Kinematic hardening model predictions of sand behavior under large three-dimensional stress reversals

2004 ◽  
pp. 57-62
Author(s):  
Jerry Yamamuro ◽  
Poul Lade ◽  
Suresh Gutta
Keyword(s):  
Kinematic Hardening ◽  
Three Dimensional ◽  
Hardening Model ◽  
Model Predictions ◽  
Stress Reversals

Three-dimensional plasticity with kinematic and isotropic hardening

2020 ◽  
pp. 421-428
Author(s):  
Lallit Anand ◽  
Sanjay Govindjee
Keyword(s):  
Plastic Strain ◽  
Kinematic Hardening ◽  
Three Dimensional ◽  
Small Strain ◽  
Back Stress ◽  
Isotropic Hardening ◽  
Evolution Law ◽  
Hardening Model ◽  
Rate Dependent ◽  
Viscoplastic Models

This chapter provides an introduction to combined isotropic-kinematic hardening plasticity models in the three-dimensional small strain setting. The additive decomposition of the strain is introduced along with the concepts of plastic strain, equivalent tensile plastic strain, and back stress for three-dimensional problems. Plastic flow is discussed and defined, and a complete model of plasticity is formulated with Kuhn-Tucker loading/unloading conditions. The kinematic hardening model is based upon the Armstrong-Fredrick evolution law. Both rate-independent and rate-dependent (viscoplastic) models are discussed.

3D Numerical Simulation of Polydisperse Pressurized Gas-Solid Fluidized Bed

2011 ◽  
Author(s):  
P. Fede ◽  
O. Simonin ◽  
I. Ghouila
Keyword(s):  
Numerical Simulation ◽  
Fluidized Bed ◽  
Ethylene Polymerization ◽  
Solid Phase ◽  
Three Dimensional ◽  
Gas Velocity ◽  
Particle Segregation ◽  
3D Numerical Simulation ◽  
Model Predictions ◽  
The Mean

Three dimensional unsteady numerical simulations of dense pressurized polydisperse fluidized bed have been carried out. The geometry is a medium-scale industrial pilot for ethylene polymerization. The numerical simulation have been performed with a polydisperse collision model. The consistency of the polydisperse model predictions with the monodisperse ones is shown. The results show that the pressure distribution and the mean vertical gas velocity are not modified by polydispersion of the solid phase. In contrast, the solid particle species are not identically distributed in the fluidized bed indicating the presence of particle segregation.

scholarly journals Analysis of Undrained Seismic Behavior of Shallow Tunnels in Soft Clay Using Nonlinear Kinematic Hardening Model

2020 ◽  
Vol 10 (8) ◽  
pp. 2834
Author(s):  
Mohsen Saleh Asheghabadi ◽  
Xiaohui Cheng
Keyword(s):  
Finite Element ◽  
Kinematic Hardening ◽  
Soft Clay ◽  
Hysteresis Loops ◽  
Stiffness Degradation ◽  
Triaxial Tests ◽  
Embedment Depth ◽  
Ground Acceleration ◽  
Cyclic Shear ◽  
Hardening Model

In this study, a soil–tunnel model for clay under earthquake loading is analyzed, using finite element methods and a kinematic hardening model with the Von Mises failure criterion. The results are compared with those from the linear elastic–perfectly plastic Mohr–Coulomb model. The latter model does not consider the stiffness degradation caused by imposing cyclic loading and unloading to the soil, whereas the kinematic hardening model can simulate this stiffness degradation. The parameters of the kinematic hardening model are calibrated based on the results of experimental cyclic tests and finite element simulation. Here, two methods—one using data from cyclic shear tests, and the other a new method using undrained cyclic triaxial tests—are used to calibrate the parameters. The parameters investigated are the peak ground acceleration (PGA), tunnel lining thickness, tunnel shape, and tunnel embedment depth, all of which have an effect on the resistance of the shallow tunnel to the stresses and deformations caused by the surrounding clay soils. The results show that unlike traditional models, the nonlinear kinematic hardening model can predict the response reasonably well, and it is able to create the hysteresis loops and consider the soil stiffness degradation under the seismic loads.

Sign in / Sign up

Export Citation Format

Share Document