Seismic Wave Field Model Excited by a Finite Long Cylindrical Charge

Geophysics ◽  
2022 ◽  
pp. 1-60
Author(s):  
Qian Xu ◽  
Zhong-Qi Wang ◽  
Wengong Han ◽  
Chenglong Yu

The amplitude-frequency characteristic of a seismic wave excited by explosion sources directly affects the accuracy of seismic exploration. To reveal the effect law related to a cylindrical charge, the research proposes a seismic wavefield model excited by a long cylindrical charge. According to the characteristics of the blasting cavity generated by a finite length cylindrical charge, the seismic wavefield characteristics of a cylindrical charge excitation is obtained by superposing the seismic wavefield excited by a series of spherical charges. Numerical simulation results show that the calculation error of the blasting cavity characteristics of the theoretical model is within 10%. The comparison with field experimental results shows that the error of the model is within 9.4%. The velocity field of the excited seismic wave is almost the same as that of the spherical charge when the explosion distance to the cylindrical charge with finite length is 16-21 times longer than the charge length, but the frequency of the seismic wave is 30% higher than for a spherical charge. Moreover, the explosive velocity has a certain influence on the amplitude-frequency characteristic of the seismic wave excited by the cylindrical charge. The established theoretical model can accurately describe the amplitude-frequency characteristics of the seismic wavefield excited by a cylindrical charge with finite length.

Author(s):  
B. Simoens ◽  
M. H. Lefebvre ◽  
J. K. Asahina ◽  
F. Minami ◽  
R. E. Nickell

Detonation chambers (either mobile or fixed) are used worldwide for a wide range of applications. At present, a 1/7 scale model of a 1 ton detonation chamber is available for extended testing in Belgium. The chamber is a single wall cylindrical vessel with semi-elliptical ends. Each time an explosive charge is fired in the vessel, that vessel is submitted to a number of deformation cycles. A series of strain gages measure the deformation of the vessel walls. Experimental peak strains and vibration frequency can be compared to predicted values based on simple formulas. Measured values are reasonably close to the estimated values. The influence of the shape of the charge is studied. The shape has an important influence on the chamber response. For a fixed charge mass, a spherical charge causes less deformation than a cylindrical charge and is therefore advantageous from a fatigue point of view.


Sign in / Sign up

Export Citation Format

Share Document