Quantification of 6-Degree-of-Freedom Chassis Whole-Body Vibration in Mobile Heavy Vehicles Used in the Steel Making Industry

2012 ◽  
Vol 31 (2) ◽  
pp. 85-104 ◽  
Author(s):  
Leanne F. Conrad ◽  
Michele L. Oliver ◽  
Robert J. Jack ◽  
James P. Dickey ◽  
Tammy Eger
Author(s):  
Nicolas V. Jaumard ◽  
Hassam A. Baig ◽  
Benjamin B. Guarino ◽  
Beth A. Winkelstein

Whole body vibration (WBV) can induce a host of pathologies, including muscle fatigue and neck and low back pain [1,2]. A new model of WBV in the rat has been developed to define relationships between WBV exposures, kinematics, and behavioral sensitivity (i.e. pain) [3]. Although in vivo studies provide valuable associations between biomechanics and physiology, they are not able to fully define the mechanical loading of specific spinal regions and/or the tissues that may undergo injurious loading or deformation. Mathematical models of seated humans and primates have been used to estimate spinal loads and design measures that mitigate them during WBV [4–6]. Although such models provide estimates of relative spinal motions, they have limited utility for relating potentially pathological effects of vibration-induced kinematics and kinetics since those models do not enable simultaneous evaluation of relevant spinal tissues with the potential for injury and pain generation. As such, the goal of this work was to develop and validate a three degree of freedom (3DOF) lumped-parameter model of the prone rat undergoing WBV directed along the long-axis of the spine. The model was constructed with dimensions of a generalized rat and model parameters optimized using kinematics over a range of frequencies. It was validated by comparing predicted and measured transmissibility and further used to predict spinal extension and compression, as well as acceleration, during WBV for frequencies known to produce resonance in the seated human and pain in the rat [3,7].


2008 ◽  
Vol 38 (9-10) ◽  
pp. 739-757 ◽  
Author(s):  
Sarah Cation ◽  
Robert Jack ◽  
Michele Oliver ◽  
James P. Dickey ◽  
Natasha K. Lee-Shee

Ergonomics ◽  
2010 ◽  
Vol 53 (5) ◽  
pp. 696-715 ◽  
Author(s):  
R. J. Jack ◽  
M. Oliver ◽  
J. P. Dickey ◽  
S. Cation ◽  
G. Hayward ◽  
...  

Author(s):  
Bengt J�rvholm ◽  
Ronnie Lundstr�m ◽  
Henrik Malchau ◽  
B�rje Rehn ◽  
Eva Ving�rd

Author(s):  
X. Y. Xie ◽  
R. B. Bhat ◽  
P.-E. Boileau

Abstract The human body behaves like a vibrating physical system having mass, elastic and damping properties. In order to study the biodynamic behavior of the body, it is common practice to model the body as a lumped single or a multiple-degree-of-freedom (MDOF) system. Standards have been developed using the frequency-weighted root-mean-square (rms) acceleration input to the body as the primary measure of whole-body vibration exposure. In this paper, absorbed power during exposure to vertical whole-body vibration is considered as a potential indicator of the physical stress affecting comfort and health. A four-degree-of-freedom biodynamic model is chosen to represent the body and the absorbed power for the different body segments and the total body is computed. On the basis of the model and of the guidance provided in ISO 2631-1:1997 relating vibration exposure with health risk, computations are carried out to define a health guidance caution zone based on absorbed power.


Sign in / Sign up

Export Citation Format

Share Document