Dip correction for coherence-based time migration velocity analysis

Geophysics ◽  
2007 ◽  
Vol 72 (1) ◽  
pp. S41-S48 ◽  
Author(s):  
Jörg Schleicher ◽  
Ricardo Biloti
Keyword(s):  
Optimal Parameter ◽  
Velocity Model ◽  
Migration Velocity ◽  
Velocity Analysis ◽  
Time Migration ◽  
Migration Velocity Analysis ◽  
Processing Step ◽  
Best Fitting ◽  
Two Parameter

Migration velocity analysis (MVA) is a seismic processing step that aims to translate residual moveout in an image gather after migration with an erroneous velocity model into velocity updates. An analysis of the position of a reflection event in an image gather after migration with an incorrect velocity allows us to extend the original coherence-based MVA approach to dipping reflectors. The extended MVA technique includes the reflector dip which is treated as an additional search parameter that is to be detected together with the velocity updating factor. Both parameters are searched for simultaneously by the application of two-parameter search techniques. The search consists of determining trial curves as a function of the search parameters and stacking the migrated data along these curves. The highest coherence determines the best-fitting curve and thus the optimal parameter pair. A numerical example demonstrates that the additional search parameter improves the quality of the velocity updates, thus requiring less iterations in the MVA.

Migration velocity analysis based on focusing diffractions generated using the CRS wavefront attributes: Application to real land data

Geophysics ◽  
2021 ◽  
pp. 1-50
Author(s):  
German Garabito ◽  
José Silas dos Santos Silva ◽  
Williams Lima
Keyword(s):  
Time Domain ◽  
Real Data ◽  
Normal Incidence ◽  
Velocity Model ◽  
Migration Velocity ◽  
Velocity Analysis ◽  
Velocity Models ◽  
Time Migration ◽  
Migration Velocity Analysis ◽  
The Time Domain

In land seismic data processing, the prestack time migration (PSTM) image remains the standard imaging output, but a reliable migrated image of the subsurface depends on the accuracy of the migration velocity model. We have adopted two new algorithms for time-domain migration velocity analysis based on wavefield attributes of the common-reflection-surface (CRS) stack method. These attributes, extracted from multicoverage data, were successfully applied to build the velocity model in the depth domain through tomographic inversion of the normal-incidence-point (NIP) wave. However, there is no practical and reliable method for determining an accurate and geologically consistent time-migration velocity model from these CRS attributes. We introduce an interactive method to determine the migration velocity model in the time domain based on the application of NIP wave attributes and the CRS stacking operator for diffractions, to generate synthetic diffractions on the reflection events of the zero-offset (ZO) CRS stacked section. In the ZO data with diffractions, the poststack time migration (post-STM) is applied with a set of constant velocities, and the migration velocities are then selected through a focusing analysis of the simulated diffractions. We also introduce an algorithm to automatically calculate the migration velocity model from the CRS attributes picked for the main reflection events in the ZO data. We determine the precision of our diffraction focusing velocity analysis and the automatic velocity calculation algorithms using two synthetic models. We also applied them to real 2D land data with low quality and low fold to estimate the time-domain migration velocity model. The velocity models obtained through our methods were validated by applying them in the Kirchhoff PSTM of real data, in which the velocity model from the diffraction focusing analysis provided significant improvements in the quality of the migrated image compared to the legacy image and to the migrated image obtained using the automatically calculated velocity model.

Time-migration velocity analysis by image-wave propagation of common-image gathers

Geophysics ◽  
2008 ◽  
Vol 73 (5) ◽  
pp. VE161-VE171 ◽  
Author(s):  
J. Schleicher ◽  
J. C. Costa ◽  
A. Novais
Keyword(s):  
Wave Propagation ◽  
Seismic Event ◽  
Velocity Model ◽  
Migration Velocity ◽  
Velocity Analysis ◽  
Reference Velocity ◽  
Time Migration ◽  
Migration Velocity Analysis ◽  
Velocity Image ◽  
The Common

Image-wave propagation or velocity continuation describes the variation of the migrated position of a seismic event as a function of migration velocity. Image-wave propagation in the common-image gather (CIG) domain can be combined with residual-moveout analysis for iterative migration velocity analysis (MVA). Velocity continuation of CIGs leads to a detection of those velocities in which events flatten. Although image-wave continuation is based on the assumption of a constant migration velocity, the procedure can be applied in inhomogeneous media. For this purpose, CIGs obtained by migration with an inhomogeneous macrovelocity model are continued starting from a constant reference velocity. The interpretation of continued CIGs, as if they were obtained from residual migrations, leads to a correction formula that translates residual flattening velocities into absolute time-migration velocities. In this way, the migration velocity model can be improved iteratively until a satisfactory result is reached. With a numerical example, we found that MVA with iterative image continuation applied exclusively to selected CIGs can construct a reasonable migration velocity model from scratch, without the need to build an initial model from a previous conventional normal-moveout/dip-moveout velocity analysis.

Migration velocity analysis from locally coherent events in 2‐D laterally heterogeneous media, Part I: Theoretical aspects

Geophysics ◽  
2002 ◽  
Vol 67 (4) ◽  
pp. 1202-1212 ◽  
Author(s):  
Hervé Chauris ◽  
Mark S. Noble ◽  
Gilles Lambaré ◽  
Pascal Podvin
Keyword(s):  
Cost Function ◽  
Velocity Model ◽  
Migration Velocity ◽  
Velocity Estimation ◽  
Velocity Analysis ◽  
Seismic Reflection Data ◽  
Velocity Models ◽  
Migration Velocity Analysis ◽  
Paraxial Ray ◽  
The Cost

We present a new method based on migration velocity analysis (MVA) to estimate 2‐D velocity models from seismic reflection data with no assumption on reflector geometry or the background velocity field. Classical approaches using picking on common image gathers (CIGs) must consider continuous events over the whole panel. This interpretive step may be difficult—particularly for applications on real data sets. We propose to overcome the limiting factor by considering locally coherent events. A locally coherent event can be defined whenever the imaged reflectivity locally shows lateral coherency at some location in the image cube. In the prestack depth‐migrated volume obtained for an a priori velocity model, locally coherent events are picked automatically, without interpretation, and are characterized by their positions and slopes (tangent to the event). Even a single locally coherent event has information on the unknown velocity model, carried by the value of the slope measured in the CIG. The velocity is estimated by minimizing these slopes. We first introduce the cost function and explain its physical meaning. The theoretical developments lead to two equivalent expressions of the cost function: one formulated in the depth‐migrated domain on locally coherent events in CIGs and the other in the time domain. We thus establish direct links between different methods devoted to velocity estimation: migration velocity analysis using locally coherent events and slope tomography. We finally explain how to compute the gradient of the cost function using paraxial ray tracing to update the velocity model. Our method provides smooth, inverted velocity models consistent with Kirchhoff‐type migration schemes and requires neither the introduction of interfaces nor the interpretation of continuous events. As for most automatic velocity analysis methods, careful preprocessing must be applied to remove coherent noise such as multiples.

Angle-domain common-image gathers from plane-wave least-squares reverse time migration

Geophysics ◽  
2021 ◽  
pp. 1-60
Author(s):  
Chuang Li ◽  
Zhaoqi Gao ◽  
Jinghuai Gao ◽  
Feipeng Li ◽  
Tao Yang
Keyword(s):  
Inverse Problem ◽  
Plane Wave ◽  
Least Squares ◽  
Migration Velocity ◽  
Velocity Analysis ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Time Migration ◽  
Migration Velocity Analysis ◽  
Amplitude Versus

Angle-domain common-image gathers (ADCIGs) that can be used for migration velocity analysis and amplitude versus angle analysis are important for seismic exploration. However, because of limited acquisition geometry and seismic frequency band, the ADCIGs extracted by reverse time migration (RTM) suffer from illumination gaps, migration artifacts, and low resolution. We have developed a reflection angle-domain pseudo-extended plane-wave least-squares RTM method for obtaining high-quality ADCIGs. We build the mapping relations between the ADCIGs and the plane-wave sections using an angle-domain pseudo-extended Born modeling operator and an adjoint operator, based on which we formulate the extraction of ADCIGs as an inverse problem. The inverse problem is iteratively solved by a preconditioned stochastic conjugate gradient method, allowing for reduction in computational cost by migrating only a subset instead of the whole dataset and improving image quality thanks to preconditioners. Numerical tests on synthetic and field data verify that the proposed method can compensate for illumination gaps, suppress migration artifacts, and improve resolution of the ADCIGs and the stacked images. Therefore, compared with RTM, the proposed method provides a more reliable input for migration velocity analysis and amplitude versus angle analysis. Moreover, it also provides much better stacked images for seismic interpretation.

Kinematics of common-image gathers — Part 1: Theory

Geophysics ◽  
2019 ◽  
Vol 84 (5) ◽  
pp. S437-S447 ◽  
Author(s):  
Jean-Philippe Montel ◽  
Gilles Lambaré
Keyword(s):  
Velocity Model ◽  
General Assumption ◽  
Azimuth Angle ◽  
Velocity Analysis ◽  
Migration Process ◽  
Kinematic Behavior ◽  
Migration Velocity Analysis ◽  
Model Update ◽  
The Common

Common-image gathers are a useful output of the migration process. Their kinematic behavior (i.e., the way they curve up or down) is an indicator of the quality of the velocity model used for migration. Traditionally, when used for migration velocity analysis, we pick structural dips in the common attribute panels (offset, angle, etc.) and residual moveout (RMO) in the gathers. The measured RMO will then tell us how much we need to update the velocity model to improve the gather’s flatness. Understanding the kinematics of the picked events is the key to an accurate model update. This point has been widely underestimated in many cases. For example, when dealing with angle gathers, there is a general assumption that the associated tomographic rays are fully defined by the picked structural dips and the gather opening and azimuth angle, and that if the velocity model is correctly updated down to a given horizon, it is not necessary to shoot the tomographic rays upward through this horizon. We find through an original theoretical analysis that both of these assumptions have to be modified when the gathers exhibit RMO. Using a kinematic analysis, we determine that knowledge of the RMO slopes is necessary to compute the tomographic rays.

Sign in / Sign up

Export Citation Format

Share Document