11410 Friction and wear properties of diamond-like carbon film on high speed tool steel (SKH51)

2008 ◽  
Vol 2008.14 (0) ◽  
pp. 45-46
Author(s):  
Masahiro Kawaguchi ◽  
Saiko Aoki ◽  
Atsushi Mitsuo ◽  
Kazuo Morikawa ◽  
Satoshi Uchida
2002 ◽  
Vol 413 (1-2) ◽  
pp. 104-109 ◽  
Author(s):  
Wei Zhang ◽  
Akihiro Tanaka ◽  
Koichiro Wazumi ◽  
Yoshinori Koga

Lubricants ◽  
2019 ◽  
Vol 7 (2) ◽  
pp. 11 ◽  
Author(s):  
Jankhan Patel ◽  
Amirkianoosh Kiani

In this study, reduced graphene oxide (rGO) nano platelets were used as an additive to enhance friction and wear properties of oil-based lubricants by preparing three samples at 0.01% w/w, 0.05% w/w, and 0.1% w/w concentrations. To analyze the direct effect of rGO nano platelets on tribological properties, 99.9% pure oil was used as a liquid lubricant. A comparative tribological study was done by performing a ball-on-disk wear test in situ under harsh conditions, which was further analyzed using a non-contact 3D optical profilometer. Morphological evaluation of the scar was done using transmission and scanning electron microscopy (TEM, SEM) at micro and nano levels. The lubricants’ physical properties, such as viscosity and oxidation number, were evaluated and compared for all samples including pure oil (control sample) as per ASTM standards. Findings of all these tests show that adding rGO nano platelets at 0.05% w/w showed significant reduction in friction at high speed and in wear up to 51.85%, which is very promising for increasing the life span of moving surfaces in machinery. Oxidation and viscosity tests also proved that adding rGO nano platelets to all samples does not sacrifice the physical properties of the lubricant, while it improves friction and wear properties.


1991 ◽  
Vol 196 (1) ◽  
pp. L25-L29 ◽  
Author(s):  
E.-L. Yang ◽  
A. Anttila ◽  
R.O. Toivanen ◽  
J.-P. Hirvonen

2017 ◽  
Vol 113 ◽  
pp. 389-398 ◽  
Author(s):  
Kouami Auxence Melardot Aboua ◽  
Noritsugu Umehara ◽  
Hiroyuki Kousaka ◽  
Xingrui Deng ◽  
Haci Abdullah Tasdemir ◽  
...  

Shinku ◽  
1998 ◽  
Vol 41 (7) ◽  
pp. 633-636
Author(s):  
Yuichi SAKAMOTO ◽  
Hironori SAITO ◽  
Shigekazu TADA ◽  
Masahisa OIKAWA ◽  
Tuyoshi SUZUKI

Sign in / Sign up

Export Citation Format

Share Document