scholarly journals Design and assembly of a domestic water temperature, pH and turbidity monitoring system

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Diana Rita Nanyanzi ◽  
Gilbert Gilibrays Ocen ◽  
Timothy Omara ◽  
Felix Bwire ◽  
Davis Matovu ◽  
...  

Abstract Objective The aim of this study was to design a domestic water temperature, pH and turbidity monitoring system that could constantly log temperature, pH and turbidity of water and give alerts in case the parameters are outside the acceptable limits for potable water. Results The system was designed, assembled and performed as expected. The study indicates that the proposed and designed system outperforms the existing manual monitoring system as it can constantly track and store changes in water quality. This could be used to prepare better treatment processes as well as identify problems in the water distribution system early enough.

2020 ◽  
Author(s):  
Mireia Plà-Castellana ◽  
Julia Roselló-Cano ◽  
Alícia Maestro ◽  
Jordi Raich-Montiu ◽  
Miquel Paraira

<p>Monitoring critical drinking water points in the water distribution system of Barcelona (Catalonia, Spain) is an increasing concern. The control of several quality parameters as free chlorine, total organic carbon (TOC), conductivity, turbidity, temperature, colour, pressure and flow are necessary to ensure a supply of safe and clean drinking water to consumers.</p><p>The aim of this project is to investigate the consequences of alterations detected in the water distribution system, to find the focus of occurrences and controlling them to provide a better drinking water quality to Barcelona citizens.</p><p>Barcelona procures drinking water to its citizens via two main water sources: Ter and Llobregat Rivers. They have intrinsic quality differences and they must be treated in different ways. With the purpose of controlling and investigating how these differences impact the water quality supplies, two s::can sensor systems were installed in the Poblenou District (Barcelona). The first one (nano::station) was installed in a drinking water distribution pipe, and the second one (pipe::scan) was installed in a domestic water supply network. Both systems were situated in the same drinking water confluence sector in order to compare the data recorded and to visualise water quality changes. More than 20 events were recorded, analysed and classified according to whether the alteration was due to an occasional event in the domestic water supply or to an external incident from the water distribution system. Some detected events were related to an increase of temperature, a rise of water demand, the water origins or changes in pressure.</p><p>One important event recorded by the installed probes was an increase of temperature, directly associated with an augment of total organic matter (TOC) at the beginning of summer (June 2018). A great rise of TOC would be the causer of high consumption of free chlorine that it could be hazardous for human health if there is not enough chlorine dissolved in water. Due to this temperature increment (from 15°C to 23°C in a few days), the minimum level of chlorine (less than 0.2 mg/L) was registered in the Poblenou Sector.</p><p>Nano::station and pipe::scan sensor systems are excellent tools as on-line water quality controllers. These kinds of sensors can record variations occurring every two minutes, giving a great perception of the events that are happening at different points of the drinking water city-wide network.</p>


2006 ◽  
Vol 53 (4-5) ◽  
pp. 1-16 ◽  
Author(s):  
G. Olsson

Instrumentation, control and automation (ICA) are key technologies in modern water and wastewater systems. Ever present disturbances make it necessary to automatically attenuate their consequences. A wastewater treatment system is load driven, while a water distribution system is demand driven. Despite the variability the system outputs have to be satisfactory. Economic realities encourages the application of ICA to make a maximum use of plant capacities. An increasing complexity of competing processes in a modern nutrient removal plant makes more elaborate control necessary. The final goal of protecting the environmental resources necessitates an integrated view of several interdependent systems, the collection, transport and treatment processes. In this integrating development ICA will be a decisive technology.


2012 ◽  
Vol 518-523 ◽  
pp. 3703-3706
Author(s):  
Ling Ping Zhao ◽  
Fen Ge Zhang ◽  
Liang Fei Dong ◽  
Yong Wei ◽  
Bao Hua Tu ◽  
...  

According to the fuzziness of water quality in water distribution system, based on the simulation data of water quality obtained by using EPANET software,and applying entropy weight theory in the fuzzy evaluation of water quality, fuzzy evaluation model of water quality based on entropy weight and EPANET is established. Water quality in water distribution system of Hengshanqiao town is evaluated by using this method.Evaluation results are relatively objective and credible, proving that the method is simple and practical, scientific and reliable.


Sign in / Sign up

Export Citation Format

Share Document