Temperature measurements of InterMET Inc. aluminum-coated iMET-XQ sensors were tested in an outdoor setting under a variety of solar radiation and wind speed conditions. Twelve unshielded sensors were mounted side-by-side on the tower of a South Alabama Mesonet weather station next to a reference sensor on the tower. The iMET-XQ temperatures were most precise and accurate in solar radiation values that were close to zero, regardless of wind speed. Under overcast conditions, wind speeds of 2 m s−1 were sufficient to obtain precise and accurate temperature measurements. During the day-time, aspiration of wind speeds higher than or equal to 3 m s−1 is sufficient. An iMET-XQ was placed in a radiation shield next to the tower reference sensor to test the need for a radiation shield. A second iMET-XQ was placed unshielded on the tower. The iMET-XQ sensors with aluminum coating do not need to be shielded, but they do need to be aspirated. It is recommended that, when taking temperature measurements using unmanned aerial vehicles (UAV) with iMET-XQ sensors, the UAV either fly at 3 m s−1, be embedded in winds of those speeds, or to use the propeller wash of the UAV to aspirate the sensors.
Qualification of a truly distributed fiber optic technique for strain and temperature measurements in concrete structures