coracohumeral ligament (CHL), rotator interval (RI), axillary recess (AR), hypervascularity of the RI, and effusion of the long head of the biceps tendon sheath, were measured. Passive range of motion (PROM), visual analog scale for pain, and the Shoulder Pain and Disability Index were used for clinical assessment. Results: The CHL, the RI, and the AR in affected shoulders were significantly thicker than in unaffected shoulders ( P < .05). CHL thickness in affected shoulders was significantly correlated with PROM limitation, which included forward elevation, abduction, external rotation (ER), and internal rotation (IR) ( P < .05). AR thickness correlated with passive forward elevation limitation and passive IR limitation ( P < .05). The CHL was significantly thicker in stage 2 compared with stage 1, and the RI was thicker in stage 2 compared with stage 3. The diagnostic cutoff values for adhesive capsulitis were 2.2 mm for CHL thickness (77% sensitivity, 91.8% specificity) and 4 mm for AR thickness (68.9% sensitivity, 90.2% specificity). Conclusion: The ultrasound parameters associated with structural changes were correlated with clinical characteristics of adhesive capsulitis. Thickened CHL, RI, and AR were observed in affected shoulders. The cutoff values of 2.2 mm for CHL thickness and 4 mm for AR thickness can be used as cutoff diagnostic values for adhesive capsulitis.

Radiographic Correlation of Hallux MP Fusion Position and Plate Angle

2009 ◽  
Vol 30 (9) ◽  
pp. 873-876 ◽  
Author(s):  
J. Thaddeus Leaseburg ◽  
James K. DeOrio ◽  
Shane A. Shapiro
Keyword(s):  
Weight Bearing ◽  
Proximal Phalanx ◽  
Case Series ◽  
Statistical Correlation ◽  
Titanium Plate ◽  
Care Needs ◽  
Retrospective Case ◽  
Level Of Evidence ◽  
Lower Correlation ◽  
Proper Weight

Background: This study assessed the variability of plate bend in regard to final metatarsophalangeal (MP) fusion angles and toe-to-floor distance. We hypothesized that the final MP angle, the angle of the proximal phalanx to the floor, and the weightbearing toe-to-floor distance would be dictated solely by the magnitude of the bend in the plate. Materials and Methods: This is a retrospective analysis of 35 sequential patients who underwent MP fusion with a low-contour titanium plate. Postoperative weightbearing radiographs were analyzed for plate angle, MP fusion angle, the angle of the proximal phalanx to the floor, and the weightbearing toe-to-floor distance. Results: We found statistical correlation between plate angle and MP angle and between plate angle and the angle of the proximal phalanx to the floor. However, there was low correlation between plate angle and with toe-to-floor distance. In addition, we noted many outliers, which resulted in higher or lower correlation of the MP angle to the expected plate angle and, thus, a relationship between angles that was far from linear. Conclusion: Care needs to be taken when relying solely on the bend in the plate to determine the final position of the toe in MP fusions. Although the association between plate bend and MP angle and proximal phalanx to floor angle was strong, the association between the bend in the plate and weight bearing toe-to-floor distance was variable. This could result in the toe hitting the shoe or the need to vault over the toe. Therefore, the surgeon must match the plate to each patient's anatomy to ensure proper weight bearing toe-to-floor distance and not rely on plate angle exclusively. Level of Evidence: IV, Retrospective Case Series

Transthecal Digital Nerve Block

1998 ◽  
Vol 23 (4) ◽  
pp. 490-493 ◽  
Author(s):  
N. S. SARHADI ◽  
J. SHAW-DUNN
Keyword(s):  
Methylene Blue ◽  
Nerve Block ◽  
Flexor Tendon ◽  
Proximal Phalanx ◽  
Proximal Part ◽  
Tendon Sheath ◽  
Areolar Tissue ◽  
Digital Nerve ◽  
Flexor Tendon Sheath ◽  
Digital Nerve Block

Injection studies using methylene blue and latex were used in 60 digits from 40 cadavers to study how anaesthetic fluid injected into the flexor tendon sheath might spread around the proximal part of the finger. The injected solution escaped from the flexor tendon sheath around the vincular vessels which are present near the base and head of the proximal phalanx. Outside the digital canal, the dye flowed smoothly through the perivascular loose areolar tissue and spread alongside the main digital vessels and nerves and their palmar and dorsal branches.

Clinical results of releasing the entire A2 pulley after flexor tendon repair in zone 2C

2016 ◽  
Vol 41 (8) ◽  
pp. 822-828 ◽  
Author(s):  
K. Moriya ◽  
T. Yoshizu ◽  
N. Tsubokawa ◽  
H. Narisawa ◽  
K. Hara ◽  
...  
Keyword(s):  
Flexor Tendon ◽  
Tendon Repair ◽  
Clinical Results ◽  
The Other ◽  
Flexor Tendon Repair ◽  
Level Of Evidence ◽  
A2 Pulley ◽  
Active Mobilization ◽  
Finger Motion

We report the results of complete release of the entire A2 pulley after zone 2C flexor tendon repair followed by early postoperative active mobilization in seven fingers and their comparisons with 33 fingers with partial A2 pulley release. In seven fingers, release of the entire A2 pulley was necessary to allow free gliding of the repairs in five fingers and complete release of both the A2 and C1 pulleys was necessary in two. No bowstringing was clinically evident in any finger. Two fingers required tenolysis. Using Tang’s criteria, the function of two digits was ranked as excellent, four good and one fair; there was no failure. The functional return in these seven fingers was similar with that in 33 fingers with partial A2 pulley release; in these patients only one finger required tenolysis. Our results support the suggestion that release of the entire A2 pulley together with the adjacent C1 pulley does not clinically affect finger motion or cause tendon bowstringing, provided that the other pulleys are left intact. Level of evidence: IV

Predictors of outcome after primary flexor tendon repair in zone 1, 2 and 3

2016 ◽  
Vol 41 (8) ◽  
pp. 793-801 ◽  
Author(s):  
I. Z. Rigo ◽  
M. Røkkum
Keyword(s):  
Flexor Tendon ◽  
Linear Regression Analysis ◽  
Tendon Repair ◽  
Tendon Sheath ◽  
Multiple Linear Regression Analysis ◽  
Level Of Evidence ◽  
Pulley System ◽  
Skeletal Injury ◽  
Active Mobilization

We retrospectively reviewed the outcomes of flexor tendon repairs in zones 1, 2 and 3 in 356 fingers in 291 patients between 2005 and 2010. The mean (standard deviation) active ranges of motion of two interphalangeal joints of the fingers were 98° (40) and 114° (45) at 8 weeks postoperatively and at the last follow-up (mean 7 months, range 3–98), respectively. Using the Strickland criteria, ‘excellent’ or ‘good’ function was obtained in 95 (30%) out of 322 fingers at 8 weeks and 107 (48%) out of 225 fingers at the last follow-up. A total of 48 (13%) fingers required reoperation because of rupture, adhesion, contracture or other complications. The prevalence of rupture was 4%. We carried out multiple linear regression analysis to identify the predictors of the active digital motion. The following variables were found as negative predictors: age; smoking; injury localization between subzones 1C and 2C; injury to the little finger; the extent of soft tissue damage; concomitant skeletal injury; delay to surgery; use of a 2-strand Kessler repair technique; attempted suture or preservation of the tendon sheath–pulley system; and resecting or leaving the concomitant superficial flexor tendon cuts untreated. Analysing the 8 weeks results of tendon repairs in zones 1 and 2, early active mobilization was found to be superior to Kleinert’s regime. Level of evidence: III

scholarly journals Ipsilateral midshaft clavicle fracture and acromioclavicular joint dislocation: a review of literature and evidence-based diagnosis guidelines

2020 ◽  
Author(s):  
Rongguang Ao ◽  
Zhen Jian ◽  
Jinhong Chen ◽  
Dejian Li ◽  
Xu Zhang ◽  
...  
Keyword(s):  
Clavicle Fracture ◽  
High Energy ◽  
Shoulder Function ◽  
Acromioclavicular Joint Dislocation ◽  
Evidence Based ◽  
Ac Joint ◽  
Level Of Evidence ◽  
Joint Dislocation ◽  
Type Iv ◽  
Ac Joint Dislocation

Abstract Background: Ipsilateral midshaft clavicle fracture and AC joint dislocation are rare, with very few cases reported. Once the AC joint dislocation were missed diagnosis, the shoulder function may be affected and medical dispute was easy to occur. The aim of this study was to gather data relating to ipsilateral midshaft clavicle fracture and AC joint dislocation to develop evidence-based diagnosis guidelines as none are currently available.Methods: A study was conducted of the PubMed and Google Scholar databases to identify cases of ipsilateral midshaft clavicle fracture and AC joint dislocation. Data collected about each case included age and gender of the patient, mechanism of injury, fracture and dislocation classification. The authors report 2 additional ipsilateral midshaft clavicle fracture and AC joint dislocation cases.Results: 21 cases were identified for inclusion in this research, 19 from the literature and 2 reported by the authors. All the patients were injured by high energy trauma. For the midshaft fracture, 16/21 (76.2%) patients belonged to Type A classification, and 5/21 (23.8%) patients belonged to Type B classification. For AC joint dislocation, 11/21 (47.6%) patients belonged to Type IV classification, 4/21 (19.0%) patients belonged to Type VI classification, 5/21 (23.8%) patients belonged to Type III classification and 1/21 (4.7%) patients belonged to Type V classification.Conclusions: There are limited data available about the diagnosis of ipsilateral midshaft clavicle fracture and AC joint dislocation. From the cases reviewed, we find that simple midshaft clavicle caused by high energy injuries may be associated with ipsilateral AC joint dislocation. Physical examination, careful observation of preoperative X-ray and fluoroscopy including the AC joint during operation were key to diagnose the injury. Level of Evidence Level III, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.

Sign in / Sign up

Export Citation Format

Share Document