scholarly journals Experimental Temperature Measurements in Miniature Circuit Breaker

2017 ◽  
Vol 4 (3) ◽  
pp. 265-268
Author(s):  
D. Simek ◽  
D. Pecek

Low voltage switching apparatuses efficiency depends on the speed of movement of the switching arc from the contacts to the quenching chamber. The paper is focused on investigation of this movement of an arc. Measurement of radiation spectra of the electric arc burning inside miniature circuit breaker and moving to quenching chamber are presented. Measured radiation spectra contain suitable atomic spectra lines for calculation purposes. The problems connected with the measurements are discussed. The main part of the paper deals with a calculation of temperature of the investigated plasma of the arc. Atomic lines database of National Institute of Standards and Technology was used as a spectral data source for the calculations.

2020 ◽  
Vol 20 (4) ◽  
pp. 1049-1060
Author(s):  
ELENA OTILIA VIRJOGHE ◽  
MIHAIL FLORIN STAN ◽  
COSMIN COBIANU ◽  
NICOLAE FIDEL

Low Voltage Circuit Breakers is used for the switching process in power distribution and control system. This process is accompanied by the occurrence of the electric arc between the fixed and mobile contact pieces of the apparatus. The electric arc is introduced into the quenching chamber formed of ferromagnetic iron splitter plates, divided into short arcs and then the arc may extinguish after passing the current through zero. Behavior of the electric arc in the extinguishing chamber influences the performance of these devices, the ferromagnetic material leading to the improvement of these performances. This article presents the calculation of the magnetic field components in the extinguishing chamber of the low-voltage circuit breaker of the 2000 A, 690 V manufactured by Schneider Electric and to describe the physical phenomenon and mathematical calculation of the electric arc in LVCB. The Ansys Multiphysics program is used to determine the spectrum of magnetic field components. This program is based on the finite element method for solving Maxwell equations.


2008 ◽  
Vol 51 (19-20) ◽  
pp. 4973-4984 ◽  
Author(s):  
L. Piqueras ◽  
D. Henry ◽  
D. Jeandel ◽  
J. Scott ◽  
J. Wild

2002 ◽  
Vol 13 (7) ◽  
pp. 1146-1153 ◽  
Author(s):  
C Brdys ◽  
J P Toumazet ◽  
A Laurent ◽  
J L Ponthenier

2021 ◽  
Author(s):  
Antonello Bonfante ◽  
Arturo Erbaggio ◽  
Eugenia Monaco ◽  
Rossella Albrizio ◽  
Pasquale Giorio ◽  
...  

<p>Currently, the main goal of agriculture is to promote the resilience of agricultural systems in a sustainable way through the improvement of use efficiency of farm resources, increasing crop yield and quality, under climate change conditions. Climate change is one of the major challenges for high incomes crops, as the vineyards for high-quality wines, since it is expected to drastically modify plant growth, with possible negative effects especially in arid and semi-arid regions of Europe. In this context, the reduction of negative environmental impacts of intensive agriculture (e.g. soil degradation), can be realized by means of high spatial and temporal resolution of field crop monitoring, aiming to manage the local spatial variability.</p><p>The monitoring of spatial behaviour of plants during the growing season represents an opportunity to improve the plant management, the farmer incomes and to preserve the environmental health, but it represents an additional cost for the farmer.</p><p>The UAS-based imagery might provide detailed and accurate information across visible and near infrared spectral regions to support monitoring (crucial for precision agriculture) with limitation in bands and then on spectral vegetation indices (Vis) provided. VIs are a well-known and widely used method for crop state estimation. The ability to monitor crop state by such indices is an important tool for agricultural management. While differences in imagery and point-based spectroscopy are obvious, their impact on crop state estimation by VIs is not well-studied. The aim of this study was to assess the performance level of the selected VIs calculated from reconstructed high-resolution satellite (Sentinel-2A) multispectral imagery (13 bands across 400-2500nm with spatial resolution of <2m) through Convolutional Neural Network (CNN) approach (Brook et al., 2020), UAS-based multispectral (5 bands across 450-800nm spectral region with spatial resolution of 5cm) imagery and point-based field spectroscopy (collecting 600 wavelength across  400-1000nm spectral region with a surface footprint of 1-2cm) in application to crop state estimation.</p><p>The test site is a portion of vineyard placed in southern Italy cultivated on Greco cultivar, in which the soil-plant and atmosphere system has been monitored during the 2020 vintage also through ecophysiological analyses. The data analysis will follow the methodology presented in a recently published paper (Polinova et al., 2018).</p><p>The study will connect the method and scale of spectral data collection with in vivo plant monitoring and prove that it has a significant impact on the vegetation state estimation results. It should be noted that each spectral data source has its advantages and drawbacks. The plant parameter of interest should determine not only the VIs type suitable for analysis but also the method of data collection.</p><p>The contribution has been realized within the CNR BIO-ECO project.</p>


2021 ◽  
Author(s):  
Sudipta Sen ◽  
Shahab Mehraeen ◽  
Keyue Smedley

Sign in / Sign up

Export Citation Format

Share Document