scholarly journals Effects of Reduced Graphene Oxide (rGO) at Different Concentrations on Tribological Properties of Liquid Base Lubricants

Lubricants ◽  
2019 ◽  
Vol 7 (2) ◽  
pp. 11 ◽  
Author(s):  
Jankhan Patel ◽  
Amirkianoosh Kiani
Keyword(s):  
Graphene Oxide ◽  
Physical Properties ◽  
Reduced Graphene Oxide ◽  
Tribological Properties ◽  
High Speed ◽  
Friction And Wear ◽  
Control Sample ◽  
Wear Properties ◽  
Reduced Graphene ◽  
Friction And Wear Properties

In this study, reduced graphene oxide (rGO) nano platelets were used as an additive to enhance friction and wear properties of oil-based lubricants by preparing three samples at 0.01% w/w, 0.05% w/w, and 0.1% w/w concentrations. To analyze the direct effect of rGO nano platelets on tribological properties, 99.9% pure oil was used as a liquid lubricant. A comparative tribological study was done by performing a ball-on-disk wear test in situ under harsh conditions, which was further analyzed using a non-contact 3D optical profilometer. Morphological evaluation of the scar was done using transmission and scanning electron microscopy (TEM, SEM) at micro and nano levels. The lubricants’ physical properties, such as viscosity and oxidation number, were evaluated and compared for all samples including pure oil (control sample) as per ASTM standards. Findings of all these tests show that adding rGO nano platelets at 0.05% w/w showed significant reduction in friction at high speed and in wear up to 51.85%, which is very promising for increasing the life span of moving surfaces in machinery. Oxidation and viscosity tests also proved that adding rGO nano platelets to all samples does not sacrifice the physical properties of the lubricant, while it improves friction and wear properties.

scholarly journals Friction and Wear Behaviors of Reduced Graphene Oxide- and Carbon Nanotube-Reinforced Hydroxyapatite Bioceramics

2020 ◽  
Vol 7 ◽  
Author(s):  
Huanlong Hu ◽  
Zhong Li ◽  
Wen Sun ◽  
Ruitao Li ◽  
Hua Li ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Carbon Nanotube ◽  
Reduced Graphene Oxide ◽  
Friction And Wear ◽  
Solid Lubrication ◽  
Wear Properties ◽  
Reduced Graphene ◽  
Friction And Wear Properties

Friction and wear properties play an important role in the long-term in vivo performance of load-bearing bioceramic implants. In this study, the friction and wear behaviors of hydroxyapatite (HA) reinforced with reduced graphene oxide (rGO) and rGO + carbon nanotube (CNT) hybrids were studied by ball-on-disk tests to understand the effects of nanocarbon content and morphology on the composites’ tribological behaviors. The intact and worn surfaces were characterized by optical microscopy, nanoindentation, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, and Raman spectroscopy. We found that the incorporation of rGO and rGO + CNT hybrids in HA bioceramic both improved the friction and wear behaviors, and the highest wear resistance was achieved by employing 1 wt% rGO and 1 wt% CNT as reinforcements. The major reinforcing mechanism was the formation of carbonaceous films between the composite surfaces and counterbody, which served as solid lubrication films that resulted in a lower coefficient of friction, higher hardness, and increased hardness/modulus ratio. Importantly, CNT addition facilitated the uniform distribution of the reinforcements in the HA matrix and the pinning effects of CNT enhanced the connection between rGO and HA.

Preparation and tribological properties of Ag nanoparticles/reduced graphene oxide nanocomposites

2018 ◽  
Vol 70 (9) ◽  
pp. 1684-1691 ◽  
Author(s):  
Leihua Xu ◽  
Yong Zhang ◽  
Dekun Zhang ◽  
Mei Leng
Keyword(s):  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Tribological Properties ◽  
Ag Nanoparticles ◽  
Lubricant Film ◽  
Wear Properties ◽  
Ag Nps ◽  
Content Type ◽  
Lubricant Oil ◽  
Reduced Graphene

Purpose This paper aims to report the tribological behavior of Ag nanoparticles/reduced graphene oxide nanocomposites (Ag/RGO NCs) and Ag nanoparticles (Ag NPs) as a green additive in oil with different concentration and under different friction conditions. Design/methodology/approach The Ag/RGO NCs and Ag NPs were both synthesized in a chemical reduction method. The diameter of silver nanoparticles implanted between RGO sheets was about 25 nm and that of silver sol was 70 nm. The morphology and structure of Ag/RGO NC were characterized by TEM, XRD and FTIR. The tribological properties of Ag/RGO NCs and Ag NPs as lubricant oil additive were evaluated by measuring the friction coefficients and wear of the surface in different condition which were tested on UMT-II. Findings The results indicated that both the additives improved the friction-reduced and anti-wear properties of paraffin oil, and Ag/RGO NCs has better tribological performance than Ag NPs. The excellent tribological properties were attributed to the special structure of Ag/RGO NC and the formation of tribofilm reducing the friction and wear on the shearing surfaces. Research limitations/implications It is relatively difficult to observe the morphology of the lubricant film formed on the friction surface and to analyze the chemical composition at different depths of the lubricant film. Originality/value It is the first time for Ag/RGO NCs to be applied to improve the friction-reduced and anti-wear properties of lubricant oil as additive.

Amorphous Carbon Coatings for Locally Adjusted Tribological Properties in Sheet Bulk Metal Forming

2012 ◽  
Vol 504-506 ◽  
pp. 969-974 ◽  
Author(s):  
Harald Hetzner ◽  
Stephan Tremmel ◽  
Sandro Wartzack
Keyword(s):  
Amorphous Carbon ◽  
Tribological Properties ◽  
Metal Forming ◽  
Friction And Wear ◽  
Wear Properties ◽  
Carbon Coatings ◽  
Bulk Metal ◽  
Bulk Metal Forming ◽  
Friction And Wear Properties ◽  
Amorphous Carbon Coatings

In sheet bulk metal forming, locally adapted friction properties of the contact tool/workpiece are an appropriate means for the targeted enhancement of the material flow, enabling an improved form filling and lowered forming forces. However, the implementation of desirable friction conditions is not trivial. And further, friction is inseparably linked to wear and damage of the contacting surfaces. This calls for a methodological approach in order to consider tribology as a whole already in the early phases of process layout, so that tribological measures which allow fulfilling the requirements concerning local friction and wear properties of the tool surfaces, can already be selected during the conceptual design of the forming tools. Thin tribological coatings are an effective way of improving the friction and wear properties of functional surfaces. Metal-modified amorphous carbon coatings, which are still rather new to the field of metal forming, allow tackling friction and wear simultaneously. Unlike many other types of amorphous carbon, they have the mechanical toughness to be used in sheet bulk metal forming, and at the same time their friction properties can be varied over wide ranges by proper choice of the deposition parameters. Based on concrete research results, the mechanical, structural and special tribological properties of tungsten-modified hydrogenated amorphous carbon coatings (a-C:H:W) are presented and discussed against the background of the tribological requirements of a typical sheet bulk metal forming process.

scholarly journals Tribological Performance Investigation of a Commercial Engine Oil Incorporating Reduced Graphene Oxide as Additive

Nanomaterials ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 386
Author(s):  
Hakan Kaleli ◽  
Selman Demirtaş ◽  
Veli Uysal ◽  
Ioannis Karnis ◽  
Minas M. Stylianakis ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Tribological Behavior ◽  
Control Sample ◽  
Protective Layer ◽  
Steel Ball ◽  
Carbon Accumulation ◽  
Engine Oil ◽  
Wear Scar Diameter ◽  
Reduced Graphene

We investigated the tribological behavior of commercialized, fully synthetic engine oil upon the incorporation of reduced graphene oxide in seven different concentrations between 0.01 and 0.2 wt %. Stability of the prepared samples was assessed by turbidimetry and dynamic light scattering measurements, and their tribological properties through a reciprocating tribometer, using a steel ball on special cut steel blocks. The addition of 0.02 wt % of reduced graphene oxide led to an improvement of the tribological behavior compared to the pristine engine oil, by significantly lowering the friction coefficient by 5% in the boundary lubrication regime. Both the surfaces and the reduced graphene oxide additive were thoroughly characterized by microscopic and optical spectroscopy techniques. We also verified that a protective layer was formed between the worn surfaces, due to the presence of reduced graphene oxide. Carbon accumulation and various additive elements such as Ca, Zn, S and P were detected on the rubbing surfaces of both the ball and the block through energy-dispersive X-ray spectroscopy. Finally, it was shown that the wear scar diameter on the surface of the steel ball was lower by 3%, upon testing the engine oil sample containing reduced graphene oxide at concentration 0.02 wt %, compared to the control sample.

Tribological properties of the epoxy resin-based solid lubricant coating modified by Kevlar fibers

2018 ◽  
Vol 70 (9) ◽  
pp. 1706-1713 ◽  
Author(s):  
Guotao Zhang ◽  
Yanguo Yin ◽  
Ting Xie ◽  
Dan Li ◽  
Ming Xu ◽  
...  
Keyword(s):  
Wear Resistance ◽  
Epoxy Resin ◽  
Tribological Properties ◽  
Dry Friction ◽  
Friction And Wear ◽  
Solid Lubricant ◽  
Transfer Film ◽  
Wear Properties ◽  
Content Type ◽  
Friction And Wear Properties

Purpose This paper aims to obtain high mechanical and good tribological properties of epoxy resin-based coatings under dry friction conditions. Design/methodology/approach Bonded solid lubricant coatings containing Kevlar fibres were prepared by a spraying method. The friction and wear properties of the coatings were experimentally investigated with a face-to-face tribometre under dry friction conditions. Scanning electron microscopy, energy dispersive X-ray spectroscopy and 3D laser scanning technologies were used to characterise the tribological properties. The action mechanism of the Kevlar fibres on a solid lubricant transfer film was also analysed. Findings Adding Kevlar fibres can significantly improve the wear resistance of the coatings. When the Kevlar fibre content increases, the tribological properties of the coatings improve and then worsen. Superior properties are obtained with 0.03 g of Kevlar fibres. Appropriately increasing the load or speed is beneficial to the removal of the outer epoxy resin and the formation of a lubricant film. During friction, the solid lubricants wrapped in the epoxy resin accumulate on the surface to form a transfer film that shows a good self-lubricating performance. In the later friction stage, fatigue cracks occur on the solid lubricant film but cannot connect to one another because of the high wear resistance and the entanglement of the rod-like Kevlar fibres. Thus, no large-area film falls from the matrix, thereby ensuring the long-term functioning of solid lubricant coatings. Originality/value Epoxy resin-based solid lubricant coatings modified by Kevlar fibres were prepared, and their friction and wear properties were investigated. Their tribological mechanisms were also proposed. This work provided a basis for the analysis of the tribological properties and design of bonded solid lubricant coatings containing Kevlar fibres.

Tribological properties of alkylated reduced graphene oxide as lubricant additive

2022 ◽  
Vol 165 ◽  
pp. 107273
Author(s):  
Bo Yu ◽  
Kai Wang ◽  
Xianjuan Pang ◽  
Gensheng Wu ◽  
Jibin Pu ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Tribological Properties ◽  
Lubricant Additive ◽  
Reduced Graphene
Sign in / Sign up

Export Citation Format

Share Document