Subaxial Cervical Pedicular Screw Insertion via the Nonanatomic Axis: Identification of Entry Point and Trajectory Based on a Radiographic Study and Workshop

Study Design: A radiological study and workshop. Objective: To propose a novel technique for subaxial cervical pedicle screw (CPS) insertion via the nonanatomic axis (nAA) and identify a new entry point (EP) and trajectory based on a radiological study. Methods: The new EP was determined to be the center of the upper half of the lateral mass, and the nAA was defined as the line connecting the EP and center of the pedicle. CT images of 493 subaxial cervical pedicles from 51 adults were utilized. The pedicle axis length (PAL/nPAL), pedicle transverse angle (PTA/nPTA), sagittal and transverse pedicle screw depth ratio (S-DO, T-DO), and sagittal and transverse angles (S-angle, T-angle) were measured in the anatomical axis (AA) and nAA. nAA-CPS insertions were conducted on dry specimens, and the positions of the screws were graded. Results: The nPTA (22.35° ± 1.57°), nPAL (23.75 ± 2.07 mm), T-DO (45.61% ± 3.10%), and S-DO (70.46% ± 4.44%) of the nAA-CPS were significantly different from the PTA (41.86° ± 2.77°), PAL (31.98 ± 2.40 mm), T-DO and S-DO of the AA-CPS (both 100% in ideal conditions), respectively ( P < .05). The T-angle and S-angle were 92.78° ± 3.07° and 92.18° ± 3.78°, respectively. A constant EP and consistent trajectory of the nAA-CPS identified by 2 perpendicular angles were summarized and utilized as the manipulation protocols of the workshop, and a perfect position was achieved in 80.00% (24/30) of screws. Conclusion: The nAA-CPS is a novel alternative to the classic CPS technique. A constant entry point and 2 perpendicular angles in the sagittal and transverse planes for identifying the trajectory of the nAA-CPS should be taken into account in the establishment of a manipulation protocol.