Main steam temperature control based on GA-BP optimised fuzzy neural network

Author(s):  
Zhongda Tian
2011 ◽  
Vol 143-144 ◽  
pp. 307-311 ◽  
Author(s):  
Yu Feng Luo ◽  
Lu Lu Liu

In view of the nonlinear, time-variable, long delay, large inertia character of main steam temperature system, the difficult point of control is summarized. The status quo of application study on main steam temperature by fuzzy control, neural network and fuzzy neural network control, genetic algorithms is introduced. And taking "the 600 MW concurrent boiler load in 100%" as an example, carry on the main steam temperature control simulation by means of Matlab/Simulink software. In this simulation, four control strategies are taking for the simulation experiment, and comparing with the traditional PID control algorithm. The simulation results prove that fuzzy neural network control strategies have good robustness, fast response, short setting time, and great potential for the control of main steam temperature.


2014 ◽  
Vol 66 (2) ◽  
Author(s):  
N. A. Mazalan ◽  
A. A. Malek ◽  
Mazlan A. Wahid ◽  
M. Mailah

Main steam temperature control in thermal power plant has been a popular research subject for the past 10 years. The complexity of main steam temperature behavior which depends on multiple variables makes it one of the most challenging variables to control in thermal power plant. Furthermore, the successful control of main steam temperature ensures stable plant operation. Several studies found that excessive main steam temperature resulted overheating of boiler tubes and low main steam temperature reduce the plant heat rate and causes disturbance in other parameters. Most of the studies agrees that main steam temperature should be controlled within ±5 Deg C. Major factors that influenced the main steam temperature are load demand, main steam flow and combustion air flow. Most of the proposed solution embedded to the existing cascade PID control in order not to disturb the plant control too much. Neural network controls remains to be one of the most popular algorithm used to control main steam temperature to replace ever reliable but not so intelligent conventional PID control. Self-learning nature of neural network mean the load on the control engineer re-tuning work will be reduced. However the challenges remain for the researchers to prove that the algorithm can be practically implemented in industrial boiler control.


2011 ◽  
Vol 204-210 ◽  
pp. 1968-1971 ◽  
Author(s):  
Chun Tao Man ◽  
Jia Cui ◽  
Xin Xin Yang ◽  
Jun Kai Wang ◽  
Tian Feng Wang

The batch reactor has strong nonlinearity and hysteresis, the conventional control method is hard to meet the control requirements. According to the batch processes temperature control, this thesis proposed an intelligent control scheme. Combined neural networks with fuzzy logic control, searching and optimized parameters of fuzzy neural network by using Genetic Algorithm (GA), displayed the design method and optimization steps, and the simulation results verify the control scheme which proposed is feasible and effective.


2013 ◽  
Vol 823 ◽  
pp. 384-387
Author(s):  
Ya Juan Chen ◽  
Yue Hong Zhang ◽  
Gen Wang Ying

Using fuzzy neural network to tune PID parameters, and DSP as processor, it was designed that a set of electric boiler temperature control system based on PID parameters self-tuning, including the design of each hardware module and each software subroutine of the system. Experimental results show that compared with the traditional PID temperature control system, this temperature control system has the advantages such as good control effect, easy parameter adjustment, strong anti-jamming capability, better adaptability and robustness, has the feasibility and practical value.


2013 ◽  
Vol 340 ◽  
pp. 517-522
Author(s):  
Yong Wei Lu

it is hard to establish the accurate model by using the traditional PID algorithm, and hard to adjust the system parameter in nonlinear system. In order to solve this problem, this paper proposed PID algorithm based on Fuzzy Neural Network. This algorithm combined PID algorithm, fuzzy control algorithm and neural network algorithm together, and formed one kind intelligent control algorithm. This paper designed and researched this algorithm, and applied in the PLC temperature control system. The experimental result indicated that the fuzzy neural network PID controller improved the controller quality, conquered some question such as variable parameter and nonlinear, and enhanced the systems robustness.


Sign in / Sign up

Export Citation Format

Share Document