It is difficult to monitor lightning damage to carbon fibre-reinforced polymers (CFRPs) online. This work experimentally investigates the changes associated with the electrical resistance of CFRPs subjected to lightning strikes. Two kinds of simulated lightning currents with different amplitudes in the range of 10–80 kA were injected into the CFRP samples. By measuring and comparing the changes in the struck-side (front) surface resistance, the surface resistance of the side opposite to the struck-side (back) and the oblique resistance of each sample before and after the lightning strike, it was observed that inflection points exist in the curve of the resistance change rate. The resistance decreases with increasing peak currents before the inflection point and increases when the peak current goes beyond the inflection point. The change rate of the front surface resistance is more sensitive to the lightning damage than are those of the back surface resistance and the oblique resistance. Different simulated lightning currents have approximately the same action integrals at the inflection points of resistance change rate. The characteristics indicate that resistance change detection could be a possible method for the online monitoring of CFRP lightning damage.
Environmental and financial performance of mechanical recycling of carbon fibre reinforced polymers and comparison with conventional disposal routes
